Question about Xerox WorkCentre M-24 Color Copier

1 Answer

Where is the waste toner bottle on the xerox workcentre 5030 located at?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Xerox Expert
  • 107 Answers

  1. Open the Waste Toner Bottle Access Door. The door is located on the left hand side of the machine, behind the Bypass Tray.

    Where is the waste toner - wcpro55-waste-replace1.jpg

  2. Pull the colored cap from the top of the bottle and screw the cap onto the opening of the bottle.



    dc555-waste-cap-2.jpg

  3. Remove the used Waste Toner Bottle and dispose of it according to the instructions contained in the new Waste Toner Bottle box.
  4. Unpack the new bottle from its box.
  5. Install the new bottle in the machine. Make sure that the bottle is placed correctly in the machine cover.
  6. Close the Waste Toner Bottle Access Door.

Posted on May 29, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cleaned waste toner out but xerox 7545 wont ecept it says to replace waste tone


You didn't clean the bright plastic bubble at the upper inside end.
If dirty, machine thinks it is still full of toner.

Jun 24, 2014 | Xerox Workcentre 7545/PT 7545PT Color...

2 Answers

Hello, we have a Xerox Workcentre 7545, the waste toner cartridge needs replacing but we don't have the part yet. Can I manually empty the cartridge in the meantime so we can still use the machine? ...


If you can remove the waste toner cartridge go ahead and empty it out manually. Make sure that it is completly clean out. I use compressed air to flush out any residue.

Sep 22, 2011 | Xerox WorkCentre M-24 Color Copier

1 Answer

Instructions to replace waste toner bottle. Where


Which model do you have? Be exact such as WC123 or 4045 etc...??

Jul 01, 2010 | Xerox Office Equipment & Supplies

1 Answer

How do I change the waste filter on a Xerox 5030/5050?


hi, open the front door, release the drum latch,open the metallic plate next to the front door then remove the waste toner bottle

Nov 09, 2009 | Xerox WorkCentre M-24 Color Copier

1 Answer

Waste toner container replacement


Yes you can. But there is a window at the top of the bottle . There is a sensor that looks through that window to sense toner in it. It is a small area about a half inch high and quarter inch wide that bulged out of the top of the bottle.
Poke a hole in it, clean it with a q tip and reseal the opening you make .
That should do it.

Jul 01, 2009 | Xerox WorkCentre M-24 Color Copier

1 Answer

Kyocera fs-c 5030 has a terrible grinding noise in the front. could it possibly be the drum unit(black)


Take all the toner carts out and push down on the units below the toner carts. Make sure the waste bottle is pushed in firmly. More than likely, the waste system is clogged up because the waste bottle was loaded crooked.

Mar 06, 2009 | Zebra Eltron LP 2824 Thermal Printer

3 Answers

How to reset waster toner bottle full Xerox 3535


Here's what I did.

Emptied the waste toner cartridge. Left it out of the machine. Held the microswitch (located to the right of the optical sensors) in the "cartridge in" position with a paperclip. Printed one document. Inserted the waste toner cartridge. Error now gone!

GCC.

Aug 27, 2008 | Xerox DocuColor 3535 Copier

1 Answer

Waste Box Full/Not Installed


There is a plastic waste toner bottle. Depending on the machine it can be located in front or behind a door on back of the machine.
If you go to Xerox.com and click on support, then put in your model number, the support page, type in waste and it should show you how to change the bottle for your model.

Aug 21, 2008 | Xerox Office Equipment & Supplies

Not finding what you are looking for?
Xerox WorkCentre M-24 Color Copier Logo

1,346 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Xeroxrep

Level 1 Expert

33 Answers

Philip Hughes

Level 2 Expert

72 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...