There is a wire on the harness (pink or brown i think) called cell phone mute. if this wire is touching power or ground or any other wires you will have these problems. make sure this wire is taped off and secured behind the dash.
If it was hooked up intentionaly it will mute your stereo anytime a call comes in on a cell phone.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi there, If you like you can read throuh the manual for further help if this fails, at this address : http://www.cartoys.com/cartoy/pdfs/kdc-122s_manual.pdf
However the units have a forcible eject mode, im raking my brain for it but i think 90% sure its as follows... Try pressing and holding eject and the power button at the same time for about three to five seconds, the machine shoudl buzz louder then normal an do a full eject cycle for about 2 seconds, If worse comes to worse you can take off the outer casing four screws (if not under warranty) and carefully lift the disc slightly and slide it out. Take care to to force anything as you can damage/scratch the unit. Another option is that you ring the Kenwwod customer service number and ask how them what the button press combination is for forcibly ejecting cds from the unit. you may need to ask for someone in repairs there to get a knowlegable answer, Hope this helps Cheers STeve
I tried to download music through windows media player and it shows the music as being down loaded but the equipment keeps going to recordings when I go to "music mode" and NOTHING comes through the ear buds! Please help
Press and hold in the SRC button until the unit turns off. While power is OFF,
press and hold FNC and AUTO/TI buttons, and momentarily press the SRC button to
power the unit back on. Continue to hold the other buttons until the unit comes
back on completely.