Question about Intel DG31PR Motherboard
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Intel DG31PR Motherboard
Did you get an error message during install of the (system with the SATA 160GB drive)? Make sure the 160GB drive is shown in the bios. Than go to the title, Boot in the bios & make sure the SATA 160GB is listed in the boot order. (Preferred 3rd. boot device)
Please go to the SATA drive's manufactures site & download either their bootable floppy or CD setup software. (It’s free)! Use their software to setup the FAT & cluster size on the drive. You can even set other features that neither the bios or windows can do. Format the 160GB drive with the software as well. The manufacture's software does a better job than windows. If the 160GB drive is a SATA 2.0 leave the jumper on the drive alone. The Desktop Board supports four Serial ATA channels (3.0 GB/s) via ICH7, connecting one device per channel.
Again, please run the manufactures setup software for your SATA 160GB drive. (Disconnect any other drives that may be in the system until windows is installed).
Intel's web site here: http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=2839&lang=eng
Good luck ameyaniks!
If I missed something, just let me know.
Posted on Sep 13, 2008
You have a board with 4 SATA ports on it and a SATA HDD. The hardware detection routines will see this and load the SATA drivers. Why would you even want to try to set it up without them?
Posted on Mar 21, 2009
Your Intel DG33FB board by default was already setup for use. Your board has been configured for independent multi-streaming 5.1 audio (using the back panel audio connectors).
Your board should have come with a shielded front panel audio cable to connect front panel audio as shown on page 45, item B. The pin out for the front panel audio header is shown on page 46, table 5.
If you did not receive this cable you may need to contact Intel.
Check the Intel link included, which shows the cable needed for either AC'97 or HD cabling;
Audio standards: AC'97 and HD audio
Most motherboards will not play audio through the rear jacks when the board is connected to the front audio pins.
Intel like other manufactures do not mention this in their manuals.
Thanks for using Fixya!
Posted on Jun 03, 2009
As long as it's either Intel or SPARC (Intel in your case), Solaris will install just fine as long as you meet the minimum requirements.
Posted on Aug 02, 2009
Tips for a great answer:
Sep 18, 2011 | Intel DG31PR Motherboard
Jun 19, 2011 | Computers & Internet
Oct 26, 2010 | Intel DG31PR Motherboard
May 11, 2010 | Intel DG31PR Motherboard
Jan 02, 2010 | Intel DG31PR Motherboard
Nov 10, 2009 | Intel DG31PR Motherboard
Sep 09, 2009 | Intel DG31PR Motherboard
Jun 25, 2009 | Intel DG31PR Motherboard
Jun 03, 2009 | Intel D865GBF Motherboard
Jul 16, 2008 | Intel DG31PR Motherboard
66 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: