Question about Cobra 29 LTD CB Radio

1 Answer

I know to simpley clip the modjulation on a cobra 25 you cut D9 what do you cut on a cobra 29 to do the same

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,274 Answers

Hello skeeterstoke,
Welcome to FixYa.
My name is John, and I will be assisting you with your issue today.
You didn't state what 29 you have! Here is one for the OLD 29, cut
D24, and adjust L7, and L8 for highest peek on the watt meter. If this is not your make, please re-post
with the one you have! Your comments and testimony's are always welcome here at FixYa.
Thanks for choosing us today and in the future.

Posted on Mar 26, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Peaking and tutuning a cobra 25 ltd classic
25 LTD CLASSIC, VR5 or CUT D9, L10, L9, L8.

Jun 24, 2016 | Cobra Radio Communications

1 Answer

How to wire a lt2 in a cobra 25

rewire it like you would a breadboard the just rewire it to the radio.

Oct 01, 2014 | Radio Communications

1 Answer

How do I adjust modulation on cobra 25 wx nw st?

The Modulation adjustment is VR5, or you can cut D9, though I do not recommend completely disabling the AMC circuit. If VR5 does not have enough range, lift the banded end of D9 & solder a 1K-ohm resistor in series with the diode, then adjust for 100% modulation or to where the AMC circuit just starts to limit modulation.

Mar 09, 2014 | Cobra 25 WX NW ST CLASSIC CB RADIO WITH...

1 Answer

Cobra 29 ltd classic no modulation

check VR4 to make sure it isn't closed . Check D 11 to make sure it isn't clipped . Turn VR 4 clockwise till it stops then back it off a little .If D 11 is clipped replace it with another diode then try it again. If it doesn't work it could be your final or your driver so replace both..

Jan 15, 2014 | Cobra 25 LTD 40-Channels Base CB Radio

2 Answers

Can you expand the freq. range of the cobra 25 CB 40 channel radio

Yes its possible to do with the EXPO kits.. or an eeprom. but beware of the FCC rules please. RX purposes' only not to be used for Transmiting..

May 05, 2013 | Cobra 25 LTD 40-Channel CB Radio

1 Answer

Cobra 25 that doesn't have any receive


Jun 16, 2012 | Cobra 25 LTD 40-Channels Base CB Radio

1 Answer

Do you know the wireing for the cobra 25 ltd st where the mike plug on the inside buy color ?

You can experiment or look on some site Defcom Radio mods.. Snake doctors radio mods.

Apr 27, 2011 | Cobra 25 LTD 40-Channels Base CB Radio

1 Answer

Cb Radio blows the 15 amp fuse in the car when powered up

Look where the hook up wire goes into the circuit board. Find the protection diode.Round small black cynlinder with a silver band. cut the diode and run a continuity check across the positive and negative. If all checks out try to fire it up.15 amp fuse is way to high for that radio use 5- 7

Feb 09, 2009 | Cobra 25 LTD 40-Channels Base CB Radio

3 Answers

Cobra 25 LTD

Russ, go to RadioShack, if they don't have one in stock, they can order one. Or, you can Buy one on EBAY.

Jul 02, 2008 | Cobra 29 LTD CB Radio

Not finding what you are looking for?
Cobra 29 LTD CB Radio Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cobra Radio Communications Experts

Brad Brown

Level 3 Expert

17446 Answers


Level 3 Expert

3289 Answers


Level 3 Expert

81400 Answers

Are you a Cobra Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides