Question about Washing Machines
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: I KEEP GETTING A dE
you will need to replace the door sensor, this error will appear until it has been replaced. it is inside the unit and pretty much hard to get to if your not familiar with workin on it. take it to an LG tech or some one whos familiar with it..........
good luck LG's are very sensitive.
email@example.com for more info.
Posted on Dec 15, 2008
Turn the water valves off and then unhook the water supply hoses from the machine. Look into the hole the hoses were connected to. Use a pliers to grab the tab on the filter screen(s) and pull them out of the water fill valve(s). Clean, reinstall, and reconnect hoses and turn valves back on. Most often you will find that the cold water supply is the culprit.
Posted on Feb 02, 2009
There sure should be....why, because mine stopped working as well. Found magnet inside machine after getting rid of water on spin cycle (thankfully it still allows the water drain to occur). Put magnet back on and hey presto, all good.....if only I had taped it on as 5-6 washes later and it has fallen off and I can't find it - hopefully a standard magnet will be enough to fix from shops - I am sure LG or proper repair place sells them for a fortune :(
Posted on Aug 07, 2010
SOURCE: my LG WF-TH700 washing Machines
This error code can sometimes also be shown as de or lid on the display. this error code is telling you that the lid switch may be faulty or that the ecu / electronic controle unit is bad and needs to be repaired so i would first have the lid switch checked and replaced if faulty also have the ecu checked and replaced if found bad .
also 1 thing you can try is to make sure the machine is empty and run a cycle like you would normally would and see if it reoccurs if it does than you will know it is one of the 2 that i mentioned but if it does not than you have a problem in the balancing or load sensor ok?
Hope this is very helpful for you
est regards Mike
Posted on Sep 26, 2010
SOURCE: my machine lg top loader
this means door error there is a magnet in the lid that falls of and this is how the computer knows the lid is shut lg dont sell the magnet you have to replace the whole lid sorry.
Posted on Jan 11, 2011
Tips for a great answer:
Jan 21, 2013 | Washing Machines
Nov 28, 2012 | Washing Machines
Nov 21, 2012 | LG Washing Machines
Feb 21, 2011 | Washing Machines
Nov 29, 2010 | LG Washing Machines
Nov 11, 2010 | Washing Machines
Jul 04, 2010 | LG WFT1071TP Top Load Washer
Apr 10, 2010 | LG Washing Machines
Feb 02, 2009 | LG WFT1071TP Top Load Washer
101 people viewed this question
Usually answered in minutes!