Question about Belkin (F5D9230-4) Wireless Router (F5D92304)

2 Answers

Hello, Problem within setup utility. I go to client IP filters to block acces at specific hours in Schedule rules. If I want to block from 23.30 evenings till, say, 06.00 in the morning the error message is given that the end time must be greater then starting time, this for a specific day. So in the sunday field I use 23.00 in start field and 06.00 in end field.........testing using 06.00 in the Monday end field does not work either.......how does this work?

Posted by on

  • ygosset Mar 27, 2011

    I don't see an option to allow access by time, only to restrict access through IP filters...........

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

The blocking thing is per day. so if you want to block or set rule like for a example monday of 23:30PM to tuesday of 6AM, you should have 2 rules, 1 is for monday which is 23:30- 24:00 and tuesday which is 0:00-6:00. that should work

Posted on Mar 27, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 451 Answers

The easiest way to do this is to allow Internet from 0600 to 2300 instead of blocking internet from 2300 to 0600.

Posted on Mar 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Netgear N300 Firewall setting


wait you using DHCP? What's to stop the computer from releasing the dhcp lease and obtain a new IP besides the 192.168.0.5 that you are blocking?

Apr 11, 2017 | NetGear N300 Wireless Router

1 Answer

My router can not access dhcp.Why?


A DHCP Reservation is a permanent IP address assignment. It is a specific IP address within a DHCP scope that is permanently reserved for leased use to a specific DHCP client.
You can configure a DHCP reservation in your DHCP server when you need to reserve a permanent IP address assignment. You can use these reservations for DHCP-enabled devices like print and file servers or other application servers which always have the fixed IP address on a network.
To configure a DHCP reservation, follow the steps provided below:

Step 1:
Access the router's web-based setup page. For instructions, click here.
NOTE: To learn how to access the web-based setup page on a Mac computer, click here.
Step 2:
Click Setup > Basic Setup.

kb17362-001_en.png
Step 3:
Make sure that the DHCP Server option is Enabled. Click the DHCP Reservation button if you want to assign a fixed local IP address to a MAC address.

kb17362-002_en.png
Step 4:
When you click on DHCP Reservation, a new web browser window will pop-up. Click the Select checkbox to reserve a client's IP address. Click the Add Clients button afterwards.

kb17362-003_en.png Step 5:
If you want to manually assign an IP address, enter the client's host name in the Enter Client Name field. You can do this as well in the IP Address and MAC address fields.
Step 6:
Click the Add button.

kb17362-004_en.png
Step 7:
A list of DHCP clients and their fixed local IP addresses will be displayed at the bottom of the screen. If you want to remove a client from this list, click the Remove button.

kb17362-005_en.png

On this window, you can do any of the following:
• Click the kb17362-006_en.png button to save your changes.
• Click the kb17362-007_en.png button to cancel your changes.
• To view the most up-to-date information, click the kb17362-008_en.png button.
• To exit this screen, click the kb17362-009_en.png button

If you need more help come back.Post / thumbs / testimonial are welcome!.

Nov 20, 2010 | Linksys WRT160N Wireless Router

1 Answer

I have a dlink router of model DI-1750, i have to configure DHCP..can anyone help me regarding the configuration commands.


A DHCP Reservation is a permanent IP address assignment. It is a specific IP address within a DHCP scope that is permanently reserved for leased use to a specific DHCP client.
You can configure a DHCP reservation in your DHCP server when you need to reserve a permanent IP address assignment. You can use these reservations for DHCP-enabled devices like print and file servers or other application servers which always have the fixed IP address on a network.
To configure a DHCP reservation, follow the steps provided below:

Step 1:
Access the router's web-based setup page. For instructions, click here.
NOTE: To learn how to access the web-based setup page on a Mac computer, click here.
Step 2:
Click Setup > Basic Setup.

kb17362-001_en.png
Step 3:
Make sure that the DHCP Server option is Enabled. Click the DHCP Reservation button if you want to assign a fixed local IP address to a MAC address.

kb17362-002_en.png
Step 4:
When you click on DHCP Reservation, a new web browser window will pop-up. Click the Select checkbox to reserve a client's IP address. Click the Add Clients button afterwards.

kb17362-003_en.png Step 5:
If you want to manually assign an IP address, enter the client's host name in the Enter Client Name field. You can do this as well in the IP Address and MAC address fields.
Step 6:
Click the Add button.

kb17362-004_en.png
Step 7:
A list of DHCP clients and their fixed local IP addresses will be displayed at the bottom of the screen. If you want to remove a client from this list, click the Remove button.

kb17362-005_en.png

On this window, you can do any of the following:
• Click the kb17362-006_en.png button to save your changes.
• Click the kb17362-007_en.png button to cancel your changes.
• To view the most up-to-date information, click the kb17362-008_en.png button.
• To exit this screen, click the kb17362-009_en.png button.

