Question about Intel NetportExpress Print Server NetportExpress 10 or 10/100 or Pro Manual Only p/n 730455 001 (730455001) Print Server

1 Answer

Intel Mother board

I just purchased an intel motherboard model #: D845GCL. I went to the intel support site and this mb is not listed. I found out that this motherboard was sold as part of an actual computer system. I want to get the manual so that I can hook it up correctly because the markings on the board are not legible. Does any one know where I can get the manual for something like this? Your help will be greatly appreciated.

Frank

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have obtained the information you require and will forward to you if you can give me your address
Terry

Posted on Nov 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can my wre54g range expander work with a wireless N router


"Using a Range Expander is not recommended if you have a Linksys Wireless-N Router." This info was found at the bottom of this link under the note.
http://homekb.cisco.com/Cisco2/ukp.aspx?vw=1&docid=afe65b013aea4e1a92424e635a6aa619_17831.xml&pid=102&slnid=3
I found a list of router that it should work with. All the routers listed are G routers though.
http://homekb.cisco.com/Cisco2/ukp.aspx?vw=1&docid=11a933a7173b4f31b43f21dde626becb_1486.xml&pid=102&slnid=3
You should check to see if you router model # is in this list.
Cisco owns Linksys FYI.
Hope this helps you. Even though it says that it is not recommended to use it if you can still try it to see if it works. You can always go back to the way things were.

Aug 27, 2012 | Linksys Wre54g wls g range expander...

1 Answer

How can i setup my printer(hp laser cp2025 witrj d-link 1020


I went ahead and found the information you need on the HP tech support site please use the following link:

http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=ca&prodTypeId=18972&prodSeriesId=3673580&lang=en&cc=ca

Jul 06, 2011 | D-Link RangeBooster G DPR-1260 (DPR1260)...

1 Answer

D Link DP301U not working with a Canon MXF series printer


dont' worry about what the d-link site says. its because they haven't tested it. i got my dp-301u to work fine with my hp1020 on 2 different workstations with the following steps.

1. install printer locally via usb and test.
2. create a second printer as per the dlink manual creating a port. don't worry about the name as we will delete it.
3. once created go into the properties of the 2nd printer and change the port to something local - anything will do to free up the port.
4. go into the properties of the printer that was created in step 1. and change the port to that of the print server.
5. test print. should work fine.

cheers!!

Jun 23, 2009 | D-Link DP-301U (790069251979) Print Server

1 Answer

No internet connection


if you have access to another printer with an internet connection, go to this site:
http://support.dell.com/support/downloads/index.aspx?c=us&l=en&s=gen

Enter the service tag for the system and then download the broadcom network driver to a USB Drive or CD and then take it to the Dimension 4550 and reinstall the driver.

Feb 09, 2008 | Print Servers

1 Answer

Copystar Royal - NC4A NETWORK BOARD 10BASE T/2 Print Server?


Here you go the official service site for copystar and kypocera, contact them and they will help you, if not , look for any copystar dealer can help you.
www.kmaconnect.com

let me know wat happen, if you didnot find any solution let me know where is ur location so i can hook you to some dealer.
Regards

Jan 19, 2008 | Copystar Royal - NC4A NETWORK BOARD 10BASE...

1 Answer

Print server won't work with 2 printers of same model??????


Hi Pirate!
Can your remotely acces the two printer servers? If they are located by name, on the network, make sure it is not the same on both, like a default name. If it is possible, connect to one, disconnecting the second one, and see if it has a fixed IP, Like 192.168.x.xxx. Change it off the default, or use use the DHCP option, if it is has it.
I was working with some Intel print servers, long ago, that used software on each PC to locate the printer servers. Since the both had the same name, and they conflicted.

Good Luck.

Jan 08, 2008 | NetGear PS121 Print Server

2 Answers

Printer/ 3500 - 4500 instruction manual & cd


my prob is that it only prints one page of my document

Jan 01, 2008 | Intel NetportExpress PRO/100 Print Server

Not finding what you are looking for?
Print Servers Logo

Related Topics:

298 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Print Servers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

old marine
old marine

Level 3 Expert

1464 Answers

Cindy Wells

Level 3 Expert

4757 Answers

Are you an Intel Print Server Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...