Question about Keurig B60 Coffee Maker
1.Power off machine.
2.Using a metal paperclip, insert it into left side of top needle. It must insert at least 1" deep.Insert it into slot on right side and again from back of needle.
3.Remove KCup cradle.Separate bottom from top.In the top section, insert the paperclip up into bottom needle from the bottom upwards.It will not go all the way thru and this is normal.
4.Reassemble KCup cradle and reinsert it back into coffee maker.
5.Power on machine.
6.Brew a cup of water only.There may be coffee grounds in the water and these should eventually clear during the remaining steps.NOTE: A large cup brew cycle should output a full 8 ounces (235cc).Less means there is still a blockage
7.Empty reservoir and fill with undiluted distilled white vinegar.Repeatedly run brewing cycle until Add Water light comes on.
8.Make sure Auto-OFF is NOT set and let last cycle of vinegar remain inside machine for 4 hours.
9.Refill reservoir with fresh water and repeatedly run brewing cycle until the water is clear and odorless.
10.Set Auto-OFF, if preferred.
Posted on Mar 29, 2011
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jul 13, 2017 | Coffee Makers & Espresso Machines
Sep 25, 2011 | Keurig B60 Coffee Maker
Aug 12, 2011 | Keurig Special Edition B60 Coffee Maker
Jul 23, 2011 | Keurig Platinum B70 Coffee Maker
Jun 30, 2011 | Keurig B50 Coffee Maker
Jun 16, 2011 | Keurig B60 Coffee Maker
Jun 16, 2011 | Keurig Platinum B70 Coffee Maker
May 16, 2011 | Keurig B70 Coffee Maker
May 14, 2011 | Keurig Platinum B70 Coffee Maker
Mar 17, 2011 | Keurig B60 Coffee Maker
296 people viewed this question
Usually answered in minutes!