Question about Sony Audio Players & Recorders

1 Answer

Sony HHTS360 HDMI OUT does not send signal to my Sony HDTV. It worked fine Friday night but when I turned it on Saturday morning the tv message read "no signal" and I had no picture or sound.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 961 Answers

Make sure your connections are good unplug and plug in again. They are not real hard to pull out. This is a bluray player correct? If that doesn't work, do you have any other cables you can use to test your blueray player? Depending on what you have for output,input, you can use "composite"(red, whute, green"), component(blue, green, red), to check output of bluray. You will not get audio using component cables. You will have to use red and white composite or digital audio. Let me know what happens at "add a comment"
Dave

Posted on Mar 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a cs 1000 amp that lost a channel what do i need to do


Install a patch cord between Graphics in and Graphics out. There is a normally closed contact in the graphics in jack and it will cause loss of signal if it is dirty.

Jun 23, 2014 | Peavey Audio Players & Recorders

1 Answer

No video or audio input through composite video or HDMI 1 on an Emerson 32 inch LCD HDTV


Check and replace its main power regulator board. It is not working. Might be faulty.

Jan 29, 2013 | Emerson LC320EMX 32 in. LCD HDTV

1 Answer

I can't get a signal between my Sony Blu-Ray Disc/DVD Player and Samsung HDTV monitor. They are connected via a HDMI cable. A brief message on the HDTV reads "Not supported".


First, try to reset resolution of HDMI Sony BD output.
Unplug HDMI cable from TV and change to Component connection to reset BD output resolution.
Than after you entered to resolution menu, choose to standart resolution 720 or 480 i.
If above methode working, try to reconect HDMI cable again to HD TV.
If any problem with picture or still "Not Supported" messege appear, i suggest to change HDMI cable first.
i hope its work.

Mar 14, 2011 | Televison & Video

1 Answer

Green Lines with Picture behind


Could be serious...but first check the screen modes (for split screen, format, etc) to be sure the tv is set up properly for the picture you are trying to watch. Switch the input to a DVD or something similar. Is it the same? If not, you have a mode/resolution problem with the tuner and perhaps some other device.

Jun 28, 2009 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Voice message


xbox live is having issues right now they are working on it and hope to have it back up this week sometime. If you want to know more go to www.xboxlive.com and search under status this will give you the xbox live status whether its back up or not. This started late friday night or early saturday morning.

Dec 31, 2007 | Microsoft Xbox 360 Console

2 Answers

Hitachi pd7200 42" plasma


unplug. leave off for a few minutes. small chance it will reset.
also, it might have lost its input setting and is no longer looking at the input you send the source signal to.
good luck
mark

Dec 02, 2007 | Hitachi 42EDT41 42 in. HD-Ready Plasma...

1 Answer

Tv wont turn on


3 blinks corresponds to convergence ICs
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Nov 11, 2007 | Panasonic PT-47WXC43 47" Rear Projection...

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

5056 Answers

The Knight
The Knight

Level 3 Expert

74136 Answers

Are you a Sony Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...