Question about AMP Speakers Pro Karaoke System

1 Answer

Hope you guys can help... I have a laptop Karaoke system. I connect from laptop to 6 channel mixer to speakers. I use a stereo phono to RCA from laptop to mixer. I am experiencing a buzz coming through my speakers. I have tried inserting a mono phono adapter into the computer, and the stereo phono into that adapter, and I've also tried using a sound reducer having a USB connector, and out of that device with RCA to RCA cable to the mixer. No buzz reduction for either. Any suggestions? Thank you so much, Don Erickson

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • AMP Master
  • 5,603 Answers

Yep! Get a decent audio interface that attaches to the PC with a USB connection and uses BALANCED lines to your mixer. I use a UA-25EX Roland/cakewalk as an example. (about $200 and there are cheaper units such as M-Audio Fast Track MKII ) Note these interfaces BOTH record and playback with two channels for stereo.
Essentially the audio board that is in PC's and Laptops are too near the switching noise of the processor and some of that is just bound to get into the audio lines as they don't even have balanced audio lines from the computers. Make sure you use either TRS or XLR balanced cables from whatever interface you get. Also connect ALL interconnected equipment to the same power source or receptacle. You can try to reduce the buzz with the mixer EQ's with what you have, but that sacrifices audio quality.

Posted on Mar 30, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i connect my keyboard and my laptop?


Download USB MIDI driver for yamaha from yamaha website,and install to laptop.
Next:
Make sure the POWER switch on the instrument is set to OFF,then use an AB type USB cable to connect the instrument to the laptop.
After making the connections, turn on the power of the instrument.
Laptop will immediately notify that new hardwares is connecting and automatically install the drivers. Wait until the process is finish.
Thats all. In Ableton,the setting MIDI input must be set to USB MIDI.

Aug 19, 2015 | Yamaha PSRE413 Keyboard

2 Answers

How do you connect tape deck to pmp 4000


Hi, use the RCA/Phono connections for the Tape In & Out. The level will be set by the Master/Main fader. If that is not so convenient (& assuming it's a PMP4000?) there should be a "Main 2" output & connections with the level controlled separately to Main 1 via a Knob / Rotary control over to the right above the "Mono" fader... Hope that helps... Good Luck!

Jul 11, 2014 | Behringer Pmp3000 16 Channel Audio Mixer

1 Answer

Stereo channels of Xenyx 1202 are very very quiet


It sounds as if the input is too low. what happens if you plug whatever is going into the stereo channels into a pair of mono channels. Or are you taking about the phono stereo tape input?
The stereo channels are line level whereas the other channels have both line and mic level inputs, what are you trying to put through the stereo channels? You must make sure the gain switch is set to the -10dB to get the most sensitivity (the mono channels have about -132dB max sensitivity BTW) You probably need a different mixer or possibly a submixer if you are needing more than 4 low level inputs.

May 06, 2014 | Behringer Music

1 Answer

How can i connect a Behringer xenyx 802 mixer to a Fisher TAD 9315


What you've done should have worked on the video input. The phono will not sound like you'd want. Have you made sure the mixer is working correctly by trying it plugged into a different amp using the same outputs and cable?

Mar 14, 2017 | Music

1 Answer

Not receiving STEREO output when toggle switch for mixer is in the STEREO position


Here are a couple of steps you can do first before opening up the mixer & I'll word this so that it covers every potential item, (Turntables, CDJ's, Rack Mount CD Players, External Player, PC, Laptop, etc.) Obviously there are a multitude of items that could be the cause of you only receiving your RIGHT MASTER OUT since you didnt specify what item this occurs with if not all. So here's a quick legend for you to follow my references regarding the NUMARK 5000FX Mixer so here we go:
*******************************************************************************
MIC/Line Phono/CD Phono/CD Phono/CD LA/LB Zone/Booth/Rec/MSTR
LO LO LO LO LO LO LO LO LO LO LOLOLO LO
RO RO RO RO RO RO RO RO RO RO RORORORO
********************************************************************************
1. Turntables - A) If being used make sure the little black switch on the back is set to Phono instead of CD. Plug just one table in, play the record & see if there's only one side of your MASTER output jumping and make note of it. Then repeat the exact same steps for all Phono inputs (total 3) & again make note of your MASTER output signal Left or Right or Both sides jumping. This will help you identify if its just a specific channell that only works on R or L.
B) Now do the exact steps above for the other turntable & this will confirm whether or not the Phono cables went bad on the turntable or if a specific channell is has gone bad while in Phono mode.
2. CDJ's/Rack Mount CD Player - A) Now just use your CDJ's/Rack Mount CD PLayer for the next test & be sure to now change the little black switch on the back from Phono to CD. Just as the steps with the turntable perform the same for this item in all possible RCA's (total 6) & note your MASTER channell output signals L & R.
B) Now do the same for the other CDJ/Rack Mount CD Player & this will confirm whether or not the RCA cables went bad on the CDJ's/Rack Mount Player or if a specific channell has gone bad while in CD mode.
3. Audio Cables OUT - A) There are a host of ways to have your audio come OUT & multiple configurations depending on how you record &/or bounce your audio OUT. Now since you say your MASTER OUT digital meter is only jumping on the R side depending on if you're going with RCA MASTER OUT or XLR BALANCED MASTER OUT either or is what'll show the digital reader bouncing with audio so check both. It could very well have been a cable going bad on you simple as that & you can check that by pluging your cable that works on the R side into the L side. If it starts showing a reading on the digital meter than you've solved the problem being a bad cable. Also don't forget to check your ZONE, BOOTH & RECORD OUTS as well however these will not show on your digital meter so open up your audio recording software to confirm that L & R sides are working for these.
B) Last but not least double check that your BALANCE knob is set directly at 12 o'clock, this could sometimes be the culpret.

