Question about Sanyo Microwave Ovens
it's less than one year old, it should be fully covered under warranty.
I'd suggest contacting the manufacturer to get it fixed free.
We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.
Posted on Aug 08, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 19, 2015 | Sanyo Microwave Microwave Oven
Oct 09, 2015 | Sanyo Microwave Ovens
Apr 05, 2015 | Sanyo Microwave Ovens
May 23, 2011 | Sanyo EMC8787B Microwave Oven
It sounds like the magnetron may have
either failed or is not being supplied with the extremely high
voltage required to run it.
SAFETY IS PARAMOUNT
This is a job for a professional but if
you are safety clued up, here's instruction.
Make sure the !!!!any capacitors are discharged!!!!! before attempting any sort of repair.
Check the door interlock switches first then the high voltage diode with either an AVO model 8 or moving coil meter on high resistance range for short circuit, (DVM's won't show the fault!), the capacitor can fail and go short circuit, the feed fuse on the primary of the high voltage transformer and then finally, the magnetron is best checked by substitution.
Hope that helps.
Mar 21, 2011 | Sanyo Microwave Ovens
Replacement of the
lamp should be carried out by a qualified appliance repair service.
SAFETY IS PARAMOUNT!
this only if you are competent.
But here is a basic method if you are
mechanically minded and have electrical safety knowledge.
The lamp is sat in a housing and its
position is adjacent to the vent holes that it shines through.
If you feel confident, disconnect it from the mains power, remove anything in the cavity.
Remove the microwave cover. Purchasing a new replacement lamp will be useful as it will give you an idea of what it looks like. Locate the dead lamp remove the lamp and fit the new one. Replace the covers. Plug it back in and try the lamp by opening the door.
Hope this helps.
Feb 14, 2011 | Sanyo Microwave Ovens
Jun 06, 2010 | Sanyo Microwave Microwave Oven
May 22, 2008 | Sanyo Microwave Ovens
106 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: