Question about Emerson EWD2204 DVD Player/VCR

1 Answer

Remote will not work. I have chged the batteries and made sure they were in correctly

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Emerson Master
  • 74,118 Answers

Hello
Check the remote contro for its infrared emission. You can check it with a cellphone with camera option. Put the cellphone to camera mode, and place the remotes' front end towards its lens, at about one feet away from it, and press each button on the remote control. If there is infrared emission from it, you can see its image on cellphone camera screen. If not check the remote control. Check the battery polarity. If it is alright, you have to open it to see whether there is any loose soldering points developed or not.
If ther is infrared emission from the remote, and still the TV doesn't respond to it, surely the infrared sensor inside the TV is faulty, and should be replaced with same type and number. OK.

Posted on Mar 26, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just bought Topfield TRF2100, screen on and says"installation", but remote won't work.


Be sure there are fresh batteries in the remote. Be sure they are installed correctly and that there is nothing covering the remote's battery contacts. Look to see if there is a film covering the remote's infrared lens or the receiving unit's eye. Check your manual to see if you need to program the remote to the unit. if it's a multi-unit remote, be sure that you have set it to control the specific unit you're working with.

Jul 17, 2015 | Televison & Video

1 Answer

My proscan remote doesn't work, and the batteries are good.'


If the batteries are good and are inserted correctly. Check the laser bulb at the top end to make sure it is clean and the receiver bulb on the TV to make sure it is clean and not blocked. If that still doesn't work then something in the remote has burned out or gotten damaged and is unlikely repairable.

Sep 28, 2014 | Samsung TV Remote Control

2 Answers

Door remote


need reprogrammed to the car.. dealer issue..

Jan 07, 2014 | 2008 Honda Odyssey

1 Answer

Remote not working


If you recently changed batteries, remove the batteries and make absolutely sure that they are connected properly. The + and - ends of the batteries must be correct. This is the #1 reason remotes stop working.

I am an Electronics Engineering Technician and have, through inattention, put one or more batteries in backwards. And I was SURE I put them in correctly. :>)

The second most common failure is that the remote has been dropped so many times that the battery contacts no longer make firm contact with the batteries. You can usually gently bend them outward to fix this.

Another common problem is the Infrared LED in the remote fails. Only a Tech can fix this.

Mar 24, 2013 | LG Televison & Video

1 Answer

My remote control eats batteries


I replaced the battery in a VW key fob with an exact match of the dead battery I found in it. The fob worked again but the new battery lasted only 1 day. I checked the manual and discovered that the wrong battery had been installed by the previous owner and I had repeated that mistake. I installed the correct battery and it has worked fine ever since. I suggest that you double check to be sure you are installing the correct replacement batteries.

Are you sure you have the cHave y

Jan 19, 2012 | Cars & Trucks

1 Answer

My remote will not work. never has and i bought it brand new.


Check and make sure the battery is installed in the remote. If it is installed, check for the correct installation. If this is correct, replace the battery. If it still doesn't work, you might have a faulty remote.

Apr 12, 2011 | Jensen Vm9214 Car Video Player

1 Answer

MY REMOTE STOPPED WORKING. I REPLACED BATTERIES. STILL NOT WORKING. WHAT IS THE PROBLEM?


Hello

If it is a universal remote make sure you selected TV and not SAT or another component on the remote.

Make sure the batteries are inserted correctly.


THANK YOU FOR VISITING FIXYA

Mar 03, 2011 | Toshiba VC-P3S Remote Control

1 Answer

Volume does not work on television


Check the batteries.
If you have a digital camera, camcorder or camera phone, turn it on and point the remote at the camera lens. Press the volume buttons on the remote. You should see a flash on the camera lcd screen. If not the buttons on the remote are not working.
Check the buttons on the side/top of the tv to make sure the tv volume is working.
If the remote is dead, sometimes doing the following steps may restore it.
Step 1- Pull the batteries out of the remote and leave them out until Step 4.
Step 2- Press and release each and every button one at a time on the remote control until every button has been pressed and released at least once!
Step 3- If your remote has slide switches, you must move the switch to each position then repeat the button pushing in Step 2.
(When you're done, be sure to put the slide switch in the correct position to operate the unit the remote came with!)
Step 4- Put the batteries back into the remote, being very careful to install them correctly.
New batteries should be used if you're not sure about the old ones.
Step 5- Try the remote.

Feb 15, 2011 | Samsung TV Remote Control

1 Answer

Remote want work on tv


Hi,

Make sure that you're using the supplied Remote (RMY-906) to control the TV. If so, perform the steps given below to resolve the issue.

  • Make sure that you're using batteries which are having enough charge. Try using fresh alkaline batteries.
  • Do not use rechargeable batteries in the Remote.
  • Ensure that the batteries are inserted correctly with the correct terminals by checking the + and - symbol in the battery compartment.
  • Make sure that the Remote is set to operate with the correct functions. On the remote control, press the TV FUNCTION button to re-check this.
  • Press the POWER button and other buttons to test the operation.
  • Make sure that none of the buttons are jammed in the remote control.
  • Ensure that the remote control is being used no closer than 3 feet and no further than 10 feet away from the unit. Try using the remote control at varying distances from the TV.
  • When using the remote control, be sure to point it directly at the remote sensor on the device.
  • Remove any obstacles that may be in the path between the remote control and the device.
  • Ensure the remote sensor of the device is not exposed to direct sunlight or bright florescent lights, as this can interfere with the sensors ability to receive signals from the remote control.
  • Try resetting the Remote. To reset the Remote. remove the batteries from the remote control, press every button twice, and then reinstall the batteries.
  • Try resetting the TV also to check the operation. To reset the TV, disconnect the power cord for a short period of time (approximately 1 minute), then reconnect the power cord and power on the television.


If the remote control is able to operate other devices (such as cable box, DVD Player or satellite receiver), then the issue may be with the IR sensor on the TV. If this is the case then the TV that will require service. Otherwise, the remote control may need replaced.


Good Luck!

KenSolutions

Nov 23, 2010 | Sony KP-61S75 TV

1 Answer

Remote stopped working


Try the buttons on the TV to verify that the set is working. Then;
Step 1- Pull the batteries out of the remote and leave them out until Step 4.
Step 2- Press and release each and every button one at a time on the remote control until every button has been pressed and released at least once!
Step 3- If your remote has slide switches, you must move the switch to each position then repeat the button pushing in Step 2.
(When you're done, be sure to put the slide switch in the correct position to operate the unit the remote came with!)
Step 4- Put the batteries back into the remote, being very careful to install them correctly.
New batteries should be used if you're not sure about the old ones.
If you are still having problems, you may have to replace the remote.

Mar 16, 2009 | Sharp LC-32SB21U 32 in. LCD TV

Not finding what you are looking for?
Emerson EWD2204 DVD Player/VCR Logo

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74118 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

 Grubhead
Grubhead

Level 3 Expert

5056 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...