Question about Aurora Global AS702MX Shredder

2 Answers

Will not shred will go in Rev

The shredder with not shred what to do

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

I just fixed a similar issue. My AS702MX shredder fell off my desk while I was emptying the basket. When I tried to use it after that it only ran in reverse, not in auto/forward (it was not jammed). This meant that the motor was still working. Since this shredder is so old, no longer under warranty, and not working anyway, I decided to open it up. I unscrewed the 5 screws on the bottom (that's all), then the plastic covering opened up. While looking at the shredder from the top (without the plastic cover) you will see a small black plastic trigger mechanism in the middle (this is what the paper hits to start the shred) this piece will push a copper filament onto the motor to complete the "auto" circuit. Well the fall had caused the plastic trigger to dislodge on one side... I popped it back into place and closed it up, and its working fine now. It was really simple to fix.

Posted on May 31, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Okay, cleaning out the paper jam under the plastic cover freed up the switching mechanism and voila....it works.

Posted on Nov 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turns on, << works,won't shred when paper is inserted. doesn't seem to be jammed


Is it running in reverse? A lot of shredders have a switch for fwd/rev. Otherwise maybe the gears are stripped (plastic).

Dec 29, 2015 | Office Shredders

1 Answer

How do i increase the number of pages that the shredder will shred at one time?


you can only shred what it will take , trying to force more in will only break it faster .

Oct 16, 2015 | Shredder Office Shredders

1 Answer

Paper shredder doesn't move due to too much adhesive paper - how to fix it


Before trying anything I suggest, make sure your shredder isn't plugged in.
You will need to remove the adhesive from the rollers. You will need to use a glue solvent on the shredder rollers,something like Goo Be Gone. Personally, I still use Ronsonol Lighter Fluid In the image below I've outlined the supplies you'll need to, hopefully, clear your jam.



25346531-f3timxio4jyou4u0bydnlgfi-2-0.jpg Without disassembling your shredder, the best way to clear your jam is to use Rosonol Lighter Fluid (3), tweezers (4), and dental picks (5).
  1. Make sure you are working in a well ventilated area. Separate the shredder from its shredded paper collection tub.
  2. Turn the shredder head upside down so that the paper output is facing up.
  3. Pour Rosonol lighter fluid on both sides of the rollers near where they come together.
  4. Use dental picks and tweezers to dislodge stuck paper pieces
  5. Turn Shredder head over and repeat steps 3 and 4
  6. Move power switch to the "Off" position
  7. Plug power cable back in
  8. Move power switch to "Rev" (reverse) position, if still stuck move power switch to the "Fwd" position, repeat twice
  9. Repeat steps 1 - 8 until the rollers move freely
Once the rollers are moving smoothly you need to oil the rollers.


25346531-f3timxio4jyou4u0bydnlgfi-3-0.jpg

Dec 30, 2014 | Shredder Office Shredders

1 Answer

Ativa X1000 paper shredder that doesn't turn on


took the shredder section apart, cleaned out the gears of paper and a broken mount (plastic piece), and hand turned the electric motor to free it up. After assembly, the ready light works and so does the FWD/REV directions for shredding.

Nov 10, 2009 | Office Depot Ativa DQ60M Shredder

1 Answer

Royal VF12mx shredder


Pour some shredder oil in the throat where you normally insert the paper...put some shredder oil directly onto 1 sheet of paper and try shredding 1 sheet. If it wont even shred 1 sheet I would ask is the shredder running???

Mar 05, 2009 | Royal VF1012mx Shredder

1 Answer

Paper shredder not working


sounds like the cutting wheels have something jammed inside them , can you take it bak and return it ? or open it up and see if anything looks bad inside ?

Jan 07, 2009 | World Office Products Papermate PM-600C...

1 Answer

My shredder stop shredding. has paper caught in it


Shredder drive gear is probably shredded - hard part to find or replace usually. Could mean a new shredder;-(

Aug 29, 2007 | Quartet gbc 6120S Shredder

Not finding what you are looking for?
Aurora Global AS702MX Shredder Logo

641 people viewed this question

Ask a Question

Usually answered in minutes!

Top Aurora Global Office Shredders Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

quennie732

Level 2 Expert

393 Answers

Jim Keysor

Level 2 Expert

307 Answers

Are you an Aurora Global Office Shredder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...