Question about Philips SE4502B/17 1-Line Cordless Phone

1 Answer

I have philips se4502b/17 cordless phone but it remains on searching mode i tried my best to register it but not succeeded

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Sorry this comes late, but we just went through this problem with our unit, but I hope this helps someone else out there.

We had the same problem. To fix this, you need to do a few things and hopefully it will work for you.

First, do you have the PIN that came standard on the phone? The standard PIN for these phones is 1234. Go to the advanced settings, and then REGISTER, and put the PIN in and allow it to go through the "registering..." mode. It even may beep and say "unregistered" but don't give up hope, If this happens, unplug the unit from your outlet and wait a few minutes, plug back in, and place the handset on the base. It should then work.

Posted on Jun 23, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Philips cordless phone se 455


CANON IR2520 ERROR E000000

Nov 11, 2013 | Lands Phones

1 Answer

Register handset


drop each phone one at a time into the base... not the charger.. the main base... you will notice the charging light flicker... move on to the next phone... they should all be registered when you are done

Robert

Please take a moment to rate this solution thanks

Feb 05, 2009 | Philips CD1553B/17 Trio Cordless Phone

2 Answers

Base station and units all say 'searching'


You may need to register your handset to the base.
Normally ,there is a advanced setting ,register handset. At the same time, press and hold "page" key on your base 4 to 5 second , there is be a registation success tone from handset. You can register all of your handset ,one by one. Some model need to input register code, normally ,it is 1234 , or 0000.

Dec 22, 2008 | Philips DECT 2252S Cordless Phone

1 Answer

Philips dect 122


Normally , one base can register 4 hanset in EEPROM setting. The model, Maybe you can try press the "page" key, then plug the power cord , after 5 to 6 second , release "page" key. Try to register handset again.

Dec 13, 2008 | Philips DECT 2252S Cordless Phone

2 Answers

Philips CD245 Cordless Twin


just one phone displaying unregistered

Sep 28, 2008 | Philips DECT 2252S Cordless Phone

1 Answer

Philips dect245 searching problem


1. try to reset handset. try sw reset in the manual .
2. try to clear the base. unplug power cord, press and hold "page " key , and plug the power cord , after 5 to 6 second release page key.
3. Register again.
4. If there is still searching , open the base and handset, to check ,if the antenna is broken or not.

Jul 30, 2008 | Philips DECT 2252S Cordless Phone

2 Answers

Cordless Phone problem- uanble to use!


Solution:

Unplug base unit
Remove both batteries from the phone(s)
wait 60 seconds
Plug in base unit
Replace batteries in phone(s)
Press speaker icon on base usnit for 5 seconds
Press menu
Select adv adv settings
Select registration
Enter 0000 then press ok
should go from waiting, to searching, then to 'welcome'
press ok...
should be up an running!! :-)

Feb 21, 2008 | Philips CD1503B/17 Phone

6 Answers

Philips CD130 Cordless Phone User Manual


registering again didn't work for me. I used the following steps
1. close the handset (long-press red button)
2. discconect the base unit from the power source
3. reconnect to the power source and long press the intercom (the only button on the base unit) for 5 seconds.
4. turn on the handset (long-press red button)
with 2 seconds and it will be connected again.

hope this helps.

Jan 25, 2008 | Lands Phones

Not finding what you are looking for?
Philips SE4502B/17 1-Line Cordless Phone Logo

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Lands Phones Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

kakima

Level 3 Expert

102366 Answers

Cindy Wells

Level 3 Expert

5102 Answers

Are you a Philips Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...