Question about Walkera Toys

1 Answer

I need to know what brushless motor will work for a walkera 52 heli

Posted by on

  • chad allen Mar 27, 2011

    do i need to get a bl esc, because the motor that was in it is brushed.And can i use the same brass gear from the old one?

  • chad allen Mar 27, 2011

    yes this was very helpful,thankyou very much.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,555 Answers

I'm providing you a link below for the motor which is available for 19$ online suitable for your heli.
http://www.hobby-wing.com/hm-68b-z-38.html

Posted on Mar 27, 2011

  • Aruna Singh
    Aruna Singh Mar 27, 2011

    Pardon me but the motor I suggested is brushless not brushed. and yes you can use your old brass gears and you don't need to buy nothing else.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Problem to connect walkera cb100 esc controller connector


there are only 3 combinations on connecting esc to brushless motor. if nothing indicated on wires you can try each combinations of 3 wire by keeping 1 wire choosen and trying rest 2 wires. dont worry you wont burn anything. only motor runs on other way.or it wont move but makes noise.

Nov 18, 2011 | Toys

1 Answer

Generator wont work


The first thing to determine is if the unit is brushless type. If it has brushes, the rectifier module MIGHT be a problem, but more likely is the field has lost its remaining magnetism and needs to be "flashed".

HOWEVER if it is brushless, the field there would require special methods to restart. Search google for brushless generator problem and look for method using series light bulbs and utility power.

NOTE. sometimes a short inadvertently placed on the brushless units will pop the roatating diodes which then must be replaced.

Mar 24, 2010 | Electrical Supplies

1 Answer

Have a 5#10. Even on full battery the tail wobbles left to right and the heli rotates right continually even when trimmed fully to the left - can you help?


REMOVE CONTROL HORNS AND SET SERVOS TO CENTER POSITION WITH RADIO AND RECONECT HORNS TO SERVOS ,COULD HAVE SLIPPED ON SERVO SPLINES DUE TO A HARD LANDING.

Jan 20, 2010 | Walkera HM5#10 RC Helicopter

1 Answer

I have bought 2 Walkera heli, and I have had problems with both, the RTF is not, the manual tells you little about it , The LI poly battery almost blew up and the other bat wont hold a charge, what do I...


Did the charger come with the helicopters? It sounds like the packs are being overcharged or charged at too high of a current. Lipo packs are more sensitive to charging and discharging than NiCD and NiMH packs. I got my first helicopter last year so I don't have as much experience with them as cars and trucks, but I will help if I can. I have a Venom Beacon that came RTF with a Lipo pack and charger and I have not had any problems. I would also suggest a Lipo sack to put the packs in while charging. It would keep them from catching fire if they would happen to explode. Good luck.

Jan 01, 2010 | Walkera Co Axial 5 8 Metal Head Dragonfly...

1 Answer

I recently bought a Walkera 43g heli with a 2801 2.4 Ghz transmitter. The servos chatter and the heli is unflyable and very unstable and near-impossible to hover. I am experienced enough to flyout other...


This sounds like low power on the receiver BEC or the transmitter battery power. Check the voltages and cell polarities. You should not be getting interference with the 2.4 G system. If this is not the problem then I would send it back.

Aug 17, 2009 | Toys

1 Answer

Walkera 37 remote heli


Swap over the two wires that go from the motor to the speed controller. NB. don't swap over the wires at the battery this will destroy the speed controller.

Feb 25, 2009 | Walkera Dragonfly #68 7 Channel 3D...

Not finding what you are looking for?
Toys Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Walkera Toys Experts

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

16174 Answers

Are you a Walkera Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...