Question about Computers & Internet

3 Answers

I can't figure out how to change from right hand click to left hand. Please tell me how to do it. thanks

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Windows XP
1 Close all applications and programs. This is always recommended when you are altering system or device settings.

2 Hit the "Start" button in the bottom left corner of your desktop.

3 Scroll up and click "Control Panel."

4 Select "Printers and other hardware" and then "Mouse."

5 Select "Button Actions." With the drop-down menus, switch the left button to "Right" and right button to "Left." Hit the "Apply" button and hit the "OK" button. Close all windows.

Windows Vista
1 Close all applications and programs. This is always recommended when you are altering system or device settings.

2 Hit the "Start" button in the bottom left corner of your desktop.

3 Scroll up and click "Control Panel."

4 Click the "Mouse" icon. Click the "Buttons" tab.

5 Put a check mark in the box next to "Switch primary and secondary buttons."

6 Click the "Apply" button and then the "OK" button. Close all windows.

Windows 7
1 Close all applications and programs. This is always recommended when you are altering system or device settings.

2 Hit the "Start" button in the bottom left corner of your desktop.

3 Type "mouse" (without the quotes) in the search box that appears.

4 Select "Change Mouse Settings."

5 Put a check mark in the box next to "Switch primary and secondary buttons."

6 Click the "Apply" button and then the "OK" button. Close all windows.

Posted on Mar 27, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,381 Answers

Hello ddie16
Go to :
Start \ Control Panel \ Mouse \ buttons and check " switch primary and secundary buttons " .
Best regards
fanaudi

Posted on Mar 27, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 822 Answers

Start run control panel mouse/ buttons/ configuration
press ok............
cheers

Posted on Mar 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I registered my gmail account I was in Ecuador, so everything is in Spanish..can you please tell me how to put everything in English on my gmail account.


If your Gmail interface is in the wrong language, take these steps to fix the problem:
  1. Sign in to Gmail.
  2. Click the gear in the top right.
  3. Select Settings.
  4. Click on the language dropdown menu, the top entry on the first tab.
  5. Select your language.
  6. At the bottom of the page, click the right-hand button to save your changes. If your language has been set to a right-to-left language like Hebrew or Arabic you'll need to click the left-hand button.
  7. In the window that pops up, click the right-hand button to apply this language choice to all of your Google products. Clicking the other button will apply this change to Gmail only. In Hebrew or Arabic, you'll need to click the left-hand button to apply to all.
Good luck dear!

Aug 25, 2013 | Computers & Internet

1 Answer

Can a compaq mouse is converted from right hand to left hand?


Dotti

get into the control panel, and click on the mouse and keyboard icon.
Then click on the hardware and sound icon. Right click on the mouse icon and you will be able to change the mouse settings.

Aug 08, 2012 | Compaq Computers & Internet

2 Answers

The icons and all display items are spread out, like 50% bigger than normal. Can't figure out how to fix. Many thanks!


Hi,

Open Display Settings by clicking the Start button (orb), click on Control Panel, click on Appearance and Personalization, click on Personalization, and then click on Display Settings.

Under Resolution, move the slider to the resolution you want, and then click Apply.




Regards.

Jan 08, 2010 | HP Pavilion tx1000z Notebook

2 Answers

I have a new HP7900 tower, with aHP mouse. I have


Hello If your using Windows software (xp , vista) open controll panel and then right click and open the mouse icon.Under the buttons tab you can choose right or left hand operation.Be sure to click apply at the bottom of the box before you close it.

Dec 10, 2009 | Office Equipment & Supplies

1 Answer

Reset watch


Hi

Thanks for using FixYa. You can set the time on your accurist watch by following this procedure--

TIME SETTING--

1. Push the bottom right hand button until the mode hand indicator points to TME.
2. Press and hold the upper left button for three seconds. The hour and minute hand will retract to the 12 O’clock position.
3. Select the time zone on the digital display by pressing the upper right button or the lower left button.
4. Pull the bottom right button out one click. The bottom part of the digital display will start flashing. Press the bottom left button to adjust for daylight saving time.
5. Press the upper right button. You will see the seconds flashing on the lower half of the digital display. Press the lower left button to reset the seconds to 00.
6. Press the upper right button. You will see the minutes flashing. Press the lower left button to set the minutes to your current time.
7. Press the upper right button. You will see the hours flashing. Press the lower left button to set the hours to your current time.
8. Press the upper right button. You will see 12H or 24H flashing. Press the lower left button to switch between 12 hour and 24 hour.
9. Push the lower right button back in.

SET THE CALENDAR--

1. Push the bottom right hand button until the mode hand indicator points to CAL.
2. Press and hold the upper left button for three seconds. The hour and minute hand will retract to the 12 O’clock position.
3. Select the time zone on the digital display by pressing the upper right button or the lower left button.
4. Pull the bottom right button out one click. You will see the month flashing on the digital display. Press the lower left button to change the month.
5. Press the upper right button and the date will begin flashing. Press the lower left button to change the date.
6. Press the upper right button. You will see the year flashing. Press the lower left button to change the year.
7. Push the lower right button back in.

