Ok my camera has been through alot but after all the stuff that happens to it it waz still working so today i neede new batteris so i got the batteries and stuff but when i turn it on it waz on but i couldnt ake no pic
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Take the memory card out of your camera and look at it. SD cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. If the switch is already in the proper position, slide it fully the other way and then back again.
attach the data cable that came with the camera to the camera and the PC.
the PC will immediately recognize your camrea and load its drivers.
it will open a window asking you what to do next.
it will also give you an option whereby you can either remove the pics from the camera otr let stay there.
select the pictures that you want to xfer to the PC and send them by email.
alternatively you can select all to get all pics on your PC.
Bad batteries can cause that. The flash module needs alot of power to charge. Your camera will still work, but without enough power to charge the flash module, it may take along time. Again.
Try fresh batteries.
I had the same problem - try to wiggle the zoom lense really carefully and the switch it on again. The zoom objective is canted a little bit and the motor is too weak to move the zoom objective.
You can also open the camera by removing all 8 screws around the camera and then removing the metal front (Just pull it in the direction of the zoom lens with your fingernails). Then you can access the zoom lens better ...
it´s normal in that kind of cameras it can be fine but after u shoot one pic with flash will happen the same, to fix the problem u will need to send it to a repair centre, they will isolate some stuff inside to prevent that from happening.