Question about Azza 845G-MLT Intel 845G mATX Motherboard (59823)

1 Answer

P4X4-ALH MOTHERBOARD CAN I PLEASE GET A PICTURE OF THE PANEL SETTINGS ON THE BOARD ITSELF I HAVENT DONE THIS IN WHILE

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,351 Answers

You can download the manual from here:
http://www.elhvb.com/mobokive/Archive/Azza/manual/UM-P4X4-ALH-E1(3).pdf

P4X4-ALH MOTHERBOARD - 2cf8a34.jpg 91b9251.jpg PW= Power On/Off and Suspend Switch Connector
SL = Sleep LED Connector
HL = HDD LED Connector
RS = Reset Button Connector

Did this help calgary12?

Good luck!

Mike

Posted on Aug 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our picture suddenly changed drastically from a clear sharp picture to a blurry, faded looking picture. Some colors are extremely bright, others are faded out. It is so bad it is not viewable.


Please check the flat cable connections between TCON board and the LCD panel. If this is ok, then it is either the TCON board or the LCD panel itself. Good luck.

Jan 02, 2014 | Samsung LA Televison & Video

1 Answer

55HDX99 picture is getting darker and darker. Have adjusted settings but no improvement. It's 4 years old and has probably less than 7000hrs.


I would try that if available but suspect a bad board somewhere in the set--average life on all Plasma sets is 3-5 years so maybe time to upgrade to a new set?

May 30, 2012 | Hitachi 55HDX99 55 in. Plasma HDTV

2 Answers

My 52 ince screen stopped showing picture. It is just red, or yellow or green with thin vertical lines. I can hear that the channels are changing but no picture. Is there a reset button or something?


Hi,
To reset the tv to factory/ default settings, please follow below procedure.
Turn On the TV, while holding down Up Arrow on the remote control, press Power button on TV, tv will turn itself Off then back On again, release Up Arrow on remote control.
This procedure will reset all settings in tv to default settings.
Problem seems with lcd panel and I'm afraid it does not seems to get solved by resetting tv however try to reset tv by above said procedure.
Thanks.

Aug 04, 2011 | Sony BRAVIA KDL-52W3000 52 in. LCD...

1 Answer

Im wondering what best picture settings for samsung LE37R87


Take a look at www.televisioninfo.com. They test tvs and calibrate them beforehand to get the best performance. Picture settings are given in the review. If they havent tested your model, they may have tested a similar one.

May 18, 2011 | Samsung LN37A550P LCD TV

1 Answer

We just bought our Dynex 32" LCD HDTV and we finally got it plugged it in. The picture is terrible. it looks fuzzy. We changed the settings with the contrast to see if that would help, but it still...


Return the thing,get a new tv replacement.The tv itself have a problems.The tv Tuner signal board that the board on the tv itself that taking in the incomming broadcasting tv signal cable have problems.

Nov 07, 2010 | Dynex 32 in. LCD Flat-Panel HDTV

3 Answers

Mainboard won't start


If you havent tried already I would recommend you reset the BIOS, there is usually a jumper to clear BIOS you may need to check the manual. Also it could be a bad board.

Another thing I have found though is to clean the board itself with some rubbing alcohol right around the processor where there are some contacts there that can short and cause a problem. Lastly make sure all your connections are plugged in you may just want to reseat them all. Best of luck!

Sep 17, 2009 | Computers & Internet

2 Answers

Can't Fix FRONT PANEL HEADER on my Motherboard


Hi,

Here is a link to your motherboard manual:

D845PEBT2 Manual

Go to Page 33 for the Front Panel connections...with pictures. :-)

Thanks for using Fixya.

Jun 12, 2009 | Intel Desktop Board D845PEBT2 Motherboard

1 Answer

I need the settings for the front panel connectors.


just visit the following link which has the manual to your motherboard. download and look for front panel settings in the pdf file.
hope this helps

http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProductID=1065&DwnldID=15210&strOSs=109&OSFullName=Windows*%20XP%20Professional%20x64%20Edition&lang=eng

Apr 20, 2009 | Intel D845GVSR Motherboard

1 Answer

Cant send recieve picture messages


try send ytour self a picture message i would also talk to your service provider maby tou havent done your settings properly, hope this is some help to you! also some networks wont accept photo from other networks

Dec 28, 2008 | Samsung SGH-G800 Cellular Phone

Not finding what you are looking for?
Azza 845G-MLT Intel 845G mATX Motherboard (59823) Logo

Related Topics:

662 people viewed this question

Ask a Question

Usually answered in minutes!

Top Azza Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you an Azza Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...