If you need more help come back.Post / thumbs / testimonial are welcome!

Nov 20, 2010 | D-Link Computers & Internet

1 Answer

How to set my wrt300n router to use static ip,... i´ve have a problem whit my ps3, and want to use static ip, instead of dhcp(dynamic) should i do it before i do it on my pc and how to do it on the...


Hi,
You may want to enable the DHCP reservation feature of the router.
What is DHCP Reservation and how do I configure it?

What is DHCP Reservation?
A DHCP reservation is a permanent IP address assignment. It is a specific IP address within a DHCP scope that is permanently reserved for leased use to a specific DHCP client.
You can configure a DHCP reservation in your DHCP server when you need to reserve a permanent IP address assignment. Use reservations for the DHCP enabled devices like print and file servers or other application servers which always have the fixed IP address on network.


Step 1: Access the router's web-based setup page. For instructions, click here
Step 2: When the router's web-based setup page appears, click Setup.
Step 3: Click on Basic Setup.
Step 4: Make sure that DHCP Server is Enabled. Then, click the DHCP Reservation button if you want to assign a fixed local IP address to a MAC address.

Aug 26, 2009 | Linksys WRT300N Wireless Router

1 Answer

Does thies parts work togeher ?? WLI-PCI-G300N too D-LINK Router?


Hi! the buffalo wireless adapter should connect the the dlink wireless router if the driver is properly setup and configured. and u have to setup as well the dlink router, bcoz there is an option on the router - WISH (Wireless Intelligent Stream Handling) prioritizes the traffic of various wireless applications. u can find that on the setup page and select advance and u will see the option WISH.. here is a help list in order for u to setup the router using the WISH Technology-
WISH is short for Wireless Intelligent Stream Handling, a technology developed to enhance your experience of using a wireless network by prioritizing the traffic of different applications.
WISH Enable WISHEnable this option if you want to allow WISH to prioritize your traffic. Priority Classifiers HTTPAllows the router to recognize HTTP transfers for many common audio and video streams and prioritize them above other traffic. Such streams are frequently used by digital media players.Windows Media Center Enables the router to recognize certain audio and video streams generated by a Windows Media Center PC and to prioritize these above other traffic. Such streams are used by systems known as Windows Media Extenders, such as the Xbox 360. AutomaticWhen enabled, this option causes the router to automatically attempt to prioritize traffic streams that it doesn't otherwise recognize, based on the behavior that the streams exhibit. This acts to deprioritize streams that exhibit bulk transfer characteristics, such as file transfers, while leaving interactive traffic, such as gaming or VoIP, running at a normal priority. WISH Rules A WISH Rule identifies a specific message flow and assigns a priority to that flow. For most applications, the priority classifiers ensure the right priorities and specific WISH Rules are not required. WISH supports overlaps between rules. If more than one rule matches for a specific message flow, the rule with the highest priority will be used.
NameCreate a name for the rule that is meaningful to you.Priority The priority of the message flow is entered here. Four priorities are defined:
  • BK: Background (least urgent).
  • BE: Best Effort.
  • VI: Video.
  • VO: Voice (most urgent).
ProtocolThe protocol used by the messages.Host 1 IP RangeThe rule applies to a flow of messages for which one computer's IP address falls within the range set here.Host 1 Port RangeThe rule applies to a flow of messages for which host 1's port number is within the range set here.Host 2 IP RangeThe rule applies to a flow of messages for which the other computer's IP address falls within the range set here.Host 2 Port RangeThe rule applies to a flow of messages for which host 2's port number is within the range set here. This will work if you will be able to setup the router and the buffalo.. and ofcourse for best performance of this product, it is always advise by the manufacturer to use the same brand in order to work with best features, but this device will work..

Aug 12, 2009 | D-Link Xtreme N DIR-655 Wireless Router

1 Answer

How do you unblock your computer with a D-Link DIR-628 router? My brother blocks me and I'm trying to play some team fortress 2. My connection just dies cause he blocked the router at the worst times. Is...


You can do a port forwarding first, remember, to configure router you have to log in as an administrator.

Type in this in your browser's address bar.
http://192.168.0.1
Log in.

