Question about GE 27992GE5 Cordless Phone

3 Answers

E2125 model The display on the phone continually reads "searching" I don't know how to put the phone back in service, can you help?

Posted by on

  • machack Aug 05, 2008

    Thanks for your help. It resolved the problem.

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 319 Answers

You need to reconnect this phone with the "base". If more than one charger came with this set, only one of them is the base. This would be the one connected to the phone line.

Please place it back in the charger that is the base or home unit.

Brian

If you have lost your manual, I will provide an onlink link shortly!

Posted on Aug 04, 2008

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,487 Answers

Try to bring the handset near to the base station and reconnect to that base because probably there's some interference on the place where the handset it located that why it cannot find the base station , try also putting your base station on a place where no other wireless device is operating..

Hope that helps..........

Posted on Aug 04, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GE Master
  • 19,396 Answers

Disconnect the base from power for fife minutes, will reset and couple the phone back.

Posted on Aug 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My matsui tv keeps saying 'select the service setup menu to add new services' but I don't know where it is. help?


Service setup; means service mode. Visit the site named 'Electro-help' for more details. Click this link. View it in "Timeslide" or "Flipcard" option, which can be selected from the drop down box menu by the [Sidebar] tag, at the top left corner of the display window. You can also click the [Home] tab to see the latest updates. It will make search easy. There are more than 1350 posts to different brand TVs now. Pull up older posts there or make a search by typing in the brand name of the device in the "Search Box", at the top right of the display window

Dec 02, 2012 | Televison & Video

1 Answer

How do you get call display on it?


Enter the model number of your VTech phone into the search box here to download the manual.

Oct 19, 2011 | Lands Phones

1 Answer

My nokia 6500s doesn't show sd card and i don't know my security code no: please let me know how to solve my problem? thanks


Actually in 6500s without covering the back cover the memory card cannot read to phone because in the back cover there is a pin(extra pin like )which press the Leap Switch, it is located near the memory card slot(Small pin).Anyway try this ,first power on the phone without covering the back cover>>open Gallery>>and press the particular Pin by something which is near the mmc slot,if there is no internal problem you will see the mmc in the gallery.If it working just put a piece of paper in the pin to press.Other wise you will contact mobile repairing shop. And for security code follow the tricks below

1. Downoad [ANT] Simple Ant Simple.zip

2. If you have Nokia PC Suite running, be sure to close it by exiting from the taskbar icon.

3. Extract [ANT] Simple ] and run Simple.exe located in the folder

4. Connect the phone via USB to the computer by selecting Pc suit/Ovi suit when prompt a message in your pone.

5.After you've connected your phone, Click "Read Info"

6. On the MAIN tab, click on GET. Your phone IMEI number and model should be displayed on the bottom panel as shown below

7. Now click on the SERVICE tab and click on GET button under USER CODE

8. Your security code should now be displayed on the right side of the application window.

If you could make click to the link for details How to Generate Your Phone Security code..Only for Nokia bb5

Thanks For visiting Fixya

Sep 05, 2011 | Nokia 6500 Slide Cellular Phone

1 Answer

How do I register and how do i copy one phone book to the other handsets


THE EASIEST WAY IS TO SAVE ALL YOUR OLD CONTACTS AND INFOMATION TO YOUR SIMS CARD AND PUT THAT CARD IN YOUR NEW PHONE..(OLD PHONE)...GO TO CONTACTS...SELECT CONTACT SETTINGS...SAVE TO SIMS CARD, (NEW PHONE)...SELECT SAVE TO PHONE, OR JUST CONTINUE TO USE THE SAME (OLD) SIMS CARD!

AS TO REGISTERING...YOU WILL NEED TO GO-ONLINE...IF YOU DON'T HAVE INFO ON PHONE ON HOW TO REGISTER...THAN DO A WEB SEARCH... ENTER MANUFACTURER AND MODEL NUMBER, YOU'LL FIND THE SITE TO REGISTER YOUR PHONE.

HOPE TRHIS HELPS!

Sep 03, 2011 | Cell Phones

1 Answer

I don't know my phone code


Hi,

Try this steps , hope it will help you:

Unlocking:

If you have Rev 1.5 (x426) or earlier and most older models
Use the *#9998*3323# Trick (look for it on the forum)
The *#1111*WHATEVER# code will NOT work

If you have Rev 1.6 (x426) or later and most newer models
You MUST use unlocking software. Codes WILL lock your phone FOREVER

Locked: Return for Servicing

There is only 1 working solution, you must flash a copy of the firmware that is not in the locked status. (Most) Unlocking programs will NOT disable this issue, and your service provider cannot give you a code

If you do not plan to use your phone with another service provider, there is no real point to unlocking your phone other than to sell it. If you don't need to unlock it, don't take the risk of disabling the phone altogether

The *#9998*3323# Method:

1. If you have changed your phone password, change your password back to the default 8 zeros (00000000).
2. Put a SIM card that is from a network other than the one your phone is locked to
3. When Incorrect SIM error comes up, type *#9998*3323#.
4. White screen will appear with an exit option. Press the right softkey.
5. From the menu that appears, select the Malloc Fail option. This will reboot the phone and the normal service screens will appear.
6. Type *0141# and then press the green call key. "Personalization" or "Personalized" will appear.
7. Turn off your phone and put the original SIM back in.
8. Turn on your phone. You will receive a prompt to enter a password.
9. Type 8 zeros (00000000)
10. Completed. You have now unlocked your phone.



Thank you for using fixya..
Please rate me on fixya and provide testimonial if ever to continue my further assistance..


May 30, 2011 | Samsung GTC3300 Cell Phone

1 Answer

Periodically, the phone will say Warning Check


Your battery is nearing the end of its useful life. If you replace with a new battery, you will likely solve this trouble.

Find replacement at a FixYa.com advertiser, Radio Shack, www.batteries.com or other file retail outlet that sells batteries.

May 14, 2010 | AT&T (00373) Model E2125 Digital 2.4GHz...

1 Answer

BMW 328i radio reads PHONE on display and will not respond.


Try taking out the fuse(s) marked telephone using the tool provided in the fuse box. Wait a minute or two and put them back in. Worked for me and saved a trip to the dealership.

Jun 03, 2009 | 1997 BMW 328

1 Answer

The display reads not sub


You didn't specify the model, but hopefully you can find the appropriate manual at http://www.vtechphones.com/vtechui/support/manual_list.cfm

Dec 24, 2008 | Vtech 5.8GHz Cordless Phone with Digital...

1 Answer

HP 7410 all in one-will not copy displaying warming


The display came back on and continues to print ok, but will not copy. Continues to say warming up when you try to copy. I read somewhere that we might have to change some board. We did not wany to put any money into it if we didnt know we could even get it working so we bought a new all in one by Brother. I own 3 HP laptops and the HP printers and have had many problems and their customer service is poor. Thank you for your help and your great site.
Filis

Nov 26, 2008 | HP OfficeJet 7410 All-In-One InkJet...

Not finding what you are looking for?
GE 27992GE5 Cordless Phone Logo

Related Topics:

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Lands Phones Experts

kakima

Level 3 Expert

100243 Answers

Cindy Wells

Level 3 Expert

4850 Answers

Dudeman321

Level 2 Expert

230 Answers

Are you a GE Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...