Question about Westinghouse LTV-27W2 27 in. HD-Ready LCD Television

1 Answer

I have sound, all remote functions work, I have no picture

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 675 Answers

These sets have a problem with the backlight circuitry which causes the set to operate properly( tune channels, sound ok, etc..) but there is no picture..this is likely caused by the filter capacitors in the inverter power supply circuit which , over time, tend to either leak or lose thier esr value. The repair usually consists of replacing a few electrolytic capacitors and possibly a resistor or fuse. If you can find someone who repairs these near you, you may want to get an estimate...theoretically, the components are not very expensive for this repair., and takes little time..so look out for scammers

Posted on Mar 26, 2011

Testimonial: "Thank you, it makes sense. The TV is 6 years old and has alot of hours on it, so maybe time for a new one."

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My TV still turns on and off, but there's no picture or sound. How do I fix it?


The modern TV has two power supply sections. The first is a low voltage +_5 V, very low energy consumption, to keep the remote control functions live. The main power supply seemed to have failed and could be very difficult to fix as it is a energy efficient switch mode supply. Normally the switching transistor or MOSFET fails first and the blows a fuse. Depending on the root cause, replacing these could restore its function.

Nov 18, 2015 | Televison & Video

1 Answer

No picture, just sound on Etec Flat Panel 40A99


Video circuit is separate from the Audio circuit. The main controller may switch to Audio, but if the unit is damaged from a power outage; part of the circuit board may not function. Needs professional servicing.

Feb 26, 2014 | Cars & Trucks

1 Answer

I cant get rid of the picture in picture box off screen with no remote controll?


It sounds that closed caption function is On with your TV. Try to access the close caption On/Off function, by its menu controls and try to set it off. Some TVs wont allow you to do this, even though there is a Menu control on its front panel. To such TVs, a remote control is a must to get rid of this.

Nov 07, 2012 | Televison & Video

1 Answer

The picture works but the audio sound does not.Could this be due to the set been connected to virgin tv media and the remote has something to do with the problem, is there any manual way to obtain audio on...


first check the speaker setting in the menu see if the speaker is selected ON. if the speaker is on then check the SAP function of the set. check this with the remote with the MTS button on the remote. keep hitting the button untill the word stereo appears.

Jan 19, 2011 | Sony FD Trinitron WEGA KV-27FS100 27" TV

1 Answer

No sound


Check on the manual control on the tv itself Vol + - buttons see if functions normallyTry website like Remotes.com to buy a remote same as an exact original remote.

Jul 16, 2010 | Curtis-Mathis CM27101S TV

1 Answer

Sharp,Aquos, LC-37D64U,Power & Sound, No picture?


try replaced main board
Manufacturer Sharp Part Number DUNTKE373FM03S Description P.W.B.UNIT

Jun 03, 2010 | Sharp LC37D64U 37 in. LCD HDTV

1 Answer

On the DVD player the screen is blue and the sound works, but cannot get a picture. The remote will stop & start the sound, but still no picture. This unit is in a 2006 motorhome. On VHS side works...


suspect scart lead, check to see that it is firmly plugged in. Also, many dvd players have a bluescreen/screensaver function, check to make sure this ihasn't been enabled in the system set up menu.

Nov 27, 2009 | RCA RTD300 System

1 Answer

MWD2205 remote stopped working for DVD functions


not sure but it sounds like you need to push the dvd button itself before dvd functions will work-it's to the left of the pause button. same thing happened to me and when i try that it works. remote seems to default to vcr i guess ....

Mar 23, 2009 | Philips MWD2205 DVD Player/VCR

2 Answers

Buttons on front console no longer work.


time to upgrade not even worth it or to find parts sound like bad controller old ok samsung upconverting one 89 bucks circuit city k betifull picture thx nick

Feb 08, 2008 | Memorex MVD2027 DVD Player

Not finding what you are looking for?
Westinghouse LTV-27W2 27 in. HD-Ready LCD Television Logo

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Westinghouse Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Cindy Wells

Level 3 Expert

5100 Answers

Are you a Westinghouse Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...