Question about Televison & Video

Open Question

My Vivo LTV47FHD will not turn on. the standby light is flashing blue & red. what should I do?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

experttv
  • 203 Answers

SOURCE: Sony KV34XBR800 Red Flashing Standby Light No Power

The red light should be blinking a code. For example it will blink 4 times pause then 4 times pause or 5times pause 5 times pause, whatever the error might be. Let me know what it is and then we can help more.

Tim
Experttv@comcast.net

Posted on Sep 11, 2008

  • 1039 Answers

SOURCE: 13 red standby flashing lights -- turns on, then turns off

Are you sure about the 13 flashes. Error code only goes to 8 flashes.

Posted on Apr 26, 2009

SOURCE: WONT TURN ON

Most likely, the problem is a defective Main Processor Board. This is the board with the antenna, RCA and HDMI plugs. You cant repair or replace component parts on this board, so dont even try. You must replace the complete board. The TV says Sylvania, but it is a bloody Funia TV. Several years ago this foreign company bought out broke-azzz Sylvania . They are still carrying the Sylvania name since Sylvania was a popular TV name in the 70s. Every electronic company in the USA is now owned by the Chinese, so call Funai and order the part from them. Dont be surprise if they dont have a clue what the heck you asking for. America and all electronics have gone to the puddles. Do you know why? GREED.

Posted on Jun 10, 2009

jerryg50
  • 1667 Answers

SOURCE: the red standby light flashes and when the power

One of the boards (module) has a short on it, and or the power supply itself is failing.
The service center will find the fault using the process if elimination. They will replace the bad boards or modules as required to get the set working again.

Jerry G.

Posted on Dec 16, 2009

  • 2 Answers

SOURCE: Technika lcd32-207 is stuck in standby. Blue standby light dims.

Hi brendafoud, have you had this fixed as mine is the same and has been for months. It happened just after the warranty had ran out(typical). Bought from ebay and the people I got it from are not very helpfull. Have you got yours fixed yet?

Posted on May 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My vivo TV won't turn on and red light blinking...no remote control


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.

Nov 04, 2016 | Televison & Video

1 Answer

To wont turn on. Blue and red light keep flashing.


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Oct 05, 2016 | Hitachi Televison & Video

1 Answer

Gvaled32d tv flashes red and blue in standby shows logo than flashes


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
http://electro-medical.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.....

Apr 29, 2016 | Televison & Video

1 Answer

My Baird jo47 won't turn on and the standby red is flashing with sound what is the problem


My baird JO47 tv is stuck on standby - Digital TV - Streaming ...

www.tomsguide.com/forum/55998-4-baird-jo47-stuck-standby

Dec 17, 2012 - 4 posts - ‎2 authors
My Baird JO47 tv is stuck on standby and won't come off. ... I have a panasonic 50" TV it will not turn on no green light or standby red light ... Forum; my tv standby light keeps flashing blue on and off and won't switch on Forum ...

Baird JO47 Stuck on Standby ' Electronics Forum (Circuits ...


Dec 15, 2015 | Televison & Video

1 Answer

Bluetooth wont charge or power on. when charging the red light comes on. once disconnected from charger it wont come on


Indicator Lights:
1.Headset Status Headset Indicator Light
2.Powering on Steady blue, then intermittent flashes
(changes to standby mode)
3.Powering off Red appears and goes off
4.Standby Blue intermittent flashes
5.Charging battery Red solid light. Light indicator turns off when
battery is fully charged and headset is off.
6.Low battery Triple red flashes
7.Pairing mode Blue/red alternating flashes
8.Missed call Purple flashes. Press the call control button
to cancel flashing light.
9.Incoming call Triple blue flashes when ringing.
Power on and off:
1.Turn on the headset Press and hold the call control button until the
indicator glows blue. You will hear ascending
tones.
2.Turn off the headset Press and hold the call control button until the
indicator glows red. You will hear descending
tones. When power is off, indicator stays off.
If none of this is helpful then it may be that your battery is dead, if that is the case then you will need to replace the whole headset. The battery's are not replaceable.

Good luck from Headsets Direct!

Sep 21, 2011 | Plantronics Explorer 220 Bluetooth Headset...

1 Answer

What is the pairing security code for xx3 plantronics


The following are detail instructions on how to Pair (sync) a Plantronics Bluetooth Headset to your Bluetooth Cell Phone:

1 - You need to go into the device you wish to pair it and turn the Bluetooth feature first.

2 - Then you need to place the headset in pairing mode so your phone will find it.

