Question about Cameras

1 Answer

Camera is connected with USB and I don't see software to install

Posted by on

  • Steve Allison
    Steve Allison Mar 27, 2011

    Not including brand and model is a good way to never get a response.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 823 Answers

The problem is that you need to install the software before you connect the camera for the computer to auto recognize it.

If you dont have a disk that came with the camera to install before connecting the usb cord, go to the internet and search for the manufacturers website and download your software instead.

Download the software to your computer and follow the prompts for installing it. Then connect your usb cable. if the computer does not auto recognize the camera after the softwares been installed then you have a problem.

Posted on Mar 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My daughter was given a Disney Digital imaging (smile) camera. I hooked it up to computer, but nothing? The amera says it has 4 pictures on it


Your computer must recognize your camera automatically,.
Go to control panel -- device manager and look if they are a device iht a yellow mark .
If have a yellow mark, select and rigt clik "uninstall"
Restart your PC
If don``t work

Try connect in another USB Port
Try connect in another computer
If don`t work, maybe the USB cable is failure

Is important for people who share their knowledge, know your comments.
If the answer is helpful, rate my answers

Sep 22, 2011 | Disney Pix Click Digital Camera

1 Answer

Download photos to computer


If you used a SD card in your camera then just pull that card out (when camera is off) and plug it in your laptop or use USB SD card reader and then you can copy all the images in the SD card in your computer hard drive.

If you used camera internal memory then you need to install a software called Kodak EasyShare provided with the camera in a CD. If you don't have the CD, you can download this software from kodak website. Now install this software and then connect the camera with your computer using the USB cable provided with the camera. Make sure you have batteries in the camera. When you have plugged the camera, turn on the camera and kodak easyshare software will detect the camera and let you browse the photos in the camera memory.

Jun 01, 2011 | Kodak EasyShare One Digital Camera

1 Answer

Kodak Z1012 IS camera into usb port will not send pictures to my computer or my documents.


hi let me save you pocket. Instead of repairing your camera would be economical in this issue. you just buy usb memory card reader about $10. you put your sd card into the reader and connect to computer. That is easy. you click on my computer, you will see a new drive folder. rest of work is yours...However it will cost to you if you want to repair the problem. your camera might has usb port defective and local repair shop would charge around $65 to 125 depend on what they really want to charge. thanks and best regard!

May 23, 2011 | Kodak EasyShare Z1012 IS Digital Camera

1 Answer

Need win7 driver for tasco digital trail camera


turn camera on, don't connect it to usb port, yet. After it turns on, push menu button, now connect it to your usb port. Disregard when it asks about installing driver software. If you follow these steps your computer will recognize it as another drive and ask open folder to view files,etc.


Hope this bit of info helps! :D

Best of luck

May 23, 2011 | Computers & Internet

1 Answer

I install the software but I am unable to download photos and videos...I follow instructions but I can't and I don't know why. I connect the camera after I've installed the software and...


Try NOT connecting your camera to your computer.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

May 21, 2011 | Fuji Finepix Z20fd Digital Camera

1 Answer

How do you upload videos to your computer


you need to install your camera's software into your computer. Also, you need to have a usb cable interface for your camera to connect to your computer.

Once the software is already installed, connect the USB cable to your camera and then connect the bigger end to the computer's USB. Now the camera's software will open and automatically upload the files in it's memory card.

Dec 29, 2009 | Kodak EasyShare C913 Digital Camera

2 Answers

Labtec webcam not working why i did every thing my computer not detecting this ****** i install all the posible drivers already i used window xp. I hate this man.


ok, uninstall all related drivers to this camera,


Now using the supplied disk install the camera software but please do not connect the camera YET, if the camera is already connected,
remove the camera and reboot,

so you installed the camera software now plug the usb camera in, it will now detect the install camera software and work.

Regards
gewiz.

Dec 05, 2009 | Labtec 961307-0914 Webcam

2 Answers

Drivers


if your operating system is windows xp or even vista go to logitech.com select the usa site then go to support....Drivers....find your camera download them unplug the web cam install software then plug the camera in when prompted to

May 28, 2008 | Logitech Webcam

1 Answer

Don´t download


If you have done what mugman asks, try this fix:

My daughter just received one of these camera's for her 6th birthday and is extremely excited. I am running Windows XP and was getting the "No pictures on camera" error. I tried downloading the drivers for this but that did not work. Here is what I did to get the camera working:

1) Connect the camera with the provided USB cable.
2) Download the latest driver from the Digital Blue web site: http://digiblue.com/customer-service/downloads/index.html, select the "The Disney Pix Micro Drivers for WIN ME, 2000, XP"
3) Install this driver, this will not enable the camera to work yet.
4) After this driver has installed, go to Control Panel
5) Select System
6) Select the Hardware tab
7) Select Device Manager
8) Find the device in the list (mine said "USB Digital Still Camera"), will probably have the yellow exclamation mark on it saying that it is not working.
9) Double click the device
10) Select "Reinstall Driver" from the General tab
11) When asked if Windows can connect to Windows Update to search for software, select "Yes, this time only" and click Next.
12) Choose "Install the software automatically" and click Next.
13) You should get a message saying the driver for the "DB CIF Cam" has not passed the Windows Logo testing, select "Continue Anyway".
14) Click Finish.
15) The first time I did this, I needed to take a picture while the camera was connected to the PC.

Apr 19, 2008 | Disney Pix Micro Digital Camera

2 Answers

Camcorder connection to pc


Firstly ensure you are connecting it into the same USB port as last time, as it will look for drivers if in a different port. Also worth checking to see if another USB device is detected in the same USB port(eg usb pen,dongle, game controller etc),if so the port is ok. If still nothing remove camera and lead. If you still have the software and driver cd that you got with the camera, dig it out. If you have the installation cd, look in Start>Control Panel>Add & Remove Programmes and look for the Sony driver or software in the list. Click on the line and then on right hand side click remove. Insert the cd and re-install drivers or let it autorun, and only connect your camera when instructed to do so; or, after the installation has finished. Hope this works, as the connection between camera and pc is either a lead fault or camera input fault if none of above works.

Oct 30, 2006 | Sony Handycam DCR-TRV280 Digital Camcorder

Not finding what you are looking for?
Cameras Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cameras Experts

kakima

Level 3 Expert

102366 Answers

Steve

Level 3 Expert

3287 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you a Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...