Question about Kodak EASYSHARE 5300 All-In-One InkJet Printer

1 Answer

Printhead Where can a person find a replacement printhead. Or do I just throw this thing in the trask?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 96 Answers

Replacement printheads come only from Kodak AiO Tech Support - 1800 421 6699.

Posted on Aug 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon mp600 U052 error code


Hello,

U052 means there is a printhead problem, either the printhead is incorrect, is not seated properly, or has become damaged.

Please take these steps to reseat the printhead, Reseating the MP600 print head.

Unplug the printer sharply from the power outlet while it is still on. While the printer is off, press and hold the power button for 1 minute

Finally, while holding down the stop/cancel button (or just the power button if you don't have those), plug the printer back in, and power on the printer if it doesn't do so automatically.

Then try to do a printhead alignment, click here

However, if you'd done all of the above except for purchasing a new printhead part, something it is usually cheaper to get a new printer, as the work needed to replace parts, and the part itself costs more or almost as much as a new printer. Printers are usually "throw-away" devices, the companies make them too cheap and they normally don't earn on the printer itself, but rather by selling print cartridges and special paper.

If you prefer to purchase a new printhead, you can get one here: Canon QY6 0061 Printhead for Pixma Photo Printer

Hope this helps

Mark

Aug 24, 2014 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

Error message 933 service printhead error


f the printer continues to post a 930 Printhead Error, it thinks the wrong printhead unit is installed.
  • If the printer was recently serviced, make sure the correct parts were used. This is especially true if the parts replaced were either the printhead unit or the printer's engine/system board. It is in one of these two parts that the printer is detecting the problem. Note: If you are the person repairing such a printer, please be aware that parts from different, though similar, printer models may not be compatible with this printer. Also make sure to check the laser cable going from the printer's engine board to the printhead unit, as it reads that signal.
  • If the printer was not recently serviced before this error occurred and powering the printer off and on does not help, the printhead unit and possibly the laser cable or the engine/system board to this printer may need to be replaced.

Mar 03, 2010 | IBM Infoprint 1352 Laser Printer

1 Answer

I replaced my black cartridge on my injet 2230 but it keeps telling me that i need to replace black printhead. I've tried two so i know it isn't a problem with the cartridge


The cartridge does not have a printhead included as part of it.
The printhead is a separate thing normally located behind the cartridges.
You need to replace the printhead, not the cartridge.

Jul 13, 2009 | HP Inkjet 1200dn Printer

1 Answer

Kodak 5100 all in one printer, 3802 code


You need to contact kodak and ask for a replacement print head, explain the code and whats been happening.

www.kodak.co.uk or www.kodak.com

They will probably tell you to download new drivers and wash your printhead ect ect but nothing that helps.

I had the same problem with the same printer.

I couldn't get Kodak to send out a printhead, so after weeks of messing around, I took it back for a refund.

If you do manage to get a new printhead here are the instructions on how to remove and replace it.

http://www.kodak.com/global/plugins/acrobat/en/service/manuals/AiOPrinters/printhead/AUR1780-9_UE_RevC.pdf

Jan 26, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

2 Answers

Printhead replacement


you may need to replace the printhead this is very easy to do first take out the ink cartrages and and look for the bulls eye right above the bulls eye there is a tab push tab to release printhead tray take out and replace with new one put tray in place and snap back into place replace ink cartrages.

Dec 30, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Lexmark C510 - 930 Printhead Error


93x Printhead Error
Each printhead error has its own error code number. The error codes and their respective meanings are listed below, together with some actions you can take to resolve the problem. 


ALL printhead errors:
If this is the first time the error has occurred, try turning the printer off and on. 
Let it sit turned off for at least 20 seconds before powering it back on. 
If powering off and on the printer clears the error, please continue using the printer but watch it to see if any printhead errors return. 
If your printer continues to display a Printhead Error message, make sure it is plugged straight to the wall and not through a surge device or power strip. Power strips and uninterrupted power supplies can cause a low amperage problem in your printer. This can trigger a printhead error even if the printer has worked on this surge device for months. 
  
If the printer continues to post a 930 Printhead Error, it thinks the wrong printhead unit is installed. 
  
If the printer was recently serviced, make sure the correct parts were used. This is especially true if the parts replaced were either the printhead unit or the printer's engine/system board. It is in one of these two parts that the printer is detecting the problem. Note: If you are the person repairing such a printer, please be aware that parts from different, though similar, printer models may not be compatible with this printer. Also make sure to check the laser cable going from the printer's engine board to the printhead unit, as it reads that signal. 
If the printer was not recently serviced before this error occurred and powering the printer off and on does not help, the printhead unit and possibly the laser cable or the engine/system board to this printer may need to be replaced. 
 
If the printer continues to post a 931 Printhead Error, it thinks there is an error in the signal going to the laser or the Hsync part of the printhead assembly. 
If the printer continues to post a 932 Printhead Error, it thinks there is an Hsync error occurring in the printhead assembly. 
If the printer continues to post a 933 Printhead Error, it thinks there is a failure in either the Hsync signal or with the mirror motor unit of the printhead.  
If the printer continues to post a 934 Printhead Error, it thinks there is a "lock" failure with the mirror motor assembly within the printhead assembly. 
If the printer continues to post a 935 Printhead Error, it thinks the mirror motor unit within the printhead unit cannot reach its operating speed.
 
