Question about Kenmore PRO 24 in BuiltIn Dishwasher with Ultra Wash HE Filtration 13173

1 Answer

It sometimes run water on to floor . the drain is not kinked.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 118 Answers

First of all, you must check to make sure that the door is closing properly before you run it, and that nothing is sticking out, or trailing out of the door.

secondly you must never open the door during the running of the dishwasher.

check to make sure the drainage is clear of protrusions. use special dishwasher cleaning salt if you need to. to do that, you need to obtain the special salt and run the dishwasher empty, it cleans away all the junk blocking the drain.

additionally, the connections to and from your dishwasher could be faulty and or leaking. check the input and output water line connections on the dishwasher and their other ends as well.

Posted on Mar 26, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota 2008 highlander water on rear center passenger floor. A/C drain outside passenger side draining.Seems to puddle on rear floor when A/C is on high and recirculating fresh air. Any clue? problem?


For water to pool on the floor with AC on should indicate a plugged evap drain tube. The tube will have to be inspected for kinks and debris lodged in it. It may be draining some of the water but not enough.

Jul 09, 2015 | Toyota Cars & Trucks

1 Answer

Jeep grand cherokee larado 2001 water leaking into floor board causing rust and problems...


water on floor comes from 2 noteable areas one is a leaking heater radiator or hoses and second is the drain hose for the a/c is kinked broken or blocked. Sometimes in severe conditions leaves and dust build up in the plenum chamber ( that area with the grill in front of the windscreen and the drain hoses here rust out letting water into the cab. Most noticeable after rain

Jan 14, 2013 | Cars & Trucks

1 Answer

Ld signal won't drain


For the LD error please check for the following:


  • Check for kinked or clogged Drain Hose: Remove any obstructions in the drain hose / stand pipe / utility sink. Straighten the hose to remove any kinks. If the washer is unable to drain due to a kinked or restricted drain hose, the washer may not spin.
  • Check for Standpipe higher than 8 feet above the floor:The pump is not powerful enough to pump water to heights greater than 8ft. The water will remain in the basket.
  • Check for excessive suds in the washer: Drain pumps cannot drain suds out of the washer.
To clear the suds condition: Check the drain hose and make sure the hose is not plugged or kinked Press pause/cancel twice to clear the display Run the machine through a Rinse/Spin cycle using cold water, then a Normal cycle using cold water.

Note: Do NOT add any additional detergent. This will remove much of the remaining detergent held in the fabric. This step may have to be repeated to remove all the detergent.

Jan 16, 2011 | Maytag Bravos MTW6600T Top Load Washer

2 Answers

What does oe mean on my washing machine display


Hi,
"OE" code in your washer indicates a Drain error. This is because the washer is not fully drained within 10 minutes. You have to check whether there is a kink in your drain hose, ensure the filter is clean, the drain hose can become clogged with sludge, sometimes a hot wash with 1/2 a cup of vinegar will remove this sludge.
Thank you !!

May 23, 2010 | LG WM2487H Front Load Washer

1 Answer

Some water dripping on the bottom and freezes onthe bottom of the freezer and sometimes theres water on the floor.


The freezer drain is cloged.Drain is in the bottom of the freezer floor in the back you may have to remove back panel. Run wire or somthing down drain tube to clear clog.

May 16, 2010 | Freezers

1 Answer

HOW DOES THE EXCESS WATER DRAIN FROM THE BOTTOM ON THE DISPENSER. I DRIED UP ALL OF THE EXCESS WATER AND CAN NOT FIND ANY DRAIN HOLES FOR THE WATER TO DRAIN AWAY. WE HAVE MOISTURE ON THE FLOOR AT THE FRONT...


is the water coming from the water dispenser on the door or from inside the freezer ? if from the water on the door, there is no drain..if the water continues to drip from there, you have a "air leak" in the line somewhere. If the water comes from the freezer, there is always a drain line and hole there, sometimes it is behind a panel, but it is there usually covered with ice if it's dripping out onto your floor. You need to let that ice thaw and I use a small hose (6' long) that will fit in that drain hole,get it at a hardware store.. fill the hose with water and push or plaace it into that drain hole..blow that water into the drain hole so it will wash out what might be in there causing the blockage. This amount of water will go down into a catch pan (already there) and evaporate. Restart your refer and watch for it in a week or two if it's back, do it again or check the drain tube on the bottom back, for any kinks.

Oct 24, 2009 | GE (PSS26MSRSS) Side by Side Refrigerator

1 Answer

Front load waher will not drain


Hi, your washer water pump, could be burnt out, or clogged up, but first check drain hose for kink, remove back of machine, locate water pump, device that your drain hose are connected to, remove all hoses, pump from washer, and clean, sometimes foreign objects get into it, and prevent pump impeller from spinning, also check water pump winding (coil) with ohm tester, place tester lead, one on each terminal on pump (motor) if you hear beep sound, pump motor o/k, if not, pump burnt out, replace it, but first remove pump, and clean it. after cleaning replace pump, try machine. you could put drain hose, close to floor, into buck, and water will empty by gravity, if water is not emptying, that's evidence your water pump is block, small object (handkerchief, coins etc.) gets into them, from time to time, first clean your water pump, `and check for kink, in drain hoses. . always disconnect power, before attempting any repairs. good luck.

Aug 13, 2009 | Frigidaire ATF6000ES Front Load Washer

2 Answers

Floor mats soaked on passenger floor


IF you are leaking from the sunroof in the front passenger side, you can remove the A-pillar cover next to the windshield (right side from inside of car) with a hex wretch, which is under the little plastic cover) and make sure the tube connecting the sunroof rain drain on top is not kinked or broken or not connected. Simply pour some water slowly down the drain on top with the sunroof open to test it. My was "somehow"kinked and I was able to fix it. There is also a NHTSA service bulletin #SI-B51-30-08 for 2003 BMW X5. If the tubing is not the problem, I would call BMW dealer and see if they fix the problem because of the "recall". Good Luck!

Jun 22, 2009 | 2003 BMW 5 Series

1 Answer

Water collecting when using A/C


My first reaction is that it sounds like a plugged or partially plugged drain line. Clear the drain line by either blowing through it backwards (carefully) or using compressed air. In a worse case the line could be kinked or rotted. Make sure the drain can run freely into its destination. Sometimes the line will need to be disassembled to clean it.

Another cause of this can be static pressure imbalance on the fan...the drain trap should be equal to or just less than in height of the total static pressure of the fan in inches of water column so the water (condensate) is not held back by the fan pressure. Make sure your filter is clean, especially if you have pets.

Apr 20, 2009 | Coleman Heating & Cooling

1 Answer

I manually put water in my washer; water stuck inside


drain hose kinked or belt off pump . lower drain hose to floor if empties the pump is the problem

Apr 17, 2009 | Whirlpool Washing Machines

Not finding what you are looking for?
Kenmore PRO 24 in BuiltIn Dishwasher with Ultra Wash HE Filtration  13173 Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

Ken Johnston
Ken Johnston

Level 1 Expert

56 Answers

Fred Sops

Level 2 Expert

272 Answers

D. E. Hev

Level 3 Expert

1167 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...