Question about Canon PowerShot A570 IS Digital Camera

2 Answers

Canon A570IS - the flash does not fire in any mode

The flash does not fire in any mode of operation whenever the flash indicator blinks. So, image is not captured if flash is required.

But its working okay without use of the flash. I have done reset to defaults and tried too. it did not help.

Any clues how to set this right? or do a hardware reset or anything to make the flash fire?

Thanks
Ilango

Posted by on

  • 1 more comment 
  • Anonymous Nov 29, 2008

    Mine failed, just like yours, and not too long after purchasing it. Luckily, it is still under warranty and I just mailed it in this morning. I'm terribly disappointed in Canon.

  • courtneyhenk Dec 01, 2008

    I am having the same problem myself. i contacted Canon and i am sending it back for repair!

  • mail9139 Jan 22, 2009

    I have the same problem. Looks like there is some problem with charging up the flash in this Model. What I have notices is when you experiencing this problem, Just turn off the display and start taking the picture using view finder. Later even if you turn on the display, camera is working normally.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I sent my camera to Canon service center and they have fixed the problem. Here is the repair note for this problem from canon.

"We have examined the product according to your request and it was found that the PCB assembly was not properly connected the strobe could not operate properly. The PCB assembly was reworked. Other inspection and cleaning and parts replacement were carried out ".

I have tested my camera and it is working correctly. One more information is that my camera more than one year old and warrantee expired on Dec 14 2008. I filed this claim Canon online on Jan 25th 2009 and it came out initial estimation as $0 and they did not charge me a penny. Hope this information will help you.

Posted on Feb 06, 2009

I am having this exact same problem. I've also noticed the camera body becomes very warm near the back of the flash.

Posted on Aug 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do i find the "postcard" symbol


It's one of the shooting modes. See "Postcard Mode" on page 32 of the Advanced Guide. If you need them, you may download the manuals from here.

Mar 02, 2013 | Canon PowerShot A570IS 7.1MP Digital...

1 Answer

How do you turn off the flash on samsung sl202


When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the left tab. When the menu is not displayed on the LCD monitor, the LEFT button operates as the FLASH ( ) button.  Selecting the flash mode 1. Select a desired Recording mode, except the [Movie] mode and the [DIS] mode. 2. Press the Flash button until the desired flash mode is displayed on the LCD monitor 4268flashicon.jpg The flash does not fire. Select this mode when capturing images in a place or situation where flash photography is prohibited. When you capture an image in poorly lit conditions, the camera shake warning indicator ( ã ) will appear on the LCD monitor.

Oct 24, 2009 | Samsung SL202 Digital Camera

1 Answer

Canon S3 IS - Images are darker or underexposed even in normal ambient light. Started happening just recently


If you are shooting using AUTO mode, maybe the settings were changed to a manual modes. If so, check for settings. Flash fires automatically only in AUTO. On manual modes you must force the flash to fire.

Aug 09, 2009 | Canon PowerShot S3 IS Digital Camera

1 Answer

My speedlite keeps flashing the zoom control and freezes


Make sure the built-in diffuser is pushed in all the way... that diffuser is only designed to work when in "14-mm" mode so whenever that diffuser is down, even just a little bit, the entire display will flash and 14 mm will be shown as the focal length of the flash.

May 28, 2008 | Canon SPEEDLITE 580EX TTL Flash

1 Answer

White pictures


Maybe you are shooting in the manual mode (shown as "M" on the dial) with an incorrect exposure setting. Make sure that the dial is in "Auto" mode to check if it will shoot correctly then. If you are still getting the white picture on "Auto", then it may be a defective image sensor in the camera - clearly a warranty claim.

Mar 31, 2008 | Canon PowerShot A570 IS Digital Camera

1 Answer

Flash wont fire


my flash won't turn on at all either.

Mar 23, 2008 | Nikon Coolpix S51c Digital Camera

1 Answer

No image


No image in shooting mode on Canon S500. Flash operates and shutter clicks. Whats wrong?

Nov 12, 2007 | Canon PowerShot S500 IXUS 500 Digital...

1 Answer

CANON POWERSHOT A-85 FLASH PROBLEM


Watch the flash,(this might hurt your eyes a bit. If you are getting dark pictures the flash may not actually be firing without you noticing it. It is also possible that the output of the flash is not as high as it should be. This is not very likely though. Either way, since you have tried all posible settings, you are going to have to take it to a shop.

Mar 28, 2007 | Canon PowerShot A85 Digital Camera

1 Answer

Canan powerhot a400 mallfunctions


Upper Indicator
" Green: Metering complete (two beeps sound)
" Orange: Flash will fire
" Blinking Orange: Camera shake warning / Insufficient exposure
Lower Indicator
" Yellow: Macro Mode / Manual Focus
" Blinking Yellow: Focusing difficulty* (single beep sounds)
* When the indicator blinks yellow, lock the focus before shooting.
lcd_focus_indicators_a70.gif The AF frame appears as follows when the LCD monitor is on. " Green: Metering complete
" Yellow: Focusing difficulty (When AiAF is turned on.)

Dec 06, 2006 | Canon PowerShot A400 Digital Camera

Not finding what you are looking for?
Canon PowerShot A570 IS Digital Camera Logo

Related Topics:

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

kakima

Level 3 Expert

102366 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

165 Answers

old marine
old marine

Level 3 Expert

1774 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...