Question about Whirlpool LHW0050PQ Front Load Washer

3 Answers

Washer will get as far as spin cycle and never complete

The washer has been working fine, now it gets as far as spin and never spins (with a load) or completes. I emptied the washer and it does spin up very fast, but still never reaches a Done state or Done cycle.

I also checked and cleaned out (not dirty) the lint filter. I also pulled the pump hoses to check for blockage and it is clean.

Posted by on

  • waudlob Aug 05, 2008

    How do you reset the wash cycle? is there a reset button?



    ALso, i have tried other wash cycles, and spin options, with the same result.

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 97 Answers

Hiya

i would suggest checking the carbon brushes in the motor. if these are worn down then it wont go into fast spin under load but will with no load.

REMEMBER UNPLUG BEFORE CARRYING OUT ANY WORK

hope this helps


please dont forget to rate the helpfulness of this reply thanks kj

Posted on Aug 05, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Whirlpool Master
  • 19,396 Answers

It is the washer belt out of place, you need to take apart the appliance back panel and re route the belt, or call a technician to do the job.

Posted on Aug 05, 2008

  • Ginko
    Ginko Aug 05, 2008

    resetting the wash cycle has nothing to do with this, in any case ask mattozan, he is very interested in scoring this solution, it is time he does some more job than just posting placeholders to get the money.
    I will be grateful if you keep helping this customer dear matozzan, find a routing scheme for the belt and possibly service repair number . Thanks.


×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 555 Answers

Try resetting the wash cycle

Posted on Aug 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does a Kenmore washer not finish the cycle?


Washer Repair - Not Advancing -Repair & Diagnostic ...

? 8:30
https://www.youtube.com/watch?v=IEr9A7uhdN8
Sep 6, 2013 - Uploaded by ApplianceVideo.com
Repair your Kenmore Top Load Washer suffering from these following issues: Will Not Advance Past Rinse ...

Kenmore washer doesn't complete final spin cycle - ApplianceBlog

www.applianceblog.com/.../31894-Kenmore-washer-doesn-t-complete-fi...
May 16, 2012 - 9 posts - ‎2 authors hello, my kenmore washer doesn't complete the final spin cycle. i ... Does it stop in the middle of the final spin cycle or does it not go into the ... FIXED Kenmore Washer - Not finishing the spin cycle
9 posts
Dec 20, 2014
FIXED Washing Machine Does Not Complete Cycle ...
10 posts
Mar 14, 2013
FIXED Kenmore washer won't spin out all water from ...
10 posts
Jun 27, 2009
FIXED GE front load washer WCVH6260F0WW stops ...
10 posts
Jul 2, 2007
More results from www.applianceblog.com

Nov 05, 2015 | Kenmore Washing Machines

1 Answer

Spin cycle


sounds like a faulty timer unit.

Aug 26, 2013 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Won't drain and spin. Cycle completes and all the lights on far right flash. Door won't open. Bottom of washer is filled with water. Tried putting it on drain and spin cycle. Still won't drain. Beeps...


Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} Hi,

Problems with a washing machine not spinning or not draining are often inter related..

If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing machine not draining and or not spinning


heatman101

Sep 08, 2010 | Frigidaire Washing Machines

3 Answers

The washer is not spinning well...Clothes are partly wet when cycle is completely off...it used also to leak at one time where we can see some water when the cycle is complete...


Hello, when the clothes are partly wet when cycle is complete then check these.
1. Motor coupler
2. Spin cycle

MOTOR COUPLER; To test the motor coupler, restart the washer in it's spin cycle,let the machine runs for a minutes and then open the lid and notice if the tub is spinning: if it's spinning when you lift the lid that means the coupler is fine and if it doesn't spin that means you have to replace it.
SPIN CYCLE: If the washer doesn't reach it's proper spin speed,the cloth may be wet at the end of the cycle,check to be if the load is properly balanced and run a spin cycle again,if the clothes are still wet, you may have a worn or loose belt which you have to replace.
Thanks

Jun 10, 2010 | Maytag LAT3600A Top Load Washer

1 Answer

I hae a Whirlpool LSR8233EQ1 Top loading washer.


If you can catch it running while in the spin cycle but not spinning ( put a butter knife or screwdriver in the lid switch hole ) and wiggle the timer knob . If it starts spinning during this process , the timer needs replaced . Sometimes though , when a washer does everything BUT spin and you hear the motor running , the transmission is the problem .

Aug 16, 2009 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Hoover 600MB Top Loader, Won't Spin


I have the same problem. Just started missing the spin cycles and now I need to find which part to replace.
So far I think it could be: Aged contacts in the Timer, a faulty spin/no spin switch, or something to do with the brake/release mechanisms etc. ..I do know that the problem is electrical because everytime the motor starts the spin works fine; therefore eliminating in my opinion, the mechanical gearbox bits as a cause.

Jun 22, 2009 | Hoover HTC243 Top Load Washer

1 Answer

Excessive wobble


If there's a loud thumping noise during the spin cycle, the load of clothes has probably gotten unbalanced. Open the lid, redistribute the clothes in the washer, then re-start it. Repeat these steps if necessary.

Sep 06, 2008 | Maytag Neptune Washer

1 Answer

Washer fills/agitates and stops prior to draining


If pump works fine or still pumps out water, then it is a timer malfunction. Replace the timer and you should be fine. To locate a part number for your timer, refer to www3.sears.com with the model number off your washer.

Mar 14, 2008 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Whirlpool LHW0050PQ Front Load Washer Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...