Question about Acer ASPIRE T180-UA381B DESKTOP PC

2 Answers

Speakers came unplugged and when I try putting them back, there is no sound

Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 961 Answers

I'm going to give two waysnto check this:
1 Click on the speaker symbol in your task bar at lower right of your screen. Is there red X on it? Right click on the speaker and click on playback devices. A window will come up and should have your device in it with a green check mark on keft and sound bars on left. Right click on your device and you should see "disable". If you see "enable" click on that, and exit. Right click on the item again and click on "open sound mixer" and adjust your volume. If there is nothing in box try right clicking on the empty window and click "show disconnected device" If your device shows up click on it and go through steps above.
2 Click "start" find "control panel" and click on to open. In your list(icons), find "device manager". Right click on that, open, then click continue. Click on the box with + next to "sound video and game controllers". You should see your device in the drop down. Right click on it and you should see "disable". If you see "enable" click on that and exit. Right click on it again and click on the "properties tab". You should see a window taht says "this device working properly". Now go back to your speaker in the taskbar. Right click on it and click on "open sound mixer" and adjust your volume.

Posted on Mar 27, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 63 Answers

Ensure you are plugging into the right plug. there are probably at least 3 that look similar. the right on is usually the "GREEN" plug.

Posted on Mar 27, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Logitech speakers Z506 no sound after unplugging headphones

all i know is try to powercycle if that doesnt work plug headphones in and take back out it kight just work

Feb 18, 2013 | Logitech Z506 Surround Sound Speakers

1 Answer

How to fix sound on my lg 42

Some simple things you may already have tried but I will list:

Unplug set for a while and then plug back and see if sound--when unplugged the set may reset.

In main menu make sure speakers are not switched off.

I doubt it is mute but if also using some type of box check that its volume is not all the way down.

If internal speakers put your ear right to them---hear low sound or a buzz or hum?

If using external speakers of any kind look at the hookup and switch to make sure internal/external is correctly selected

If NONE of these help you have an audio problem and should first contact LG (yes it takes time on the phone) to inquire if some common issue or a possible software upgrade is available for this.

Last: Some failure has occurred either in the audio circuit or something that feeds it.

Mar 22, 2012 | LG Televison & Video

2 Answers

No sound

Unplug,replug the tv back about an hour later.Go to the tv menu.Go to AUDIO setting,go down to reset,the audio setting will go back to factory setting.The tv will have it sound back.Not,than ur Tuner board it dead,must be replaced.Tries websites like, to buy a refurbish Tuner board for the replacement.

Jun 16, 2010 | Vizio L32 32 in. LCD HDTV

1 Answer

I have no indication of sound when I test my microphone. Speakers and video are OK.

I have the same webcam.
It happens once in a while to me, also. What I did was unplugged it and put the USB cord into a different port. It's happened a couple times, mostly it happened when something got to loud it automatically set itself to a different sound pick up level for louder noises, and I'm thinking unplugging it and putting it to another USB port reset the camera. If unplugging it and putting it back in doesn't work, I'd try to un install the disc, and re install it.

Aug 12, 2009 | Microsoft LifeCam VX-3000 Web Camera

1 Answer

Unplugged speakers, plugged em in -- now I don't get ANY sound

check ur sound drivers.. check whether they are uninstalled, and try to check in the sound and audio devices in control panel...

Jul 25, 2009 | Bose MediaMate Computer Speakers

1 Answer

Altec Lansing BXR1121

I have same speakers, but only woffer is working, speakers doesnt work. i am really in big trouble.

Apr 24, 2009 | Audio Players & Recorders

2 Answers

My computer speakers just went silent in the middle of a song

Do the speakers have power? Check the fuse.

Where are you plugging your headphones?
Where are the speakers connected? Is it the same jack as the headphones?

Have you tried plugging the speakers into the headphone jack vs the soundcard?

Mar 13, 2009 | Harman Kardon HK695 Computer Speakers

1 Answer

Advent ADE-210F lost operating manual

unplugged speakers now no sound is coming out of them

Dec 10, 2008 | Audio Players & Recorders

1 Answer

Speakers don't work after getting unplugged once! Light doesn't turn on, etc.

Well it sounds to me like you got them in the wrong plug try a diferent one it wont hurt

Dec 01, 2007 | Dell A215 Computer Speakers

2 Answers

Noise like a crrrrr... eaven when the volume is at the lowest point

This is feed back from a component in the computer or one of the external devices. Try progressively unplugging all peripherals one by one. Came back if nothing reveals it self

Jun 26, 2007 | Creative Labs PlayWorks PS2000 Digital...

Not finding what you are looking for?

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

645 Answers

Alun Cox

Level 3 Expert

2678 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides