Question about Watches
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Stop Solo Digital watch beeping every hour:
1 - Press and Hold RESET button
--- (keep holding while doing step two) ---
2 - Press START and you should notice the left circular display (with the alarm image) lose it's ring of blocks.
--- It should also beep once to indicate the change. ---
That should be it.
This was done with a black and gray Solo™ 30m Water Resist Digital Watch
Posted on May 21, 2010
SOURCE: Timex Indiglo Acqua watch
For analog Acqua watches adjust date when month has less than 31 days:
3-Position Crown: Pull crown to "MIDDLE" position and turn CLOCKWISE or
COUNTERCLOCKWISE until correct date appears.
2-Position Crown: Pull crown to "OUT" position and turn CLOCKWISE until date
changes (approx.1:00 a.m.). Then turn COUNTERCLOCKWISE to 7:30 p.m. Repeat until correct date appears.
Posted on Oct 02, 2008
I found users instructions on roxy website at:
We were able to program our watch completely!!!
If you look on the back of the watch that you bought on the metal plate, it tells you the style. Ours was the Roxy 70's digital watch, and I found specific instructions at (even if this is not your style, the instructions may work):
Posted on Dec 23, 2008
try this. same principal, buttons may be in different place. worked for me!
Posted on Jun 29, 2010
how to cancel alarm from casio illuminator wrist watch: press BLB to bring alarm by showing SNZ( alarm mode),thenpress BRB to bring SNZ ,press TLB and keep pressing until hour flashes,pressBRB to set hour.press TLB until hour flashes,release and press BLB ,minuteswill flash,set the time of alarm. BLB:Bottom left button,TLB: top left button
Posted on Sep 27, 2010
Tips for a great answer:
Jun 02, 2014 | Watches
Jul 07, 2013 | Citizen EK5290-53A Wrist Watch
These are the instructions posted on the Armitron website. I hope they help.
1. From Time Telling Mode, press 'B' twice to enter the
2. Press 'A'. Alarm Hours flash. Press 'C' to advance the
3. Press 'B'. Alarm Minutes flash. Press 'C' to advance the
4. Press 'B'. Alarm Time Zone flashes. Press 'C' to select
either Time Zone 1 or Time Zone 2.
NOTE: The Alarm is available in one Time Zone only.
5. Press 'A' to end set sequence.
6. Press 'B' to return to Time Telling Mode.
ACTIVATING THE ALARM AND HOURLY CHIME
1. While in Alarm Mode, press 'C' to activate the Alarm.
The Alarm symbol appears to indicate the Alarm will
sound at the preset Alarm Time for 20 seconds or until
'A', 'B' or 'C' is pressed.
2. Press 'C' again to activate the Hourly Chime.
"CHIME" appears to indicate the Hourly Chime will sound
every hour on the hour.
3. Press 'C' again to deactivate the Alarm.
4. Press 'C' again to deactivate the Hourly Chime.
5. Press 'B' to return to Time Telling Mode.
Apr 12, 2011 | Armitron Digital Sport #40/8095SIL Watch
Mar 01, 2010 | Watches
Jul 17, 2009 | Bulova Watch
Jan 11, 2009 | Diesel Watch DZ7071
Mar 27, 2008 | JCPenney Armitron Sport Link Bracelet...
275 people viewed this question
Usually answered in minutes!