Question about Hotpoint Washing Machines

1 Answer

There is a series of lights flashing on my Hotpoint BWD129 washer/drier. The lights flashing are the 'door locked' light as well as the 'super wash' and '1200/600' lights. This coincides with the machine not spinning nor pumping out water.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

Hi there,
i had similar problem . there is a blockage in the fllter , probably a small sock. the filter is at bottom right hand at front of machine .
turn anticlockwise to open.

regards
big eck

Posted on Jan 31, 2009

  • paula_lyons
    paula_lyons Feb 04, 2014

    i will have a look thank you

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Door locked no light to say locked no washing action on hotpoint wf430


Brusheson motor will be worn. The door lock is in series with the motor so if brushes worn it interrupts the signal telling the board the door is locked. New brushes will likely be all it needs.

Oct 30, 2013 | Hotpoint WF430 Front Load Washer

1 Answer

Hotpoint BWD129 1200 spin - unwanted drying cycles


This is more a workaround than a solution. When you choose the washing programme (say "D") and push the on/off button, two lights will flash, the "door locked" and the "drying" one. Now turn the "drying programme" button until the "drying" light stops flashing (in my case, this is true when I set the drying programme to 40°C). Then start the washing mashine.

Seems like the function of the drying programme button has shifted against the settings written on the button...don't ask me why! Of course, no guarantee but works for me. Please let me know if it does for you.

Oct 13, 2008 | QuietLine WD-9900 Front Load Washer /...

1 Answer

Hotpoint Aquarius


I have a hotpoint aquarius washer/drier. I don't know if this will solve your problem but I know with mine, this almost always happens, the only way I can get it to start is by firmly pushing the door a few times around where the lock is, once I hear a little click inside it will start ok. I presume its because it wont start as it isn't registering that the door is closed, the only time it does not do this is if I literally slam the door really hard. Hope this helps you!

Sep 13, 2008 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

Door Lock Light - flashing


does the door still lock? becasue it sounds like a faulty lock. It may need to be replaced.

Aug 25, 2008 | Hotpoint WMA46 Front Load Washer

1 Answer

Lights flashing & door wont open


Dear RedBikeGirl

I've got a BWM129 which is causing me problems too (the washing is smelly at th eend of the cycle!) - How did you get the filter unit out of its housing, I turns around but doesn't seem to want to come out!

Any help gratefully received

Jun 01, 2008 | Hotpoint BWM12 Front Load Washer

2 Answers

I have a BWD 129 Hotpoint intagrated washer dryer and lights 1 2 and 4 are flashing what does this mean and do I need a new machine it will not do a drying cycle?


Filter blocked, disconnect hose from under sink connection and drain into bucket. Hotpoint does not want you to change filter, contact Service Engineer.

Apr 03, 2008 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

1,426 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

puggy666

Level 1 Expert

47 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...