Find your model headset in the instructions below. Once the headset is in "Pairing" mode you will then need to follow the instructions in your cell phone or Bluetooth device's user guide on how to go it to your phone and search for the headset & pair it to a Bluetooth headset.

The passkey is 0000 (4 Zeros) except models M1000 and M1500 (see below for their number )

For the Plantronics M3000/M3500 (discontinued):

Pressing and holding down the volume up key and the talk button at the same time. Hold them in together until the indicator light on the headset starts flashing red then green.

For the Plantronics 510 Voyager:

510_small.jpg

Pressing and holding down the call control button and holding down the volume up at the same time until the indicator light on the headset starts flashing red then blue.

320_128.jpgexpl330_128_blue_pop.jpg340_small.jpg

Plantronics Explorer 320,330,340 & 350

Begin with the headset turned off. Press and hold down the silver call control button in for 6-10 seconds. The light will flash blue first. Continue to hold the button down then release the button when the indicator light starts flashing red then blue.

dis655_128_blue_pop.jpg 665_small.jpg

Plantronics 655, 665

Begin with the headset turned off. Press and hold down the silver call control button in for 6-10 seconds. The light will flash blue first. Continue to hold the button down then release the button when the indicator light starts flashing red then blue.



discovery645_small.jpg

Plantronics Discovery 640, 645, 640e

Begin with the headset turned off. Press and hold down the silver call control button in for 6-10 seconds. The light will flash blue first. Continue to hold the button down then release the button when the indicator light starts flashing red then blue.

plantronics-590a_small.jpg

Plantronics Pulsar 590/590e & 590A & a Bluetooth device:

Begin with the headset turned off. Press and hold the call control button then power the headset on and when the indicator light flashes red and blue, release the call control button. Once the headset is paired successfully the headset will flash blue.

pulsaradapter.jpgFor the Plantronics Pulsar 590 & 590A & the Universal Adapter: Begin with the headset turned off. Press and hold the call control button. Power the headset on and when the indicator light flashes red and blue, release the call control button. Turn the Universal Adapter on. Press and hold the adapter pairing/connect button for 7-10 seconds. When adapter starts flashing red and blue release the buttons. The headset and adapter will flash blue when paired successfully.

pulsar_260_128.jpgPlantronics Pulsar 260

For the Plantronics Pulsar 260, Begin with pendant powered on.

Press and hold both the mute/play/pause button and the power on/off/pairing button simultaneously. When the
indicator light flashes red and blue, release buttons. While pendant is flashing red and blue, use the phone menu to search for Bluetooth devices and select "260 Plantronics." When prompted for passkey,
enter 0000.

m2500.gif
For the Plantronics M2500 (discontinued):

Start with the headset powered on. Press and hold down the call control button while also rotating the multi function dial upward (away from the light) until the indicator light on the headset starts flashing red then green. When prompted for passkey, enter 0000.
m1000.jpg
For the Plantronics M1000 (discontinued):

Hit and hold the volume/mute switch in until the indication light starts blinking.

m1500.jpg
For the Plantronics M1500 & A500 adapter (discontinued): Turn the headset on and the adapter off. On the headset push in and hold the mute/volume dial until the indicator light begins to flash. On the adapter press and hold the blue power button for 10 seconds. The light on the adapter will flash once after 3 seconds- continue to hold the power button for another-7 seconds until the light flashes red. If the pairing is successful, the headset will sound a tone and both the headset and adapter lights will turn off.

For both the Plantronics M1000/M1500 (discontinued): If you remove the battery cover from the headset and then remove the battery itself. On the Green PC board itself there will be a letter followed by 4 numbers. These 4 numbers are your personal PIN code.

You can also use the Plantronics Bluetooth Pairing Guide

Feb 05, 2011 | Cell Phones

1 Answer

My standby light flashes red/blue? and no pic,its only weeks old


I would take it back and get a replacement, it is a lemon, it will void warranty if you open it up. It can be defctive power supply module.

Dec 09, 2009 | Goodmans GTVL32W27HDF 32 in. LCD TV

1 Answer

TV turns on for a split second then back to standyby


i think your capacitor is blown, do a google search for insignia, lcd, capacitor...
you can buy another one for about $2 but its a pain to install, you can also instead buy a new powerboard for about $80, its an east install and you wont blow more capacitors
bestbuy.partssearch.com

May 09, 2008 | Insignia IS-LCDTV32 32 in. Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Cindy Wells

Level 3 Expert

5096 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...