Question about Canon PIXMA MP210 Photo All-In-One Printer

2 Answers

My cannon mp210 is flashing E 1 6 what does that mean and how can i resolve it

Posted by Anonymous on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

E16 means that the Ink Level is unknown, if you refilled it somewhere it would cause this error to come up. The only way to make this go away is to disable the Ink Level Detection by holding Stop/Reset for button for about 9 seconds. It should now work properly but it will be unable to tell you the remaining ink level. The only way to get it to tell you this information would be to replace the ink cartridges.

Posted on Mar 28, 2011

  • unkle_cyril May 16, 2011

    Thank you, pressing the reset button for 10 seconds worked for me

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 310 Answers

You need to replace the cartridge with a new one original canon,not refill or compatible.If i have been useful please give me a vote :).Thanks

Posted on Mar 28, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a canon mp210 that is flashing E 1 then 6. what does that mean ?


Error E1,6 means Ink has run out.

http://wwwflashing E 1 then 6.indiepowerpop.com/Canon MP210 Manuals/mp210_qsg_en-us_v1.pdf

navigate to this link, this the user manual of PIXMA MP210, where you can see meaning of errors and how to troubleshoot them.
thanks,

Nov 23, 2010 | Canon PIXMA MP210 Photo All-In-One Printer

2 Answers

How do i print in colour with my canon mp210?


Hiya,

I have found the user guide that will helpyou with this particular problem, and any other issue relating to this piece of hardware. The download link for the manual is listed below. Copy the link into your browser address bar and you are all ready to read up on your cannon pixma mp210.

I hope this is the fixya for you.

Any problem? give me thhe details and I will resolve it ASAP for you.

Yours sincerely

Oz


Feb 25, 2010 | Canon PIXMA MP210 InkJet Printer

1 Answer

My Cannon Printer mp210 is flashing a 3-E. The light by alarm is on and it will not print or copy.


3 - E mean paper jamed. watch out inside properly some time paper cut stuck inside and its showing.

Jan 29, 2010 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

Error e then 7 flashes in window


I dont know why Cannon persist wuth there stupid messages by morse code,
E 7 means that a sensor has detected an incorrect ink cartridge
Options to fix
1.Check the ink cartridges are correctly installed
2. If you have recently replaced an ink cartridge with one from a supplier other than Cannon feplace the cartridge with a Cannon branded prosduct
3. If everything looks ok then try powering down the printer, unplug wait 2 minutes for all residual power to drain, then power up to see if the printer has resolved the problem, this just resets the sensor which reports the error but it often works as the sensors are the most likely part to give intermitten faults

Sep 25, 2009 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

Is a Cannon mp210 compatible with macs?


Mac OS X is supported for the MP210 but Mac OS is no...

I don't use the Mac myself but certainly that's the information provided on the Canon.co.uk website here:
http://software.canon-europe.com/products/0010485.asp

Mar 03, 2009 | Canon PIXMA MP210 Photo All-In-One Printer

Not finding what you are looking for?
Canon PIXMA MP210 Photo All-In-One Printer Logo

1,646 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1972 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...