Question about Office Equipment & Supplies

1 Answer

I have a Canon PIXMA MP 620 -I replaced the whole set of ink, then I turn it on it says "6A80 printer error" I turn on & off but problem still persist. I hope you can help .

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 192 Answers

If the device is not functioning properly or to clear memory, reset it.

  1. On the operator panel, press the button. (The display will go blank.)

    Note: It may be necessary to unplug the power cord if pressing the ON button does not shut off the printer.

  2. Wait approximately ten seconds and then press the button again.

  3. Wait until the device has completed its cycling process before submitting another job request.

    Note: It may be necessary to unplug the power cord and retry if the above steps do not clear the error.

Posted on Mar 28, 2011

  • Whispis2
    Whispis2 Mar 28, 2011

    Also check to make sure the print heads and ink tanks are properly seated.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon MX870 error 6A80


Hello friend,
APP position error or Error Code 6A80
Condition: An error occurred in the APP motor.
Problems and Solutions:
  • Check for foreign material or paper debris around the purge drive system unit
    - remove foreign material.
  • Check for foreign material or paper debris around the ASF unit
    - remove foreign material.
  • If other solution fail, replace one off the following part
    - Purge drive system unit
    - Logic board
From http://pcmediks.blogspot.co.uk/2010/11/canon-pixma-error-codes-and-solution.html

Aug 25, 2014 | Canon PIXMA MX870 Wireless Office...

1 Answer

Mp 630 eror 6A80


Solution video Error 6A80

www.youtube.com/watch?v=F3S5Dcp6s8Yv

Jan 15, 2013 | Canon PIXMA iP4000 InkJet Photo Printer

3 Answers

Error 5B00


Canon PIXMA MP180 All-In-One InkJet Printer
Error 5B00

Jul 04, 2012 | Canon PIXMA MP180 All-In-One InkJet...

1 Answer

Service error 6c10


Fixing "Error code 6c10? in your Canon MP 620 printer is easy. For this you need to turn your printer off. After this you can press and hold the 'Resume' Button. While pressing the 'Resume' button, you can turn off your Canon MP 620 printer. The green led of your printer should go on as you are holding the Power button; release the Resume Button. Now after that you need to click on the 'Resume' button twice and release both buttons without releasing the Power Button. Now you click 'Resume' four times then click 'Power' button to confirm the selected action. Finally you must turn your printer back on.

May 30, 2011 | Canon PIXMA iP4600 Color InkJet Photo...

2 Answers

I am getting error code B200 on my Canon Pixma MP 620 printer


B200 IS BAD PRINTHEAD. i TRIED TO CLEAN CLOGS BUT IN THE END THE FIX WILL BE TO (REPLACE PRINTHEAD) IF UNCLOGGING PRINTHEAD OF DRY INK DOES NOT WORK. YOU CAN UNCLOG BY USING A PRINTHEAD CLEAMING KIT, BUT IF THIS DOES NOT WORK REPLACE HEAD. EBAY WAS CHEAP FOR ME 25 BUCKS PRINTER IS WORKING AGAIN.

Aug 10, 2010 | Canon PIXMA MP620 All-In-One InkJet...

2 Answers

E5 flashing - do not want to use colour ink


use any color cartridge that is no sort & see canon error e5 solution

Jul 21, 2010 | Canon MP140 PHOTO AIO All-In-One InkJet...

10 Answers

I have a Canon PIXMA MX860 and have error 6a80. i have shut off and on twice no paper jam. totally stuck


6A80 is a purge unit error, the purge unit is the cleaning assembly on the right where the printhead parks when shut down. If you can move the carriage out of the corner, use a flashlight and see if there are paper scraps or the like keeping the purge assembly from moving freely.

Oct 13, 2009 | Canon PIXMA MX700 All-In-One InkJet...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8016 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

78238 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...