Question about Kenmore Elite HE4 Electric Dryer

1 Answer

Kenmore elite gas dryer smart heat quiet pak 9 HE4

The dryer has power , but the controls do not light up so that the dryer can be used

Posted by on

  • 2 more comments 
  • Anonymous Aug 12, 2008

    same type of dryer. exact same problem.

  • Anonymous Mar 13, 2014

    After Tech repaired the thermostat(?), it makes a noice like a chain turning in the drum but does not last constantly.

  • Anonymous Mar 16, 2014

    kenmore elite h4 gas dryer no heat

  • Anonymous Mar 17, 2014

    I want to reverse the dryer door

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,028 Answers

Possible front control bd ..be sure there is 220 volts to rear connection first

Posted on Aug 04, 2008

1 Suggested Answer

blueextc3221
  • 15935 Answers

SOURCE: kenmore elite he4 quiet pak 9 dryer display code

PF - Power Failure - PF error code indicates a power failure during the dryer's cycle. Press and HOLD start to continue the cycle, or press off/pause to clear display.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Kenmore Elite quiet pak 9 dryer not heating. I replaced the heating element still no heat


I would say it would be the control panel (actually only thing it could be)
hydeparkappliancerepair.com or visit us on Facebook

Mar 07, 2014 | Kenmore Elite HE4 Electric Dryer

1 Answer

Kenmore elite quiet pak 9 Runs but would only heat for about 10 SECONDS then heat would go away but continue running until cycle is done.


The heat coming on for 10 seconds is probably just the pilots trying to light the burner. It sounds a lot like the gas coils (solenoids) are bad.

Mar 09, 2011 | Dryers

1 Answer

My Kenmore elite HE4 quiet pak 9 electric dryer is working, but it emits a constant series of 3 beeps, and sometimes shuts off before the cycle is complete. I have to unplug it to stop the beeping....


You are getting moisture in the control panel buttons. After a while the panel will not function at all. The light in the dryer tub will still come on when the door is open. When you unplug your machine and it sets for awhile you are allowing the moisture to dry and the machine can reset. Some people use a hair dryer to dry out the control panel for a temporary fix. Eventually, you will have to get it replaced once it stops resetting for you.

Oct 25, 2010 | Kenmore Elite HE4 Electric Dryer

2 Answers

Kenmore Elite Smartheat Quiet Pak 9 won't start. Light turns on and off inside drum when door opens/closes, but no lights come on on the outside display.


My Kenmore Elite dryer keeps beeping..just going through the end of cycle alarm-high,low,off...anyone have any suggestions?

May 30, 2010 | Kenmore Elite HE4 Electric Dryer

1 Answer

Kenmore elite he4 quiet pak 9 dryer display code


PF - Power Failure - PF error code indicates a power failure during the dryer's cycle. Press and HOLD start to continue the cycle, or press off/pause to clear display.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

May 15, 2010 | Kenmore Elite HE4 Electric Dryer

1 Answer

Kenmore Elite HE4 gas dryer, no heat at all


The ignitor may be bad or the thermal fuse may be failed.

Aug 27, 2009 | Kenmore Elite HE4 Electric Dryer

2 Answers

Kenmore smart heat quiet pak 9, just beeps won't start


m dryer did the same thing tonight and it was the door switch luckly i wiggled it and it came back on

Feb 22, 2009 | Kenmore Elite HE4 Electric Dryer

1 Answer

"controls locked" red light indicator is lit up...


Hi! mingx2of06
So are any lights on, do you have power at the wall circuit.
InMrFixIt

Aug 08, 2008 | Kenmore Elite HE4 Electric Dryer

1 Answer

Kenmore Elite quiet pak 9 dryer


Error message E1 indicates the temperature thermistor has failed.

Jun 22, 2008 | Kenmore Elite HE4 Electric Dryer

Not finding what you are looking for?
Kenmore Elite HE4 Electric Dryer Logo

Related Topics:

1,932 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...