Question about Pulsar Watches

2 Answers

How do I set the digital time on my Pulsar 8010 it is currently running 1Hr behind the analogue. Whatever time i set it always goes back to 1 Hr behind.

Posted by on

  • neale960 Mar 28, 2011

    E-Mail recived not at all helpful, unable to find 8010 on list that you asked me to click on

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,080 Answers

Please note that no information was found for a Pulsar 8010 model watch.

You will have to look on the back of your watch for the engraved CALIBRE NUMBER.

Just use your mouse to click on the following link which will open a new webpage for you automatically. Once there you will see a detailed illustration of where to look on your watch for the calibre number:

http://www.fixya.com/PostAnswer.aspx?thid=8784937&ctgid=167&ref=unsl

Once you find your number, just select it from the drop down list on that page in the box labelled INSTRUCTIONS FINDER. Then select ENGLISH as the language, then click on the CHOOSE button right below that.

You should then see your manual open up in a separate window for you to look at.

You may need ADOBE READER installed on your computer to read PDF documents. You can download this free at WWW.ADOBE.COM if necessary. Click on the DOWNLOAD ADOBE READER button on right side of the ADOBE home page when you get there.

Good luck.

Posted on Mar 28, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers
  • frank thomas wilson
    frank thomas wilson Mar 31, 2011

    I was hoping it was there. I did not have a chance to look myself

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Waveceptor 3353. If I change time zone I can usually set the watch to show ,say, Paris time both digitally and in analogue. When I try to go back to my home time zone, London, the second hand...


If you cannot find the automatic way of setting the hands, you can manually reset the analogue hands by pressing the mode button until you reach the "HS" mode and using the 2 or 4 o'clock buttons to adjust the hands.

Dec 30, 2010 | Casio DW9051B-1V Wrist Watch

1 Answer

Casio aw-s90, analogue and digital time are not in sync. The analogue is about 2hr 25mins behind


If you haven't got instructions on how to align the hands with the digital display , you can get instructions from the Casio web site.
Go to the casio web site "casio.com".
Select "support" and the "manuals",
watches;
Accept terms
Select "watch manual archive"
Read the number of the back of your watch and enter it into the search box

Jun 08, 2010 | Casio AWS90-9AV Wrist Watch

1 Answer

How can you just set the analogue and digital time to the same current time? I have been studying this for two hours and the hands just keep going back and forth themselves.


Use this link: http://www.citizenwatch.com/COA/English/settings.asp Fill in requested details of your watch and click on GET SETTING INSTRUCTIONS, then click on INTERACTIVE SETTING INSTRUCTIONS. There you will find everything you need to set up your watch.
Rate me, plz.

Jan 04, 2010 | Citizen Skyhawk Eco-Drive JR306059F Wrist...

2 Answers

How do I set the analogue hands so hat they tell


Push the lower left mode button (C) until the bottom line of the LCD is "HS". Then press either to top right (B) or bottom right (D) buttons to change the position of the hands. The mode button selection is shown on page 1 of the manual. Changing the hands is described in the Analog Timekeeping section on page 4 of the manual. The manual is currently available here: http://ftp.casio.co.jp/pub/world_manual/wat/en/qw2735.pdf

Dec 06, 2009 | Casio WVA105HDA Wave Ceptor watch

1 Answer

I need instructions on setting the alarm for the Pulsar Chronograph 100M. I'm able to set everything else. Your response is greatly appreciated. THANKS!!


I answered this for different Fossil watch post, but I believe it will be the same for your watch.
I'll re-post the answer below.
------

To set the alarm on these models of Pulsar watches, do the following:
Looking at the face of the watch, there are two buttons and a crown on the right side. The TOP button is Button "A". - The BOTTOM button is Button "B".
There are 3 positions on the crown: IN (#0), FIRST CLICK (#1) & SECOND CLICK (#2). 
The small dials located at the bottom of the watch face (6 O'clock) are the alarm minute and hour dials.

First, pull the crown out to the second 'click' (position #2) ... This is all the way out. (STOP THERE! Pulling harder will harm your watch! Don't try to pull past position #2!)
Second, set the correct time. (plus one or two minutes... time to complete this.)
Third, with the crown still out to position #2, push button "B" (bottom) until the alarm minute and hour hands are set to the present time (same as the large dials).
Fourth, push the crown all the way in- to position #0.
The current time on the large dial should read the same as the small alarm 'time'. {This is the CURRENT TIME, not the alarm SOUND SET.}
To set the alarm SOUND time, pull the crown out to the first click (position #1).
Push button "B" until the dials of the alarm are at the time you want the alarm to sound... It can only be set within 12 hours! ... It does NOT know "am or pm".
When the desired time is set for the "alarm sound", push the crown all the way in (position #0).
The alarm dials will now indicate the time for your alarm to sound, NOT the current time. (this way, you know that the alarm is engaged.)
To reset the alarm- or disable it, pull the crown out to the first click (position #1) and hold button "B" down until the dials advance and stop at the current time... it will stop at the current time- then release button "B". --- Push the crown back in (position #0) and the alarm will now be disabled.

If the alarm dials are always moving and at the current time, you know that the alarm is disabled.
If the alarm dials are stationary and not moving with the time, you know that the alarm is engaged and set to the time shown.

I hope this helps.

Nov 05, 2009 | Pulsar Chronograph Watch

3 Answers

How to set time Casio W-89H two button watch


Actually, the watch has 3 buttons -- "Light" being the 3rd one. Press Mode until a number in the time mode begins flashing. Then press the Light button to get it to the hour indicator. Use the 12-24 Hr button to set it to the current hour. Then press the Light button again to get it to the minutes section. Again, use the 12-24 Hr. Button to set it to the next minute coming up in the current time. Then push the Light button again. This will bring up the seconds indicator. At the precise time the minute you set before begins, hit the 12-24 Hr. button, and the indicator goes back to zero and begins ticing away. Then hit the Mode button again until the watch is in the current time mode. Hope this helps. I use Internet time to set a precise time.

Jul 17, 2009 | Casio Watches

3 Answers

Citizen Skyhawk Time Adjustment Problem


It is possible to set the main analogue hour and minute hand 30 minutes out of phase with the digital readout, but doing so will also put the analogue UTC dial 30 minutes off. It can be done by using a variation of the proceedure for zeroing the watch hands as follows: 1. Rotate the crown in its normal opering position to set the watch in chronograph mode (mode dial pointing to "chr") 2. Pull out the crown to the second click. This should cause all the hands on the watch to return to zero. "HR" should appear on the left-hand digital display. This will allow you to move the hour hand by twisting the crown. Advance it to about half way between the 12 o'clock and 1 o'clock positions. 3. Press the top button. "MIN" should appear in the left-hand digital display. This allows you to adjust the minute hand. Twist the crown to advance it to the 6 o'clock, or 30 minute, position. Note that this will also move the minute hand on the small UTC dial to the 30 minute position. 4. Press the crown back into its normal position. 5. Reset the digital time and date according to a time zone that is in a one-hour offset from UTC. This is not a perfect solution. Your digital readings will show the correct time for all one-hour offset time zones while your analogue nads are 30 minutes out of phase. Your small UTC dial will also be 30 minutes out of phase with the digital UTC. Hope this helps.

May 28, 2007 | Citizen Skyhawk Eco-Drive JR306059F Wrist...

1 Answer

Casio Edifice Watch


Here is a link to the manual: http://ftp.casio.co.jp/pub/world_manual/wat/en/qw1310.pdf It says: Hold do the (A) button [the upper-right button] to advance the analog time setting. The analog time will adjust forward at high speed. It only goes forward, so if you miss the proper time, you have to go all the way around again.

Mar 12, 2007 | Casio GW1310A-4AV Wrist Watch

Not finding what you are looking for?
Watches Logo

Related Topics:

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pulsar Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Kazim ERGUNEY
Kazim ERGUNEY

Level 3 Expert

577 Answers

lessaleadr

Level 1 Expert

29 Answers

Are you a Pulsar Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...