Question about Samsung Audio Players & Recorders
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The last problem is probably because you have not ?finalized? the DVD yet. Basically what that does is modify how the data is stored on the DVD so that a normal DVD player can read it. It also prevents you from modifying or recording to the disk any more so make sure you?re done before performing this. The part about the freezing is more complex, are these commercially recorded DVDs or something someone else recorded?
Posted on Jan 01, 2007
It is most likely that the laser is not a problem because it can read the first part of the disk. If the laser is defective, it willn ot recognize the disk. The problem is probably the seek mechanism. It can only access the inner tracks but cannot read the tracks further from the center.
Posted on May 24, 2007
first thing i would do i clean the lens with 90% isoprople alcohol and a q-tip, if that doesn't work watch the laser eye again and the movement is the laser look like it tries to catch up???
i would put a dc volt meter on the motor and the motor should stay at lower voltage if it climbs then there is something with the rails or worm gear. let me know what you find out.
Posted on Jan 04, 2008
This is a common problem on CD and DVD players.
Altini is correct to a point. You can try taking the top case off, removing the DVD drive and taking the top off of the drive. Then use a q-tip on the laser lense. I use a little squirt of windex on the q-tip. Gently clean the lense even if it doesn't look dirty. Make sure you very gently work the lense up and down through it's travel. This will make sure no dust or dirt is interfering with the lense focusing.
Reassemble and try your movies again. This is a 50 50 proposition. If you still have the same problem, the mechanism has likely gone bad. Time for a new DVD player.
Posted on Feb 14, 2008
Tips for a great answer:
Mar 30, 2013 | Samsung BD-C6900 Blu-ray 3D Player
Dec 08, 2011 | Samsung DVD-1080P9 DVD Player
Mar 02, 2010 | Samsung DVD-1080P9 DVD Player
Feb 14, 2010 | Samsung DVD-1080P9 DVD Player
Dec 26, 2009 | Samsung DVD-F1080 DVD Player
May 19, 2008 | Samsung Televison & Video
May 24, 2007 | Samsung HTDM150 System
Oct 09, 2006 | Toshiba SD-V392 DVD Player/VCR
153 people viewed this question
Usually answered in minutes!