Please do accept the solution if the issue is resolved or else revert for further assistance.

Thanks
Rylee

Aug 31, 2009 | Watches

1 Answer

Link in excel 2007


right click on any cell then select hyperlink option from the list then a dialog box will appear infront of you
in left hand side pane there is option place in this document click on that then in right hand side pane select sheet 2 or sheet 3 whichever you want...
or if you want to open any other file so use existing file...option

Jul 01, 2009 | Computers & Internet

1 Answer

Logitech mouse installed, set left/right incorrectly


If you still have the disk for it you can reinstall the driver by going to the Control Panel > Printer and Other Hardware > Mouse > Hardware (Tab) > (Select Your Mouse) > Properties > Driver(Tab) > Uninstall. After uninstalling put the disk and install the driver.

Aug 08, 2008 | Logitech Computers & Internet

2 Answers

Yesterday, when I powered up my laptop, everything was all of a sudden enlarged ( the desktp, icons, internet, text, e-mails, EVERYTHING). I know this is probably supposed to be some kind of useful tool...


Hi,

Your enlarged desktop could be caused by several different things, so I will address each one in the order of likelihood of each one:

1. You may have accidentally changed your Display Settings.

Right-click on your desktop and select Personalize. Scroll down and click on Display Settings. Ensure that your Monitor Resolution is set for the maximum. If not, use your mouse to move the slider bar all the way to the right.

2. You may have accidentally changed the size of text and icons.

Right-click on your desktop and select Personalize. In the bottom left-hand corner, select Ease of Access. About half way down the screen, select Make the computer easier to see. Click on Change the size of text and icons about half way down the screen. If it is not selected, chose the default scale.

3. You may have accidentally turned on the Magnifier.

Right-click on your desktop and select Personalize. In the bottom left-hand corner, select Ease of Access. About half way down the screen, select Make the computer easier to see. About half way down the screen, uncheck the Turn on Magnifier.

To turn off the On-Screen Keyboard on start-up,
right-click on your desktop and select Personalize. In the bottom left-hand corner, select Ease of Access. About half way down, select Use the computer without a mouse or keyboard. Unselect Use On-Screen Keyboard.

To turn off the Narrator on start-up, right-click on your desktop and select Personalize. In the bottom left-hand corner, select Ease of Access. About a third of the way down, select Use the computer without a display. Unselect Turn on Narrator.

I hope this helps. If so, please remember to rate my post.

Thanks!

Jul 27, 2008 | HP Computers & Internet

1 Answer

Setting instruction for Accurist world time wrist watch


Same just happened to me, performthe following:

The analogue hands are not precisely synchronised with
the digital time?

1. Press the lower right button to move the mode indicator
hand to CHR.
2. Pull the lower right button out one click. The hour, minute
and UTC hands will retract towards the straight up 12 O’clock
position. You will see UTC on the top half of the digital display.
3. Press the upper right button to advance the hands to the
straight up 24-hour position. Use the lower left button to go in
reverse.
4. Press the upper left button. You will see HR on the top half
of the digital display. Press the upper right button to advance
the hour and 24-hour hand clockwise until they both point
straight up at the 24-hour position. Use the lower left button to
move the hand anti-clockwise.
5. Press the upper left button. You will see MIN on the top half
of the digital display. Press the upper right button to advance
the minute hand clockwise or the lower left button to move
anti-clockwise until it is pointing straight up at the 12 O’clock
position.
6. Push the lower right button back in one click.
The watch malfunctions in some way and the above
procedures do not work.
1. Press the lower right button until the mode indicator hand
points to TME.
2. Pull the lower right button out one click. Press the other
three buttons down simultaneously for three seconds and
release. You will see 8’s on the digital display.
3. Press the upper left button. You will see UTC on the top half
of the digital display. Press the upper right button to advance
the hands of the top dial to the straight up 24-hour position.
Use the lower left button to go in reverse.
4. Press the upper left button. You will see HR on the top half
of the digital display. Press the upper right button to advance
the hour and 24-hour hand clockwise until they both point
straight up at the 24-hour position. Use the lower left button to
move the hand anti-clockwise.
5. Press the upper left button. You will see MIN on the top half
of the digital display. Press the upper right button to advance
the minute hand clockwise or the lower left button to move
anti-clockwise until it is pointing straight up at the 12 O’clock
position.
6. Push the lower right button back in one click

Jul 06, 2008 | Watches

1 Answer

I can't figure out how to change get to the batteries on my logitech cordless mouse so i can change them.


Hi teresa - On your mouse you'll see the Logitech logo. A little away from the logo, towards the scroll wheel, you'll find some raised lines or grooves. I do this with one hand because my right hand's paralyzed. You can do it however you want. Here's how I do it: I use my left hand, ring and little finger on left side, thumb on right side of mouse. Take your index finger and gently yet firmly push on the raised lines and pull back away from the scroll wheel. The cover should come right off. I hope I described this well enough. Like I said I use one hand but I'm sure you'll get the jist. If this solved your problem PLEASE rate this as fixed. If you need more help just add a comment and I'll be happy to assist you further. Thanks.

Jeff

May 23, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...