Question about HP PSC 2175 All-In-One InkJet Printer

2 Answers

Printer keeps showing : Press enter to align cartridges. After doing this it then prints out an alignment page and shows: Alignment failed please: Press enter Alignment failed. This goes on and on. I have opened the printer taken out the cartridges, put them back in again gone through the same procedures but I keep getting the same information on the printer screen. Press enter to align cartridges.

Posted by on

  • 1 more comment 
  • Maggie Villegas Aug 22, 2008

    I put a brand new (not refilled) ink cartridge and printer will not align. I keep taking the cartridge out, put it back in, but still get the same message. Tried turning printer off, still doesn't work.




  • Anonymous Oct 05, 2008

    The problem has gone from notice to align cartridge to also include "Paper too small". This I thought had to do with european A4 paper versus American lettersize. I checked the settings and made sure it was set for A4. The problems remain. The printer now essentially cannot be used.


  • Anonymous Oct 22, 2008

    exact same

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

PRESS SET UP & OPTIONS AT THE SAME TIME. WILL CLEAR MESSAGE.

Posted on Oct 22, 2008

  • pjwisem Oct 22, 2008

    PRESS SET UP AND OPTIONS AT THE SAME SAME TIME AND IT WILL CLEAR THE MESSAGE.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Put in a new cartridge, now printer keeps telling me to press enter align cartridge-over and over again. Can press enter then cancel then black (copy) an copy this way. Never had the problem till I replaced old cartridge! Thanks

Posted on Oct 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset my hp officejet 6110 all-in-one printer? It keeps asking me to align cartridges.


Press menu and then press the Right Arrow key until you get to maintenance screen then press enter.
Option 2 is you align print cartridges.
Automatic cartridge alignment
Perform the following steps to align the ink cartridges:

1. Disconnect the power cord from the unit, wait five seconds, and then plug it back in. This will reinitialize the unit.
2. Print another alignment test page. If the Press Enter to align message is not currently on the front panel display, complete the following steps to print an alignment page:
1. Press Setup or Menu on the front panel (depending on the model).
2. Press the right arrow button (>) until Maintenance or Tools is displayed, and then press Enter or OK (depending on the model).
3. Press the right arrow button (>) until Align Print Cartridges is displayed, and then press Enter or OK (depending on the model).
3. To determine if the automatic alignment is functioning correctly, look into the output tray as the alignment page is printing; a blue light should be visible periodically on the page as the cartridges move back and forth. If this light is not visible, the product will not be able to align the cartridges and will require service. Service the product.
4. If the blue light is visible and the alignment pages are printing correctly, but the alignment pages still fails, there still may be a hardware problem with the unit.
If there are no other printing problems and you wish to continue, use the information in the Bypassing the ink cartridge alignment section below to bypass the alignment. The information from last successful alignment will be used.
If the message keeps reappearing or other print quality problems occur, service the product.

Mar 30, 2011 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

Print function


Hi,

The printer prints alignment page; after enter button.
Place the printed page in scanned glass properly.
Press the scan button and wait untill the ON light stops blinking.
Now alignment is completed.

Regards,
Riztech

Mar 02, 2010 | HP PSC 950 All-In-One InkJet Printer

1 Answer

Printer displays "align cartridges" but every time I try to align the cartridges, it starts printing and then says printing cancelled and it stops aligning/printing. how do I fix this?