These are the ports
Steamclient1: 27000 - 27020
Steamclient2: 27020 - 27050
SteamServ: 27015

Do like this(at your own risk-port forwarding may be vulnerable)

This will allow you to open a single port or a range of ports.
Port Forwarding
Enter a name for the rule or select an application from the drop-down menu. Select an application and click << to populate the fields.
Enter the IP address of the computer on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), you computer will be listed in the “Computer Name” drop-down menu. Select your computer and click <<.
Enter the TCP and/or UDP port or ports that you want to open. You can enter a single port or a range of ports. Seperate ports with a common.
Example: 24,1009,3000-4000
Select Allow All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced > Inbound Filter page.
The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section.

You can also add application rules

Name: Enter a name for the rule. You may select a pre-defined application from the drop-down menu and click <<.
This is the port used to trigger the application. It can be either a single port or a range of ports.
Select the protocol of the trigger port (TCP, UDP, or Both).
This is the port number on the Internet side that will be used to access the application. You may define a single port or a range of ports. You can use a comma to add multiple ports or port ranges.
Select the protocol of the firewall port (TCP, UDP, or Both).
The schedule of time when the Application Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section.

Your brother may be filtering your mac address(network card address)
Check from Advanced->MAC address filtering
Turn it off.

You can set a policy also to prevent this.

Here's how

Go to Advanced-> Add policy of your router configuration page.

Do the following

Click the Add Policy button to start the Access Control Wizard.
Click Next to continue with the wizard.
Enter a name for the policy and then click Next to continue.
Select a schedule (I.E. Always) from the drop-down menu and then click Next to continue.
Enter the following information and then click Next to continue.
• Address Type - Select IP address, MAC address, or Other Machines.
• IP Address - Enter the IP address of the computer you want to apply the rule to.

(To find the MAC address
(click Start, then Run, then type cmd in the text box.)
Type in ipconfig/all in the Command Prompt Windows.
The 12-digit Physical Address is the same as MAC address
)

Select the filtering method and then click Next to continue.
Access Control Wizard (continued)
Enter the rule:
Enable - Check to enable the rule.
Name - Enter a name for your rule.
Dest IP Start - Enter the starting IP address.
Dest IP End - Enter the ending IP address.
Protocol - Select the protocol.
Dest Port Start - Enter the starting port number.
Dest Port End - Enter the ending port number.
To enable web logging, click Enable.
Click Save to save the access control rule.

Go to tools-> syslog to create a new user. you can create an admin account here.

You can download the manual of the router from here.
If this is helpful to you, please rate this :)
Thanks :) Wish You Luck

Jun 16, 2009 | D-Link DIR-625 (790069292637) Wireless...

2 Answers

Printerserver blocked by f-secure


You do it by enter the settings in F-secure, revove the server from the blocked ip:s and give f-secure the command that that ip is a secure ip
You will find those settings under the firewall in f-secure

Nic

Feb 16, 2009 | F-Secure Anti-virus Client Security...

2 Answers

DFL-210, follow example to block web site


i have the same problem....try this
In order to enable port forwarding you need to create two rules on the DFL-210. The first rule is for service to Static Address Translation (SAT) and the second rule is for Network Address Translation (NAT) to Static Address Translation.
The first rule is created using the following steps:
  • Under Rules/IP Rules/wan_to_lan add a new rule
  • Under the general tabName = enter desired nameAction = SAT
    • Service = Select the desired service
    • Schedule = Select the desired schedule or None
    • Source interface = any
    • Source Network = all-nets (you specify a specific inbound address or range)
    • Destination Interface = core
    • Destination Network = wan_ip3. Under SAT tab
  • Under the SAT tab
    • check destination IP address
    • New IP Address = the address you want to forward to
    • New Port = the port you want to forward to
    • Create the rule by clicking OK.
The second rule is created using the following steps:
  • Under Rules/IP Rules/wan_to_lan add a new rule
  • Under the general tabName = enter desired nameAction = Allow
    • Service = Select the desired service
    • Schedule = Select the desired schedule or None
    • Source interface = any
    • Source Network = all-nets (you specify a specific inbound address or range)
    • Destination Interface = core
    • Destination Network = wan_ip
Create the rule by clicking OK.
Activate the configuration by using the Configuration/Save and Activate menu item.
posted.

Jan 06, 2009 | D-Link Netdefend DFL-210 (DFL210)...

1 Answer

How do I setup filters on my wireless router?


