Question about Computer Monitors

1 Answer

Screen says no video input

Fastinnerhtml!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Website uses a javascript, which calls the function FixInertTags.
Removed it from my own website and the problem dissappeared.

Posted on Aug 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dell 2407 Can't get rid of "No S-video input signal" message on screen. How do I get rid of this?


Your S-Video connection is referring to a round plug for a TV input signal. Most computers will not have this connection unless you have a TV based video card. If your using a TV 'monitor' as your computer's video device, their will either be a button on the monitor or your remote to allow you to choose the input signal. If you are using a VGA or HDMI or DVI cable as the connector between the two devices, most likely, the light is referring to one of these, as its video source. You will need to match the cable & monitor source detected to get a usable picture output.

Good luck.
Toby.

Sep 28, 2015 | Dell Computer Monitors

2 Answers

Computer screen keeps going black,,turn the monitor off and on,,screen come up for a bit,,the d sub appairs then gos black again


Hello there
You dont say which machine you have but a common problem is they are set for the WRONG input,
Have you checked using the 'onscreen' menu,of the monitor that you are looking at the right INPUT ???? D-sub is the 15 pin video cable input from your computer to the monitor. .It will go dark if you are not supplying a signal on that input.

Sep 24, 2014 | Computer Monitors

2 Answers

The screen is showing "No


check input output pins of tv or try to scan

May 04, 2011 | LG.Philips LCD LP150X05A2 Monitor

2 Answers

How do i switch my monitor to vga input?


Plug in the VGA cable to the monitor, and to the computer.

The monitor automatically determines which inputs have a valid signal source.

You can also set the monitor's source of video input to VGA, by going to the On Screen Display menu, and the Switch Video Input option.

Here is the User Manual,

http://h10032.www1.hp.com/ctg/Manual/c00834092.pdf

If you have questions post in a Comment.
We'll step by step you through it.

Regards,
joecoolvette

Dec 17, 2010 | HP w2207 Monitor

1 Answer

Black screen


Make sure power connection is connected and has power.
Make sure video cable is connected to the correct input.
Make sure you select the correct input source on the monitor menu.
Make sure you computer is on, has the correct video drivers and screen resolution.
If all this is good then have the monitor serviced or replace it.

Good luck

Oct 12, 2010 | ViewSonic VA1930WM LCD Monitor

1 Answer

Screen shows message "no input signal" and monitor goes to sleep.


monitor show "no input singnal" error masage when not gating any type of video singnal ,
so if u realy check your monitor wires for correctty plugged in .
then:-

Two possibilities:

either the video/mainboard of the monitor is defective; or
the video card/ CPU is the faulty.

A way to verify is to try the PC with another monitor or to try the monitor in another PC.

thanks

Apr 30, 2009 | HP vp17 Monitor

1 Answer

FLOATING BOX WITH ATTENTION INPUT NOT SUPPORTED


Your monitor has several different video inputs.
Go to the configuration settings on your monitor and select the video input that matches the video cable from your computer.

Nov 12, 2008 | Computer Monitors

1 Answer

170c lcd screen saying no video input


hey i relise you had this problem a while back but i am having the same problem, may i ask how you resolved this problem?
regards
adam

Jun 11, 2008 | Philips 170C4FS 17" LCD Monitor

1 Answer

Focus on monitor


Try replacing the filter capacitors on the video circuit.

Apr 28, 2008 | Samsung SyncMaster 753S 17" CRT Monitor

1 Answer

Screen prob.


For flat panel systems there are 2 inputs. DVI using the white cable and VGA. by default flat panels are set to DVI input. hit the menu button on the screen and there should be an option there to change the input video. if this will not work it could be a problem on the video port on your acer computer or it could you might need a new VGA cable.

Oct 11, 2007 | Dell E172FP 17" LCD Flat Panel Monitor

Not finding what you are looking for?
Computer Monitors Logo

Related Topics:

675 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computer Monitors Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...