There are several reasons why the HP All-in-One may fail to align the cartridges. The most common reason is an ink cartridge that has one of the following problems:
One of the ink cartridges is low or out of ink. Black and all three colors must be available.
The paper has already been printed on or is colored paper.
Protective tape on a new ink cartridge has not been removed.
Contacts on the ink cartridge are not meeting the contacts in the carriage correctly.
Cartridge is remanufactured or refilled. Refilled or remanufactured ink cartridges may have been damaged during the refilling process or have clogged ink nozzles.
The ink cartridge is defective.
Follow the steps below to resolve the problem:
Step one: Examine the paper the alignment page was printed on
The alignment page must be printed on clean plain paper of either letter or A4-size and that has a brightness level (as printed on the paper package) of at least 85. Colored papers or paper that already has printing on it will cause the alignment to fail.
Step two: Does the alignment page print correctly
On the HP PSC 900 series, if the page ejects immediately or a "Paper mismatch" or "Paper too narrow" message appears, the 4 x 6 paper tray selector located on the paper output tray is pushed forward. Move the selector all the way back toward the front on the HP All-in-One.
Look at the alignment pages that have printed. Compare the alignment page to those included in the " images of alignment pages " section at the bottom of this document.
If any of the colors or the black is missing, faded, or streaked on the alignment page, there is a ink cartridge problem. Click here (buu02176) (in English) to learn how to correct ink cartridge related problems.
Step three: Perform a ink cartridge cleaning procedure
The ink cartridge cleaning process can be performed even with the alignment message showing in the display. Follow the steps below to perform an ink cartridge cleaning process from the front panel:
On the front panel, press Menu or Setup (depending on the model).
Press the Right Arrow (>) until Maintenance or Tools appears, and then press the Enter or OK .
Clean ink Cartridges should appear in the display. Press Enter or OK to begin the cartridge cleaning process.
A page will be printed during the cleaning process with all of the colors on it. If any of the colors or the black are missing, faded, or streaked on the alignment page, there is a ink cartridge problem.
Step four: Try to align the page again
HP products have two methods for aligning the ink cartridges, fully-automatic and semi-automatic. The steps are different for each type. Refer to the information below to determine which alignment method your product uses.
Automatic - these products use a sensor to check the alignment page as it is printed. You are not required to take any action to complete the alignment process. Click here if your model does not print an instruction page.
Semi-automatic - these products print the alignment page and instructions for scanning the alignment page using the scanner assembly. Click here if your model prints an instruction page .
Automatic cartridge alignment
Perform the following steps to align the ink cartridges:
Disconnect the power cord from the unit, wait five seconds, and then plug it back in. This will reinitialize the unit.
Print another alignment test page. If the Press Enter to align message is not currently on the front panel display, complete the following steps to print an alignment page:
Press Setup or Menu on the front panel (depending on the model).
Press the Right Arrow (>) until Maintenance or Tools appears in the display, and then press Enter or OK (depending on the model).
Press the Right Arrow (>) until Align ink Cartridges appears in the display, and then press Enter or OK (depending on the model).
To determine if the automatic alignment is functioning correctly, look into the output tray as the alignment page is printing; a blue light should be visible periodically on the page as the cartridges move back and forth. If this light is not present, the unit will not be able to align the cartridges and will require service.
If the blue light is visible and the alignment pages are printing correctly, but the alignment pages still fails, there still may be a hardware problem with the unit.
If there are no other printing problems and you wish to continue, use the information in the " Bypassing the ink cartridge alignment " section below to bypass the alignment. The information from last successful alignment will be used.
If the message keeps reappearing or other print quality problems occur, service the product.
Models with a semi-automatic ink cartridge alignment
Some HP products have a semi-automatic alignment process. These models do not have an additional sensor and will print two pages for the alignment process instead of one. The alignment page must be placed on the scanner glass or into the automatic document feeder (HP Officejet V series) and scanned.
Disconnect the power cord, wait five seconds, and then plug it back in. This will reinitialize the unit and force the scanner to calibrate again.

Jul 08, 2009 | HP PSC 2210 All-In-One InkJet Printer

2 Answers

Printer keeps showing : Press enter to align cartridges. After doing this it then prints out an alignment page and shows: Alignment failed please: Press enter Alignment failed. This goes on and on. I have...


I have found that if I put in an old aligned page the printer reads it as and the alignment is accepted. As for the cancelled message being in the window, I have had this problem too. I've ignored it and selected the copy button and it took the command. The only problem with hitting cancel is that you cannot turn off your printer. Every time you do you have to repeat the aligning and cancellation process.

May 02, 2009 | HP Officejet 5610 All-In-One InkJet...

1 Answer

Changed black cartridge. Machine works fine, but


To align the cartridge from the control panel:

Please follow the steps given below:

1. Please Load a plain paper.
2. Press and hold the "Scan" button for three seconds.
3. An alignment page prints.
4. Place the alignment page onto the scanner glass.
5. Press the "Scan" button.
6. Once scanning is complete, the cartridge has been aligned for optimal print quality. Alignment must be complete before continuing with any print jobs.

Apr 19, 2009 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

Hp officejet 6110


If machine does not print the colors it cannot align. Try changing the color and try again

Apr 03, 2009 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

Saying "enter to align cartridges continuously


You need to press the enter key on the top of the printer to start the alignment. On some of these devices you will need to place the printed alignment page face down on the scanner and then hit the enter key so that the printer can read the printed alignment page.

Dec 29, 2008 | HP OfficeJet G55 All-In-One InkJet Printer

1 Answer

Keep getting message Press Enter to Align Cartridges


after each alignment you press enter key or start key not cancel key,

Dec 12, 2008 | HP PSC 2175 All-In-One InkJet Printer

1 Answer

Align Print Cartridges


From the front panel (Macintosh and Windows)Press MENU or SETUP (depending on the model).
Press the right ARROW repeatedly until the display window reads Maintenance.
Press ENTER.
Press the right ARROW repeatedly until the display window reads Align Print Cartridges.
Press ENTER. The unit will begin the alignment process and the display window will read Printing Alignment Page
Verify that the alignment was successful after the page is complete.

Nov 10, 2008 | HP Photosmart 2710 All-In-One InkJet...

2 Answers

Printer cartridge alignment


You can also bypass the alignment. When the message for alignment displays on the display => Press Setup and Options (or Copy Options ) simaltanious.The last known alignment is used when the alignment is bypassed.

Sep 04, 2008 | HP PSC 2175 All-In-One InkJet Printer

Not finding what you are looking for?
HP PSC 2175 All-In-One InkJet Printer Logo

800 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Vinaya Kumar...
Vinaya Kumar...

Level 3 Expert

1121 Answers

Seeker5211
Seeker5211

Level 3 Expert

1088 Answers

kakima

Level 3 Expert

98694 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...