Question about Delta Luv Baby Gear
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i have the same crib, you just need to remove the dropside . i removed all the screws and pulled it out. otherwise on the mattress board there's instructons but its pretty much the same thing.
Posted on Jan 07, 2011
I can't offer the exact answer, but hopefully my suggestions will be helpful...
Converting the crib to a full-size bed should actually be a fairly simple process of detaching the 4 sides that make the crib, and replacing the 2 short sides with the full-size bed rails that were sold separately in a conversion kit. The 2 long sides of the crib become the headboard and footboard of the full-size bed.
Unfortunately, it's only a simple process if you already have the full-size conversion kit bed rails. And since Morigeau-Lepine went out of business, they aren't making any more conversion kits. If you don't have the full-size bed rails, then this could be quite difficult.
It's possible that some stores that used to sell Morigeau-Lepine cribs might still have a conversion kit hidden somewhere in the back of their stock room or warehouse. You could try calling around to a few of your local stores to ask if they would check for you. It's a long shot, but it doesn't hurt to ask.
If you have the rails, or are lucky enough to find them, then it should be as simple as locating the screws that hold the crib sides together, removing them (most likely with an appropriatly sized hex-key,) and putting the screws back through the headboard and footboard into the bed rails. (I'm really just assuming that it works the same as the Babi Italia conversion.) If no screws are visible, or if removing them doesn't detach the crib sides, then they are probably also held together with locking bed rail fasteners. To release the fasteners, remove any visible screws, then push upwards on the short side rail while pushing down on the long side rail. You might have to tap the rail up with a rubber mallot to get it moving.
If you don't have the full-size bed rails, and you can't find them anywhere, your only option may be to build them yourself, or find a woodworker to build them for you. Search online for "Bed Rail Fasteners" and you'll see several options for hardware, but they might require modifying the headboard and footboard as well. Full-size matresses are 75 inches long, so you'll want the length of your rails to accomodate (ours are 77 inches long.)
I hope I've been helpful. Good luck!
Posted on Jan 19, 2011
Tips for a great answer:
Jan 10, 2017 | Sewing Machines
Jun 21, 2012 | Baby Gear
Sep 12, 2010 | Delta Martine Crib
Jan 09, 2010 | Delta Martine Crib
Jan 01, 2010 | Delta Martine Crib
Dec 29, 2009 | Delta Martine Crib
Jul 25, 2009 | Delta Luv Delta - Baby Products 5-in-1...
May 31, 2009 | Simplicity for Children Prescott 4-in-1...
Mar 01, 2009 | Delta Martine Crib
Aug 30, 2008 | Graco Apsen 3-in-1 8740 Crib
226 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: