Question about Little Tikes Snug n Secure Swing, Pink

1 Answer

Problem with the uneven rope - Little Tikes Snug n Secure Swing, Pink

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 192 Answers

I had one of these too :)
It gets "out of balance" on occasion. You just have to look under the swing to make sure there are no kinks and guide the rope through the side that is the shortest while placing downward pressure on the swing. This should "even" it back out.

Posted on Mar 27, 2011

  • Whispis2
    Whispis2 Mar 27, 2011

    Oh, If this does not work because the ropes are hard. Slide the swing up the ropes while holding the ropes from underneath. Then guide the swing back down making sure it is level.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lawn mower rope pully repair


if rope to long then pull out recoil one turn hold rope tight pull knot out of handle down rope rope to were you are holding it tie a knot in rope slowly let rope go back in recoil then pull it all the way out should fit now cut off excess rope but also if you have a long rope it is suppose to mount on handle should be a mount hook for on the handle

Sep 05, 2014 | Garden

1 Answer

I cant pull the string to start the mower


pull plug out tie up bail handle see if you can turn engine over by hand if you can pull hard on rope it has jamed if not .move check for locked up mover add oil to cylinder for it to turn over till its free my have to take recoil off to do this if the reciol starter pawls or lock in

Aug 30, 2014 | Garden

1 Answer

Ignition/no spark on ford GT85 riding mower with a kohler M18QS gas engine. I need the electrical schematics for diagnostics.


follow this steps and fix it. GOD BLESS YOU
If grass is poorly or unevenly cut, try mowing at a slower speed and adjusting the engine speed with instructions in your owner's manual. Scrape away any dried grass and other debris caked under the mower deck. Sharpen or replace dull or bent blades 0fbc95da-10ce-4268-a804-bcc52ffe7dcf.jpg. Check and replace a worn belt.
If the V-belt slips or comes off during use, clear any debris in the belt area, adjust the drive-belt tension (see below), or have the belt replaced. Adjust and tighten pulley fasteners or have a service center replace worn parts.
If the belt squeals or wears excessively, adjust the drive-belt tension (see below) and look for obstructions around the belt. If that doesn't work, take the mower in for professional service.
If the mower vibrates excessively when the clutch is engaged, scrape away any debris accumulated under the deck. Balance the blade and replace the blade if needed. If that fails, adjust drive-belt tension (see below). If you find that the drive belt, pulley, or other belt-drive part is damaged, consider having it replaced by a professional.
If the mower is hard to shift or doesn't move when the clutch is engaged, adjust the drive-belt tension (see below). Also make sure the mower is lubricated according to the owner's manual specifications. As needed, have the mower serviced for damaged or maladjusted clutch/brake pedal linkage.
If the engine doesn't start, loses power, or dies during use.
Replace a recoil starter rope:
  1. Disconnect the spark plug cable for safety.
  2. Disengage the throttle cable from the housing and remove the housing as needed to access the starter.
  3. Remove the handle from the rope, which is often held in place by a knot or retainer pin.
  4. Unfasten the other end of the rope from the starter using pliers or a cutter as needed.
  5. Knot the end of the replacement rope.
  6. Tighten the pulley counterclockwise all the way, then back it off two turns and hold it firmly.
  7. Thread the unknotted rope end through the pulley hole.
  8. Thread the rope through the housing hole and pull it taut.
  9. Slowly release the pulley, allowing the rope to wind around the pulley.
  10. Attach the handle and reassemble as needed.
  11. Reconnect the spark plug cable.
Replace a recoil starter spring:
  1. Disconnect the spark plug cable for safety.
  2. Remove the housing and the spring cover.
  3. Carefully remove the rope from the pulley to release spring tension.
  4. Remove and replace the spring as recommended by the manufacturer.
  5. Reinstall the pulley, rope, and housing following the instructions above.
  6. Reconnect the spark plug cable.

Nov 12, 2013 | Garden

1 Answer

Are there different types of jump roping?


There is single rope, double dutch, wheel, and long rope. Single rope is when a jumper holds their own rope and performs to music. Double dutch is with a team of 3+ people turning 2 ropes opposite to each other. Wheel jumping is where the jumpers hold one handle of their own rope and one of another jumper's rope. Long rope is done with a long rope.

Jan 03, 2013 | Exercise & Fitness

2 Answers

Are there different names for jump roping?


Jump Roping can also be called skipping, rope skipping, or rope jumping. Skipping rope is generally the British way to say it, while Americans say Jumping rope.

Jan 03, 2013 | Exercise & Fitness

1 Answer

Broken pull chord


Remove recoil assembly from top of engine. Observe recoil wheel and find knotted end of rope in wheel, Observe direction of rope wrapped around wheel, cut knot off wheel end of rope remove rope. Rope purchased by the foot at mower repair shop. Feed new rope end into hole in recoil wheel wrap around in correct direction, feed rope thru recoil cover, remove old rope from handle, feed new rope thru handle to proper length, Knot rope to stay in handle.

May 14, 2012 | Toro Power Lawn Mower

1 Answer

How to install pull rope on Craftsman 917.37717 lawn mower


First, this is best done with two people, unless you have 4 hands. Second, with rope pull cover off the mower and laying on table with rope pulley up so you can see it, remove all the old rope. Next, measure 8 foot of new rope.
Now, line up the holes where rope will go thru the cover and into pulley, now with someone holding the cover, rotate rope pulley 6 complete turns, now hold pulley there, while putting new rope thru the rope openings in rope pulley and outer cover. Tie knot on end by rope pulley and have who ever was holding cover and other end of rope, slowly release the rope so it rewinds, install rope handle and walla, your done. 5 minute job, depending on how much coffee you drink. Hope this helped you.

May 28, 2010 | Craftsman Garden

1 Answer

How to replace coil string


This is best done with two people. Remove cover, place down so you are viewing the rope pulley. Remove all old rope. Measure 8 foot of new rope. line up pulley rope hole with rope opening in cover. Wind rope pulley 6 turns. Push new rope thru both rope openings, one in pulley and one in cover. Pull rope thru pulley and cover. Tie knot in pulley end of rope, Slowely release rope so it rewinds onto pulley. Install hope handle, your done. was'nt that easy? You will have extra rope, this is needed to go from engine to handle support on your mower handle.

May 28, 2010 | Yard Machines 158cc Push Lawn Mower #11a...

1 Answer

Uneven cutting height


Hi Matt,

Thanks for the update. Good ole brainstormin' comes through again!

Charlie

May 07, 2009 | Craftsman 21 hp 42 in. Deck Yard Tractor -...

Not finding what you are looking for?
Little Tikes Snug n Secure Swing, Pink Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Little Tikes Toys Experts

 Russ Hill
Russ Hill

Level 3 Expert

3187 Answers

Brett Duxbury
Brett Duxbury

Level 3 Expert

3497 Answers

Bill Boyd

Level 3 Expert

42108 Answers

Are you a Little Tikes Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...