If powering the printer off and on does not clear any of these errors and it is already connected directly to the wall, your printer may require service. It could have a defective printhead unit or there might be a problem with the engine board or one of the printhead cables. Note: If you are the person repairing such a printer, check all of the cables going from the printer's engine board to the printhead unit for any damage. Also check the continuity across these cables. 


Source: Lexmark KnowledgeBase

Jul 28, 2008 | Lexmark C510 Laser Printer

2 Answers

Printer problems


Sorry for your frustrations. Throw the piece of junk away and save yourself from recurring aggrevations.

Jul 12, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Infronprint 1352 93x Printhead error


Basically this is a Lexmark printer.

Try these if no result replace printhead ( can be expensive will try to find the comparable to the lexmark.

93x Printhead Error

Each printhead error has its own error code number. The error codes and their respective meanings are listed below, together with some actions you can take to resolve the problem.

ALL printhead errors:
  1. If this is the first time the error has occurred, try turning the printer off and on.
  2. Let it sit turned off for at least 20 seconds before powering it back on.
  3. If powering off and on the printer clears the error, please continue using the printer but watch it to see if any printhead errors return.
  4. If your printer continues to display a Printhead Error message, make sure it is plugged straight to the wall and not through a surge device or power strip. Power strips and uninterrupted power supplies can cause a low amperage problem in your printer. This can trigger a printhead error even if the printer has worked on this surge device for months.
    • If the printer continues to post a 930 Printhead Error, it thinks the wrong printhead unit is installed.
      • If the printer was recently serviced, make sure the correct parts were used. This is especially true if the parts replaced were either the printhead unit or the printer's engine/system board. It is in one of these two parts that the printer is detecting the problem. Note: If you are the person repairing such a printer, please be aware that parts from different, though similar, printer models may not be compatible with this printer. Also make sure to check the laser cable going from the printer's engine board to the printhead unit, as it reads that signal.
      • If the printer was not recently serviced before this error occurred and powering the printer off and on does not help, the printhead unit and possibly the laser cable or the engine/system board to this printer may need to be replaced.
    • If the printer continues to post a 931 Printhead Error, it thinks there is an error in the signal going to the laser or the Hsync part of the printhead assembly.
    • If the printer continues to post a 932 Printhead Error, it thinks there is an Hsync error occurring in the printhead assembly.
    • If the printer continues to post a 933 Printhead Error, it thinks there is a failure in either the Hsync signal or with the mirror motor unit of the printhead.
    • If the printer continues to post a 934 Printhead Error, it thinks there is a "lock" failure with the mirror motor assembly within the printhead assembly.
    • If the printer continues to post a 935 Printhead Error, it thinks the mirror motor unit within the printhead unit cannot reach its operating speed.
  5. If powering the printer off and on does not clear any of these errors and it is already connected directly to the wall, your printer may require service. It could have a defective printhead unit or there might be a problem with the engine board or one of the printhead cables. Note: If you are the person repairing such a printer, check all of the cables going from the printer's engine board to the printhead unit for any damage. Also check the continuity across these cables.

Jul 02, 2008 | IBM Infoprint 1352 Laser Printer

1 Answer

Phaser 8550 error 19,004.40


The printhead was installed in another machine and the codes do not match. You need to manually sync them. Here is the procedure:

Manually synchronize the Printhead and Electronics Module codes.
NOTE: The Printhead and Electronics Module codes should synchronize automatically when a new printhead is installed. If a 19,004.40 error occurs, it is possible that the replacement printhead was previously installed in a different printer. After manually synchronizing the Printhead and Electronics Module codes, be sure to test the new printhead for print quality defects.
To manually synchronize the codes;
1). Power OFF the printer.
2). Disconnect the printer from external devices (A/C power can remain connected).
3). Locate the "Factory Only" port on the electronics module (located between the PS and PE lights (Figure 1).
4). Use a Hard Disk Drive (HDD) jumper (Figure 2) to short the top two pins.
NOTE - If a HDD jumper is not available, use another conductive item, such as a screwdriver, to short the pins. Use caution to avoid contacting the surrounding frame, as this may permanently damage the Electronics Module.
5). With pins shorted, power ON the printer.
6). When printer reaches the mechanical initialization stage of the power on sequence, power the machine back OFF.
7). Remove the HDD jumper.
8). Code should now be synchronized. Power ON machine and verify the 19,004.40 error does not re-occur.
NOTE - If error persists after this procedure, attempt the procedure again, and be sure to allow the printer to complete its BIST and POST test before powering OFF in step 6.





Jun 29, 2008 | Xerox Phaser 8500/DN Printer

2 Answers

No Blank Ink When Printing Photos


Try cleaining the printhead.

1. Open up Kodak AiO Home center.
2. Click on ? on top right corner and go to maintenance then printhead cleaning.

Dec 17, 2007 | Kodak EASYSHARE 5500 All-In-One InkJet...

Not finding what you are looking for?
Kodak EASYSHARE 5300 All-In-One InkJet Printer Logo

Related Topics:

412 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18334 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...