Idk y it sent me to this i was hoping to get a new title but the radio i have is the p7700mp i keep gettin this error ao displayed on the led's when playing cd's only fm/am radio work, cd gets stuck and will not come out unless i pull the faceplate out put it back on then hit eject. if i put the cd back in it will most likely display it again and sometimes it will just play. can anyone make any suggestions....... im thinking ive just had it too long and maybe the lens is dusty or something but then again it does play most the time????? someone pls help
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This is a common error with these units when they get dusty from putting dirty disks inside the drive. Just go to your local staples and or walmart and get a 5 dollar disk player cleaning kit. It looks like a plain cd but has small fibers that come out of the bottom of the disc that clean the laser as it spins and tries to read it.
are you useing cd rewrights some cd players dont like them ? have you tryed a cd cleaner in it ? if not try that if it dont do the job your find the laser needs to be reset in side the cd player this sometime costs more that what the head unit is worth it might be cheaper to buy a new one . let me know how you get on
I read a solution on here where you disconnect the wiring harness for 30-60 mins. to release the power stored in the capacitors. It seemed to work for everyone. I don't know if you tried this for this amount of time or not. Also, have you used a cd cleaner disc? You laser eye may be dirty. Also, since you said it was an old, battered car, maybe the vibration is causing the unit to malfunction. Also, if the unit is installed at the incorrect angle in the dash, it can cause a problem. Hope this helps...
Did you check the fuse with a ohmmeter. fuses that small are realy hard to see... just check the continuity between the two termanils on the fuse, there should be continuity.
Check your fuse panel of your car or truck, maybe it poped a fuse there. Physically check the power input with a votimeter and see if you have your 12 volts to the unit.