Well I hope this helps & good luck.

WesTCo@sT
">

Sep 21, 2012 | Numark Industries Numark 5000FX 5 Channel...

1 Answer

How to connect UB1202 to an Amplifier


Hi ha07. Have you fixed your Problem? If not, If you are using a HiFi amp you can connect it to any AUX input or tape in.
But better to use Aux, so you can keep Tape-In free, but it all depends how you want to use your system for recording
From the Mains "OUT" of your Mixer, 1/4 inch to RCA lead/s or adaptors will be needed, (Depending on your AMP) into the aux input of your stereo. But their is many scenarios for inputs and outs.
then you can run a lead to your computer from your Mixer or amp from Tape out, but again lots of possibilities.
Hope this helps if you haven't fixed your problem
ed62d84c-af24-4d7b-92a8-035de0323ccc.jpg
Dont use (Phono input)
RustyRecords
Good luck and Vinyl Rocks RustyRecords Mail

Jun 29, 2012 | Behringer UB1202 Eurorack UB1202 Mixer (12...

1 Answer

I can`t get any sound from my pv8 mixer i put the speaker cable i have put the red & white phonos into the mixer from my laptop getting on sound from the clip at all please can you tell me where i am...


Several things to do: Plugging into the tape type inputs... say the 7/8 channel.

The little button below the set you plug into needs to be pushed to the down position. This selects the "B" set which are the RCA jacks.

Below the set you are plugged into. Turn up the top knob "Gain" until the "clip" LED just isn't quite flashing.

At the bottom of that same column Turn up the "level" as needed for the mix.

Then of course, advance the Master level as needed.

May 13, 2011 | Peavey Electronics Peavey Pv8 6-input...

1 Answer

We are trying to use the Karaoke Machine and the words don't display. And we don't see any audio input to connect the ipod.


You would connect the IPOD to the RCA jacks on the back, HOWEVER the audio through there cannot be used for Karaoke. Te only other possibility is to mix the stereo channels of the IPOD and run them into one of the MIC inputs.

To get words, you must buy special Karaoke CD's that have the music and the lyrics. Search for sellers of the disks using Google.

Dec 27, 2010 | GPX Karaoke Party Machine

1 Answer

I have the Eurolive B212A speaker,and the Xenyx 1202fx.I want to play my Ipod using this set up.Please help with connection


The Ipod is stereo and your speaker is not, so don't expect stereo.

Find a 1/8 inch stereo cable that splits the two channels into individual cables and enter those into two channels of the 1202 mixer. You might find a cable that goes from the 1/8 inch stereo and splits to two RCA type jacks which you have to either find RCA inpouts on your mixer or get two RCA to 1/4 inch adapters.

Crank the pan controls clear to the left on those two channels. Run a cable from the 1202 left main out to your speaker input.

Adjust the controls as needed.

Jan 03, 2010 | Behringer Music

2 Answers

How to connect my qqualizer to my djm pioneer 400 mixer


Use the stereo master outs from the DJM into the A and B Inputs of the EQ (you'll need 2 phono to Jack or 2 phono to XLR cables) then from the A and B Outputs of the EQ to the power amp/ speakers, etc (you'll need jack or XLR cables depending on what is powereing your speakers)

May 27, 2009 | Pioneer DJm 400 Professional DJ Mixer

Not finding what you are looking for?
AMP Speakers Pro Karaoke System Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top AMP Music Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

yadayada
yadayada

Level 3 Expert

76691 Answers

Brad Brown

Level 3 Expert

16043 Answers

Are you an AMP Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...