Question about Riso RZ220 Duplicator

Open Question

Error code A06-403 THE PAPER TRAY DON'T MOVE Paper-feed-tray upper or lower safety switch is OFF. HOW I CAN SOLVE THIS PROBLEM ?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
checkitright
  • 1362 Answers

SOURCE: Paper tray will not lift on a GR3770

either the motor is not turning to lift it up or the gear is broken, do you hear the motor turning when the tray is pushed in? take the tray out and look in the back to see if there is anything blocking it also.

Posted on Sep 16, 2008

Ad
  • 30 Answers

SOURCE: Canon Pc 25 not pulling paper completely through from tray or from manual feed tray.

hi,clean feedrolls & paper transportation.clear any misfeed sheet in paper supply section.send me result.
thank you.

Posted on May 28, 2009

tbreeze47
  • 3083 Answers

SOURCE: I have a FR2910. When the tray lifts to start

I couldn't find this problem reported on the net, but I did come across an interesting blog about a sensor problem on a different model Riso- but since I suspect a sensor error here, it could be relavent:
http://www.copytechnet.com/forums/digital-duplicators/17418-riso-rz-220-a.html
It's either a gear or sensor issue, but I suspect a sensor.
I'm still trying to run down a service manual for you, but there is a different model manual on this site, and it's free, so it might help clue you in if it's close, or has similar sensors:
http://www.eserviceinfo.com/service_manual/datasheets_r_500.html
Of course, the gear mech in the tray assembly could be strung into a different configuration, and that would require a service manual to fix, and a lot of patience.
Here what one fellow said on copytechnet.com:
If anyone is having trouble with their riso I recomend buying one of the CD manuals sold on ebay, and then downloading a hard copy of the manual for their machine.

There are a bunch of test codes that are really helpful, but I wish Chilton's had a Riso manual

That's all I could run down, and I never worked on a Riso, so I can't offer any insight, but since this problem wasn't reported, it must be some tricky sensor or tray feed issue.
I found this link for a "technical manual" which might be useful to you:
http://www.nodevice.com/manual/riso.html

Hope this helps, and thanks for using FixYa.

Posted on Sep 11, 2010

  • 132 Answers

SOURCE: The paper tray does not

is this on a cr machine if so the harness between the tray and the machine is broken

Posted on Mar 07, 2011

jhld53
  • 1 Answer

SOURCE: We have a gr 3750

I had the same problem when I tried to replace the separation pad with a different one. The new one was too thick so Riso thinks it has a paper jam, and there is no error code on the panel for it. Just says clear paper jam and reset.
So you must have a similar problem in the area of the separation pad? It could also be the sensor in that area is bad or out of adjustment. I think it has to be one or the other.

Posted on Dec 04, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code A06-403 on riso 5330 how I can remove


A06-403 from the manual: either the upper or lower safety switch of the paper feed tray is off. Unplug/replug or replace.
Hope after this you fix the error. If still have error please call me at 1800-204-4427 I can help you out.

Aug 18, 2017 | Office Equipment & Supplies

1 Answer

Konica minolta c350 error code c204


C 204 Tray 2 feeder up/down abnormality.Check the M9 paper feed tray 2 lift up motor connector for proper connection,the PS15 paper feed tray 2 upper limit sensor actuator,the motor coupling.

Jul 27, 2014 | Konica Minolta bizhub Office Equipment &...

1 Answer

PAPER DOESN'T FEED THROUGH


check on the panel of the printer if the selected paper tray is the lower tray or the upper tray put paper on both tray mark the paper so you can see which tray is being feed,

Aug 04, 2011 | Canon LaserCLASS Fax 710 Printer

1 Answer

I Have an EPSON Stylus TX700W Printer , & am having problems getting it to feed paper. Have tried all the Paper Jam solving problems to no avail. Printer just keeps saying "The Paper Cassette is...


This can also be caused when the upper cassette tray (for small paper stock / photo paper) becomes detached from the lower tray. There is a gear attached to the lower paper tray which handles movement of the upper paper tray. Make sure that moving this gear causes the upper paper tray to move. If it doesn't, then you need to snap the upper paper try on a little better.

