Question about Office Equipment & Supplies

2 Answers

Printer I contacted Fixya this morning and spoke with a tech regarding my problem. I followed all instructions, however, these suggestions did not fix my printing problem.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The only suggestion I have for FixYa is to quit ripping the consumers off. The suggestion I received from your tech was a generic sugesstion that did not work. I was also told that I would not be charged if my problem was not fixed. After speaking (finally) with a FixYa rep about my dissatisfaction, as well as not being charged for this, I was told my account would be adjusted. It never was and I have never heard back.

FixYa is a rip-off !!!!!!!!!!!!!!!!!!!!!!!!

Posted on Sep 06, 2008

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

Hi! Had same problem on 9/4/08. Still waiting on another solution. According to their terms you are not to be charged until you select the "problem solved" box. My account had been charged before I received my 1st solution.

Dana

Posted on Sep 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace the ink cartridge when it will not center when I lift the lid


Hi,

Since you are not able to find the carriage ( which holds the cartridges ) in center position, Try to move the carriage manually to center. Make sure the printer is On or you can turn it off and move it to center and replace the cartridges.

Also, follow the steps given below as well.

  1. Remove the color ink cartridge.
    • Open the printer access door. For printers with LCDs, follow the instructions on the LCD screen.
    • Wait until the printhead is idle and silent, then pinch the latch on the color ink cartridge with your thumb and forefinger and lift it out of the printhead.

      85256b4b007150b9852572a30069458e_100.gif

      IMPORTANT: Make sure you are using KODAK Ink Cartridges. Your KODAK All-in-One Printer is designed to work with KODAK Ink Cartridges. Kodak is not responsible for the compatibility or performance of either non-Kodak brand ink cartridges or refilled ink cartridges. To purchase KODAK Ink Cartridges, go to Kodak's Web site, then to KODAK Store.

  2. Check the two electrical contacts on the ink cartridge for small marks, which should appear if the cartridge was installed correctly.

    If the electrical contacts do not have small marks:

    • Reinstall the ink cartridge, making sure you press down on it until it clicks into position.

      85256b4b007150b9852572a30069458e_111.gif85256b4b007150b9852572a30069458e_113.gif

    • Remove the color ink cartridge, then check the two electrical contacts on the ink cartridge again for small marks. Repeat if necessary.
    • Reinstall the ink cartridge.

  3. Close the printer access door. For printers with LCDs, follow the instructions on the LCD screen.
If the error condition continues, power cycle the printer:
  1. Turn off the printer.
  2. Disconnect the power cord from the back of the printer.
  3. Wait five seconds.
  4. Connect the power cord to the printer.
  5. Turn on the printer.
If the error is resolved, upgrade the firmware for your printer:
  1. Locate and select the firmware download for your printer.
  2. Follow the instructions to install the firmware.
If the error continues,try contacting the Kodak Tech support by clicking on contact us.

Thank you for contacting FixYa

*Please rate this solution with Thumbs Up

Nov 26, 2010 | Kodak ESP5250 All-In-One InkJet Printer

1 Answer

My printer is marked as idle, how do I fix it please?


Hi,

Click on the link below and follow the instructions to solve the Printer idle status issue.
Link


Thank you for contacting FixYa



*Please rate this solution with thumbs up and testimonial

Nov 19, 2010 | HP Office Equipment & Supplies

1 Answer

How do i run the printer's Wireless Setup Utility on my computer to configure the printer with the new wireless settings. i have the lexmark X4650


If you have already installed the printer software on your computer, try these steps:
Using Windows
  1. Go to Start menu.
  2. Click All Programs/Programs.
  3. Click Lexmark 4600 Series folder.
  4. Click Tools
  5. Click Lexmark Wireless Setup Utility. Follow the prompts on the computer screen.

Using Macintosh
  1. From the Finder desktop, double-click the printer folder.
  2. Double-click Lexmark Wireless Setup Assistant.
  3. Follow the instructions on the computer screen.

If you have not installed the printer software yet, refer to this article from the Lexmark website for the setup guide. How to Install the X4600 Series on Wi-Fi Network. Hope this helps.
If you need additional assistance, please contact Lexmark technical support. Thanks.

Nov 12, 2010 | Lexmark X4650 InkJet Printer

1 Answer

Wireless printer problems


Put the printer on default settings and configure wireless settings on it again.

Apr 21, 2009 | Office Equipment & Supplies

1 Answer

Hi i have an acer labtop and a hp deskjet 3920 printer but i dont know how to print out paper coz the printer is not identified in my labtop.


hi there! thanks for using fixya.com

I suggest that you should install first the software to your laptop and follow the instruction there on how to install your printer as recommended.

and then you can go to the process.

regards!

Feb 19, 2009 | HP DeskJet F380 All-In-One Printer

1 Answer

How to remove a printhead from Kodak 5300


You can email tech support for instructions or call the toll free number below. These are the instructions for my KODAK 5100 from Kodak tech support.

Thank you for contacting Kodak technical support. If you should have any questions regarding the replacement of the printhead for your KODAK All-in-One Printer, support is available at 1.800.421.6699, 7:00 A.M. to midnight, 7 days a week.

Please check the following information how to install it:
a) Follow these instructions for step-by-step guidance on how to remove and replace your printhead.
b) If your printer is not powered on, press ON.
c) Lift the printer access door and wait for the carriage to move to the center position.
d) Remove any paper that may be loaded in the printer.
e) Remove both ink cartridges.
f) Unlatch the used printhead by pressing the button on the left.
g) Lift the used printhead out of the carriage.
h ) Remove the 3 plastic protective shields from the new printhead.
i) Place the printhead into the carriage
j) Push firmly against the back wall of the printehad until you hear a load snap.
k) Intall the new ink cartridges and make sure you hear the click into position.

If you need further assistance, please contact our Kodak technical support available at 1.800.421.6699, 7:00 A.M. to midnight, 7 days a week.

Jan 16, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Wanting guidance to link up PixmaMP160 copier (1 year old), to newly acquired Dell Aspiron 531S. thanks, Frank


Have not had much success with assistance considering this Dell desk top is one week old. Dell were suggesting Icontact Canon as the printer is one of there's.
Spoke with Canon and received EXCELLENT service without hesitation and free of any charge.
Thanks for your follow up.
Best Regards
Frank

Jul 22, 2008 | Cannon Office Equipment & Supplies

1 Answer

Called and spoke with tech who knew nothing about my inability to use printer and then lost connection with me. My printer does not work. Says "connection lost". Can you help?


Yes.

I need to know,
a. What make and model your printer is.
b. What type of connection to the printer exists (USB?)
c. What Operating System you have XP or Vista

Regards,
Worldvet

Jul 11, 2008 | Office Equipment & Supplies

1 Answer

HP 1100 printer issue


I am not sure if I already answered this but try a new toner. It sounds like the wiper blade flipped in the one that you have.

Feb 06, 2008 | HP LaserJet 1100 Printer

1 Answer

Service Call 020 Fatal Error


Error 020 is a ROM dimm error, could be as simple as reseating/replacing Rom Dimm or a expensive main PCB, you need to get hold of a oki dealer, contact oki to find closest OKI repair agent.
www.oki.com

Jan 08, 2008 | OKI C9300 Led Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

98914 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

64286 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...