Ihave a 35 year old dynatron srx 26 with a garrard deck,2025tc, the stylus cartridge is damaged ,where can i get a genuin replacment. john

You just have to replace them with Epson cartridges . After market units are not worth the trouble and can damage the printer head.

Firstly check all the connections to the cartridge where the stylus fits. If they are OK. Remove them and with the amp on touch each wire -one at a time- with your finger. If the system is OK you should hear on two wires a buzz - one for each channel. If you do replace the cartridge. If you don't, then there's either a bad connection, or a faulty pre-amp inside the stereo.

Use a search engine "garrard 2025tc stylus". Asking us only delays the answer.

Wish I could solve this problem because I have just the same situation. Is this an Epsom thing I wonder. If I find the answer I will come back and let you know.

First check to see you can turn the motor by hand. If it is stiff there's something wrong with the motor. If OK then have a look at the motor. If it works on 12 volts or under, you can attach a 9 volt battery PP9 type to it. If it's 6 volts, use a 6 volt battery! (You might have to remove any wires going to the motor to do the test). This should cause it to spin. If it doesn't it's dead. If it does check the voltage supply to the motor. Also check for broken plastic parts anywhere on the deck.

Sometimes you have to invert a changer and place on padded supports to get access to cartridge. Be sure to identify wire connections to the old cartridge before removal and keep track of cartridge mounting hardware so it doesn't get lost.

Sound to me that your cartridges are old.
Have you put in new cartridges? Make sure, that they are Genuine Epson Cartridges.

Good Luck....

contact this company for help?
service<remove>@turntableneedles.com

Note; take out the <remove> bit from the link to email them?

go to this site?
http://www.needledoctor.com/Online-Store/Turntable they may have it or an equivalent? god luck

Hi-

You are having a hardware problem with the printer, the sensor is damaged. call epson @ 5622761300 for replacement ink and printer.

Hope this helps