Question about Pioneer VSX-D812 Receiver

1 Answer

I have a pioneer vsx d812 in standyby mode (red light flashing), i wanna how how i could fix it

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,546 Answers

Thjere are service manuals for it in this directory...

http://www.kallhovde.com/pioneer/tricomp/Audio/VSX/

Generally speaking, an amp protects itself from heat, shorts, overloads and operator exuberance by refusing to turn on or stay on.


Overloads can be from excessive periods of high output or marginally low impedance loading by the speakers; and shorts would be wiring issues or a speaker blowing up.


You should be able to feel if it's hot. WHY is it overheating? Make sure it has sufficient ventilation on all sides and that vent holes are not blocked by dust balls. Ensure the fan (if equipped) is running as designed (some only operate on demand). Clean dust and debris from it.


If the amp comes back on after cooling, you're lucky. They only have so many self-protection cycles in their lives so continuously resetting or cycling their power without addressing the cause can do more harm than good.


If it protects immediately on a cool power up you should disconnect the speaker connections and try it 'naked'. If it comes up then diagnose which lead(s) are shorted. If it does not come up the problem is internal and should be left to an experienced and competent hands-on tech.

Posted on Mar 26, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i plug the reciver in with nothing hooked up no cables no speakers nothing i push the power button and it will flash a few times then it will go back to a solid red light i cant get it to do anything...


I have the same throuble about this >Pioneer VSX-D812 and in Manual exist the next section:

Chapter 10:

Additional information
Troubleshooting

If the STANDBY indicator blinks and the power shuts off

automatically, take the unit to your nearest Pioneer authorized
service center or your dealer for servicing.

Feb 20, 2011 | Pioneer VSX-D812 Receiver

2 Answers

Flashing Red MCACC Light


hold the tune down (-) button and multi zone on/off button for two seconds then receiver should reset on the VSX-1019AHK model!!!

May 22, 2010 | Pioneer VSX-1019AHK A/V receiver

3 Answers

Pioneer VSX-1019 with a flashing red MCACC


you can "release" the error by pressing the "down arrow" and the "zone 2 on/off" for 2 seconds.

Mar 11, 2010 | Pioneer VSX-1019AHK A/V receiver

1 Answer

Need instruction manual


this is the html version of the manual, mate:

http://216.239.59.132/search?q=cache:u0BNrr-T5QoJ:www.pioneerelectronics.com/PUSA/Unassigned%2BContent/ci.VSX-D812K%2B%2BOwners%2BManual.Protected+VSX-D812+7.1+Channels+Receiver+manual&hl=en&ct=clnk&cd=15&gl=uk&client=firefox-a

and this is the PDF of the manual:

http://www.pioneerelectronics.com/pio/pe/vgn/images/portal/cit_11221/50202operating_instructions_VSX-D812_2003411101157200.pdf


there are numbers at the bottom to call for remote controls, also..

hope this helps

chris

Nov 06, 2008 | Pioneer VSX-D812 Receiver

2 Answers

Standby/ON keps blinking...Pioneer VSX-D812


JUST PRESS ADVANCED SURROUND & ENTER FOR LIKE 3 SECONDS.. THAT WILL RESET THE SYSTEM CHIP INSIDE.. :)

Jul 27, 2008 | Pioneer VSX-D812 Receiver

2 Answers

Not responding


You might get it to reset by pressing the *adv surround* and *enter* buttons together for 3 seconds as this works for other models.

Jan 13, 2008 | Pioneer VSX-D812 Receiver

3 Answers

Stand by button flashes but receiver wont turn on


I have vsx-d812 that has an AMP ERR in error menu. the troubleshooting was found to be Q696 and Q697 in the DC prot. area on "C" board, up near front toward diplay in center of c board. You can get access to error codes on VSX pioneer unit by pressing "enter" and "adv. surr." simultaneously for 2 sec. The display should show what error code you are experiencing. I believe there are three diff. error codes. 1) AMP ERR 2) OVERLOAD 3) BOAD ERR (not mistyped) I hope this helps pinpoint error code for ya.

Oct 07, 2007 | Pioneer VSX-816-K/S Receiver

Not finding what you are looking for?
Pioneer VSX-D812 Receiver Logo

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5047 Answers

John
John

Level 2 Expert

509 Answers

T-Comtech Repairs
T-Comtech Repairs

Level 2 Expert

417 Answers

Are you a Pioneer Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...