Question about Vacuums

1 Answer

How will i install a new lightbulb in my house? better if you will send me a diagram. thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

First off all make sure the light swicth is off if there is a light shade around it take is off then hold the light the white light fitting and get hold off the bulb then push up gently and turn the bulb antiy clockwise and it will pop out to replace new bulb off same watts do the same as taking it out but in reverse then put shade back on then try the swicth to see if it turns on if not the bulb is no good try a new on but be gentle with them they brake easy ok hope this helps you

Posted on Mar 28, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to get to the rainbow SE vacuum off/on switch.


Hi, here is a walkthrough on how to get to that part here. Steps 1 - 14 on how to access it, you will need to take apart the housing to get at it. If you need a new switch you can find that here. Rainbow did redesign this switch, so you will need to look at the wiring diagram if you are installing a new switch.

GoodVac.com Technician
www.goodvac.com
1-800-775-6586

May 18, 2014 | Rainbow Vacuum Cleaner Power Switch D3,...

1 Answer

Oreck xl 21 fan housing has new design. willit stillfit my older vac


It should. You can call Oreck and talk with them and give them the serial number off your vacuum and they can look it up and tell you for sure if it will fit or not.

Feb 18, 2013 | Oreck Great XL21 XL 21 8 Pound Upright...

1 Answer

Royal Power Tank - Pistol Grip


see this basic diagrams:


6_21_2012_11_19_52_am.jpg6_21_2012_11_20_19_am.jpg

Jun 20, 2012 | Royal Vacuums

1 Answer

Hoover bagless cannister 3765 - belt on power head slips off spindle. bought new belts - same problem. is this a design problem or can it be fixed? I don't want to take it to a repair shop 100 miles...


I would not recommend a smaller belt. You will only wear the motor. This model series power nozzle needs to have a metal clip installed near the belt on the brush roller housing. I know that most of them left the factory without it. Remove the cover to see if one is ther. if not have your dealer send you a clip or a housing with one on it.

Apr 03, 2010 | Hoover S3765-040 WindTunnel Bagless...

1 Answer

On/off switch for Oreck XL2600HH


Would have to assume by now you figured this out. However, need to open up the handle. It is a clamshell arrangement. Remove switch from handle, pull one wire at a time from the switch. The electrical connectors are a push-on type. Replace each one, one at a time, to the new switch, and then re-insert switch into handle. Close up the clamshell, tightening all of the screws, but do not strip the plastic housing.

Jun 19, 2009 | Oreck XL2600 Vacuum

1 Answer

How do I remove the housing cover on a westinghouse vacuum?


Remove clear snap-in lights lens. Remove both lightbulbs. Where the bulb sockets are there is a screw, remove them. Then simply pull up on the housing from the rear where the wheels are and remove the top cover.

Dec 28, 2008 | Westinghouse WST1500 Wired Special Edition...

1 Answer

Wiring schematic oreck xl2600hh


I have a Oreck XL and the propeller that is in the housing will become hard for the moter to turn. I have took it apart and do not see a problem, but when I reinstall the parts it will run for about 15 sec. and the moter will stop turning. When the propeller housing is off the motor turns ok and doesn't stop. Do I need a new propeller/housing?

Nov 06, 2008 | Oreck XL Ultra Bagged Upright Vacuum

1 Answer

Oreck XL Vacuum


If you can find a Kirby G series vacuum lightbulb, it will work in the Oreck too!! Many sellers carry them online.

Apr 21, 2008 | Vacuums

1 Answer

I CAN'T SEEM TO INSTALL A NEW UB8 BELT


  1. Remove the lower plate
  2. Carefully lift up on the agitator assembly until it clears both sides of the nozzle housing.
    repagita.png
  3. Remove the belt from the motor shaft by sliding it off between the end of the shaft and the nozzle housing.
3.4.2 Installation
  1. Place the belt around the motor shaft.
  2. Start the new agitator assembly back into the nozzle housing by placing the side opposite the belt partially into the slot. This will hold the agitator in place and leave both hands free to place enough tension on the belt to allow that side of the agitator to return to the nozzle housing slot.
    repagitb.png
  3. Place the belt around the agitator pulley on the agitator assembly.
    NOTE: There is a place for the belt to fit on one end of the agitator assembly only. This is the agitator pulley.
  4. Use both hands to pull the belt tight, and slide the agitator assembly firmly into the slots on each end of the nozzle housing.
    repagitc.png
  5. Rotate the agitator assembly by hand to insure nothing rubs and to check for correct assembly.
  6. Replace the lower plate

Jan 10, 2008 | Panasonic MC-V5745 Bagged Upright Vacuum

Not finding what you are looking for?
Vacuums Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

D. Floyd Kolb
D. Floyd Kolb

Level 3 Expert

43501 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...