Question about Lincoln Power Arc 5500 Generator/Welder

Open Question

Lincoln power arc 5500 not generating power to weld.

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: My Lincoln 135 mig welder suddenly doesn't have enough arc

check the diodes that there not short or open circuit you will need a meter with diode test..

Posted on Aug 10, 2009

johnjnail
  • 1702 Answers

SOURCE: I have a 125 lincoln

check you ground cable, try to strike and ark on the ground cable, if no ark test the ground circuit if the circuit is ok you will need to have the transformer tested and for that you need some specal tools.

Posted on Aug 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ranger 10,000 has low weld output and ac output


This is not a simple question. Take this magnificent machine to a service shop.

Aug 25, 2014 | Lincoln Electric Ranger 250 GXT AC/DC Arc...

1 Answer

I have a lincoln power arc 4000 it sat for several years in my shop i tried to use it, the motor runs but it has no power output on the generator side or the welder side. I let it run for about 10 minutes...


Not sure what the problem is but I have similar unit and the engine died. If you are interested in selling the unit/engine please email me at m_ramkiss@hotmail.con. My mobile is 1-868-366-9505.

Thanks Mike

Feb 26, 2011 | Lincoln Electric POWER ARC 5500 HONDA

1 Answer

HAVE A LINCOLN ARC 5000 WELDER MOTOR RUNS FINE BUT HAVE NO POWER TO WELD OR RUN ANY POWER EQUIPMENT


I know whats wrong licoln is a giant peice of **** i had this same thing happen to my ranger 8 look at your pc board 2 chips fell out ill bet on it

Oct 29, 2010 | Lincoln Electric Ranger Gxt 250 Amp...

1 Answer

My lincoln ranger 250 no weld output


sounds like the transformer winddings which generate the amperage for the arc are breaking down

Jul 03, 2010 | Lincoln Welding Tools

1 Answer

Welding in TIG mode. Weld for 10 minutes, stop


the unit will need to go in for service there is a control bord issue there 4 in the unit these boards have to be tested by Lincoln i have the same welder and what they will do is swap out the boards till the bad one found if the unit is not under warranty they can be expensive mine coast 500.00 for the 1 control board there is not a clear way to say it is a particular one do to there all inter linked as to functions. go to the web site and search for a service center in your area hope this helps

Jul 02, 2010 | Lincoln Electric Ranger Gxt 250 Amp...

2 Answers

I want to buy a power arc 5000 but i want to know about **** durability


The Power arc 5000 gen. is really durable. I have had mine now for 5 years and have had no problems with it I use it for all my power tools on job sites.

Mar 01, 2010 | Lincoln Electric POWER ARC 5500 HONDA

2 Answers

Want weld after i cut it off and restarted it moter runs no arc


push the reset button....im not sure where its located....but im sure you have one....

Jan 06, 2010 | Lincoln Electric POWER ARC 5500 HONDA

1 Answer

Will not generate or weld,was working ok last time it was running about 1 year ago.


It probably has lost all residual magnetic field from the rotor.

You may need to "flash" the field to restore operation.

Search Google for instructions. Sometimes others have found that plugging in an electric drill that does NOT have a throtling trigger and spinning it while connected to the generator will get the generation started again. There are other methods as well.

Oct 05, 2009 | Lincoln Power Arc 5500 Generator/Welder

Not finding what you are looking for?
Lincoln Power Arc 5500 Generator/Welder Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Welding Tools Experts

Steve

Level 3 Expert

3287 Answers

Brad Brown

Level 3 Expert

15557 Answers

joe2639

Level 1 Expert

10 Answers

Are you a Lincoln Welding Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...