Jul 10, 2011 | Office Equipment & Supplies

1 Answer

When i switch on my photocopier tohiba 2860, it asks for service and gives an error code 08221-918100. what could be the problem?


Hi tkasirye,

Welcome to Fixya.

You may need to check again the error code. According to the manufacturer's checklist for error codes, only the following are documented;

  1. Error Codes - Toshiba 2860

  1. "E01" Paper jam inside machine. "E02" Paper jam near the fuser. "E03" Paper jammed inside machine when power supply is switched on. "E04" Front cover open while copying. "E05" Paper jam near the aligning roller "E08" Paper jam at stacking area in the ADU "E11" Paper feeding jam at the ADU "E12" Manual feeding jam "E13" Paper jam from cassette 1 "E14" Paper jam from cassette 2 "E15" Paper jam from cassette 3 "E16" Paper jam from cassette 4 "E17" Paper jam from cassette 5 "E19" Paper jam from the LCF "E21" Paper jam in transport route 1 (LCF) "E22" Paper jam in transport route 2 (COPIER) "E23" Paper jam in transport route 3 (ALIGNING) "E25" Paper jam in transport route 4 (PFP) "E71" Original feed jam in ADF "E72" Original transporting jam in ADF "E73" Original exiting jam in ADF "E75" 2nd original feeding jam "E81" Paper jam before sorter "E82" Paper jam in sorter "E83" Sorter early arrival jam "E84" Paper in sorter when power is turned on "E85" Joint open jam while copying "E88" Paper jam outside the sorter bin "C01" Abnormal operation of the copier main motor "C04" Abnormal operation of the PFP main motor "C05" Abnormal operation of the ADU main motor "C11" Abnormal operation of the ADU side motor "C12" Abnormal operation of the ADU end motor "C13" Abnormal operation of the upper cassette tray "C14" Abnormal operation of the lower cassette tray "C15" Abnormal operation of the PFP upper cassette tray "C16" Abnormal operation of the PFP middle cassette tray "C17" Abnormal operation of the PFP lower cassette tray "C18" Abnormal operation of the LCF tray "C21" Optics carriage initialize error "C22" Lens initialize error "C23" Mirror initialize error "C26" Faulty exposure lamp "C33" Easy set-up is failed "C35" Developer material exists at the transfer separation adjustment "C41" Faulty thermistor or heater "C43" Faulty thermistor "C44" Faulty heater "C45" Sub thermistor is open
Shoulg you not find any of these mentioned error codes, I suggest you contact the tech support especially if the machine is still under warranty.

Hope this helps.

Takasashi

Jul 05, 2011 | Toshiba Office Equipment & Supplies

2 Answers

Our school owns a Riso RZ machine and theirs a problem with it; the code is A-06 it also has this -403. Could you please help?


our school owns a Riso EZ 200ep machines and their problem with it ; does not want to pull a master roll and give the code error A-06 and -403. Could you please help me on this.

E-mail me; nambwex007@yahoo.com

Jan 04, 2011 | Riso RZ390 Duplicator

1 Answer

Im having problems with my Riso RZ300. error A-06 and ive tried to clean the paper tray it keeps on flashing the same error. Thanks for your attention David


There should be a numeric extension to the error. Ist it this error A06-403? This means:
Error type A06: Check paper feed tray Error point 403: Either the upper or lower safety switch of the paper-feed-tray is OFF.
Hint: Check the mentioned switches.

Oct 10, 2010 | Riso RZ220 Duplicator

1 Answer

Error code A-06-403 on the Riso RZ390 - what does it mean?


A06-403 from the manual: either the upper or lower safety switch of the paper feed tray is off. Unplug/replug or replace.

Aug 26, 2010 | Riso RZ390 Duplicator

3 Answers

Problema para Riso - Duplicadora RZ220 Copiadora Error message A-06-403 Mensaje de error A-06-403


where can i find the Riso RZ Paper-feed-tray upper or lower safety switch

Aug 09, 2010 | Riso RZ220 Duplicator

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

1,148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Riso Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Igor Studennikoff
Igor Studennikoff

Level 2 Expert

145 Answers

Are you a Riso Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...