Question about Computers & Internet

2 Answers

Asus P4B Motherboard

Post sequence does not recognize the keyboard..........

Message : Voice message "No Keyboard detected"

Screen message: Keyboard error or no Keyboard detected
CMOS checksum error - Defaults loaded
Press f1 to continue, Del to enter setup.

Posted by on

  • a_lie Apr 14, 2009

    I have some problem. but, when i press F1 or Del, my keyboard didnt respond. I'm use a keyboard mouse(because my PS/2 port have a problem). I'm try reboot, and when the P4B booting screen, i rapidly press Del. It is successed enter to the bios setup screen. But after that, i can't do anything anymore. My keyboard won't respond anymore. Can u help me?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 395 Answers

Press DEL to enter setup and set Reset to Defaults in Exit menu. If you have USB keyboard, make sure you enable Legacy USB and USB keyboard settings, save and exit and reboot.

Posted on Aug 08, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 1,006 Answers

Just buy new motherboard battery and problem is fixed

Posted on Aug 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a Dell PC and I unplugged the mouse and the keyboard temporarily to clean it. When I plugged them both back into the tower and turned on the computer, neither one worked. I tried to restart, shut...


To try to resolve the issue:
1.) Will a different keyboard and mouse work (PS2 is the name of these connections)
If they will, damage to the keyboard and mouse is likely)
2.) Will a usb mouse and keyboard work?
If they do, then the problem is with the controller on the mobo, unlikley but MAY have been casued by static.

If the USB keyboard and mouse do not work, you have some problems with the motherboard

Try switching off and unplugging the computer, remove the coin shaped BIOS battery and plug in the keyboard and mouse, wait 2 minutes or so and put the battery back, replug in and power on, see if the bios detects the keyboard and mouse (you will see the bios screen flash up a message). If the computer does nOT detect the keyboard and mouse it will (or should) flash a message on the screen saying "no PS2 keyboard or mouse detected".

If this fails to detect the mouse and keyboard and you get no message or beeps, then there may be damage to the connector ports.

If you can get a USB keyboard and mouse to work, use them, Effecting a repair to the motherboard will not be a viable option

Jan 25, 2011 | Dell Dimension XPS 400 PC Desktop

1 Answer

Asus P5RD-2-UM acpi bios revision 0811. Press del to run setup Press F8 for BBS popup initializing usb controllers..done. 992mb =32 mb shared memory avto detecting pri master ide hard disk pri master...


no keyboard detected. fatal error... system halted = your keyboard is dead, replace it. If you get the same message after a new keyboard then the PS2 connector is dead, you will have to use an USB keyboard.

Dec 20, 2010 | ASUS P5RD2-VM Motherboard

2 Answers

Keyboard error or no keyboard present, the


Have you tried to disable the PS2 keyboard and plugged in a USB keyboard..? You may have to go into the bios and switch on USB legacy support..

Nov 12, 2009 | ASUS P4B266 Motherboard

1 Answer

Could not detect HDD on my Asus P4B-M Motherboard


hi,

try removing with jumper behind the hard disk. and the see the cable or plugged in properly and do automatic detection of Hard drives in Bios

Dec 22, 2008 | ASUS P4B-M (P4BM1400WOLTINY) Motherboard

1 Answer

Asus M2N keyboard problem


You don't need a driver for a PS/2 keyboard nor a USB keyboard. The keyboard lights should lite up at post. After boot press the Caps Lock key and it will light the corresponding light on the keyboard if the controller works. If not it is the motherboard. If you are strapped for bucks get a mobo that can use the same cpu, RAM and drives. Good luck, Steve Medley

Nov 06, 2008 | Computers & Internet

1 Answer

EHCI controller not detected


try installing the software drivers for keyboard and mouse.....then see whether keyboard and mouse is working...if the problem persists.....then the problem is in motherboard.....that you have to give it to repair shop....so that you can identify the problem.....i am a software engineer.....and i have experience in these areas....thats why suggesting you this idea....try this....it will work 100%.....

Sep 20, 2008 | ASUS P5SD2-X Motherboard

1 Answer

Dimension c521 computer gives a post error, floppy drive 0 error and keyboard error


Hi,
The compute post tests the computer, insuring that it meets the necessary system requirements and that all hardware working properly before starting the remainder of the boot process.
1 Short Beep, Normal POST, computer is okay. No problem. 2 Short Beep, POST error....floppy drive 0 error and keyboard error........This can happen because there is something wrong with your floppy drive, something is causing your computer not to detect it or that you simply don't have one.
Check your floppy cables and connections first to ensure that they are connected properly, if they are then you may have a burned out controller on your motherboard, a bad floppy cable or drive, or your motherboard may be faulty. If you don't have one you can disable the message in your computers BIOS. To get to the BIOS screen, during boot up at the bottom of the screen it will say something like "press F2 for setup" or something along those lines. That will take you to the BIOS screen. In the settings there should be options like first boot device, second boot device, and so on... change the one that say 3.5 floppy to something else such as your CD rom.That will get rid of that message.
Keyboard error or no keyboard present shows up when your computer can't find your keyboard or there is something wrong with it. Replace with new keyboard. Thank you

Sep 06, 2008 | Computers & Internet

2 Answers

Disk boot failure prompt


hi, SInce u do not have a HDD u will need to boot up from cdrom, for that in the BIOS 2nd options,change the boot up sequence first to cdrom , second to any other disk.. let me know

Dec 17, 2007 | ASUS Intel 845 Chipset P4B (P4B WOA)...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

952 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18385 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...