IP Filters IP filters block access to ports or a series of ports from an IP address on the LAN. For example, if you did not want the computer with IP address 192.168.0.100 to access the Internet, then you would block that IP address from accessing port 80. Step 1 Open a web browser and type the IP address of the wireless router in the address bar (default is 192.168.0.1). Press Enter. Step 2 The default username is admin (all lower case) and the default password is blank (nothing). Click OK. Step 3 Click the Advanced tab and then click Filters to the left. Step 4 Select IP Filters using the radio buttons. Step 5 Select the Enabled radio button. Step 6 In the first field next to IP enter the IP address you want to block access from. If you want this to apply to a range of IP addresses, then enter the ending IP address in the second field. Step 7 In the first field next to Port enter the port you want to block. To block a range of ports, enter the ending port number in the second field. Then select the protocol type (TCP, UDP, or Both) using the drop-down list next to Protocol Type. Step 8 Next to schedule select Always using the radio buttons to continuously enable this filter, or select the From radio button to set a schedule using the time and day drop-down boxes below. Step 9 Click Apply and then click Continue to save the new settings. URL Blocking URL Blocking is used to block web sites that contain certain keywords. Step 1 Open a web browser and type the IP address of the wireless router in the address bar (default is 192.168.0.1). Press Enter. Step 2 The default username is admin (all lower case) and the default password is blank (nothing). Click OK. Step 3 Click the Advanced tab and then click Filters to the left. Step 4 Select URL Blocking using the radio buttons. Step 5 Select Enabled using the radio buttons. Step 6 In the text box below enter a keyword to block. To delete a keyword, select it from the box below the text box, and click Delete. Step 7 Click Apply to add the keyword to the list. MAC Filters MAC Filters allow you to allow or deny access to the LAN by specifying MAC addresses. Step 1 Open a web browser and type the IP address of the wireless router in the address bar (default is 192.168.0.1). Press Enter. Step 2 The default username is admin (all lower case) and the (default password is blank (nothing). Click OK. Step 3 Click the Advanced tab and then click Filters to the left. Step 4 Select MAC Filters using the radio buttons. Step 5 In the section MAC Filters, select the radio button for the mode you would like to use. Disabled - Disables this feature and will allow all wireless clients to connect. Allow - Blocks all clients except for what you enter in the list. Deny - Allows all clients except for what you enter in the list. Step 6 Enter the name used to identify the entry next to Name. Step 7 Enter the Ethernet MAC address that you wish to Allow or Deny next to MAC Address. Step 8 Click Apply and then click Continue to save the new settings. Domain Blocking Domain blocking lets you allow or deny access to certain websites. Step 1 Open a web browser and type the IP address of the wireless router in the address bar (default is 192.168.0.1). Press Enter. Step 2 The default username is admin (all lower case) and the default password is blank (nothing). Click OK. Step 3 Click the Advanced tab and then click Filters to the left. Step 4 Select Domain Blocking using the radio buttons. Step 5 In the section Domain Blocking, select the radio button for the mode that you would like to use. Disabled - Disable this feature and will allow all clients on the LAN to access any website. Allow - Permits access to all websites except domains specified in the Blocked Domains section. Deny - Allows access only to domain specified in the Permitted Domains section. Step 6 In the Permitted Domains section, enter a domain to permit. In the Blocked Domains section, enter a domain to block. - or To delete a keyword, select it and click the Delete button. Step 7 Click Apply to add the domain the list.

Feb 16, 2006 | D-Link Express EtherNetwork DI-604 Router

1 Answer

Nortel Contivity VPN client?


Nortel Contivity will work with the your D-Link router, however its functionality depends on the authentication type (AH will not work), NAT compatibilty mode, and disabling keep alives on the server. Contact your Network Administrator to find out how your VPN is configured. Step 1 Verify that you are using the latest version of firmware on your router. Step 2 Login to the Web Management for your router by entering its IP address (192.168.0.1) in your web browser. The default username is admin, and the password is blank. Step 3 Click the Advanced Tab to access the Virtual Server Settings. There is a list of pre-defined Virtual Server Rules towards the bottom of the page. Find the IPSec Rule. Click the pen and paper icon to edit its settings. Enable the rule, enter the IP address of the computer attempting to connect to the VPN in the Private IP field, then Apply the changes. Step 4 Create a new Virtual Server entry. Name the Virtual Server, "NortelVPN". Enter the IP address of the computer attempting to connect to the VPN in the Private IP field. For the Protocol Type, select Both. Enter 9550 for both the Public and Private Ports. Set the Schedule to always, then Apply the settings. Step 5 Access the Tools Page, then click the Misc button. Disable IPSec Pass-through, then click Apply. If the VPN Server is properly configured to work with clients behind NAT routers you should be able to connect to the VPN.

Feb 16, 2006 | D-Link Express EtherNetwork DI-604 Router

Not finding what you are looking for?
Belkin (F5D9230-4) Wireless Router (F5D92304) Logo

Related Topics:

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...