Question about Linksys WRT54GX2 Wireless-G Broadband Router with SRX200 (LS-WRT54G2)

1 Answer

I would like to access the router using my laptop it keeps askingme for a password do not know which one it is

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 451 Answers

Are you connecting via wifi?
if you do not know the wireless network security key you can find it by logging into the router using a cat 5 cable with your laptop.
connect to the router config by browsing to 192.168.1.1 on internet explorer or another browser
the default login is blank the default password is admin if you have not changed it.
go to the wireless tab and click on wireless security.
the key should be listed below.

Posted on Mar 26, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Zyxel P660HW-T1 v2 and when trying to use laptop wirelessly, the internet connection keeps dropping. While connected to the router by ethernet cable, internet is fine. All was working fine until...


For that you need to change wireless channel type in router. You can also configure it with below method.
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on wireless->wireless channel type to 3 or 6 or 11 then save settings and restart router. . Let me know if you need further assistance. Thanks for using FixYa.

Jun 22, 2011 | Zyxel Prestige 660HW Wireless Router...

1 Answer

How do i conect another laptop to wireless


You need to know the password for your wireless signal. If you do know it, use the second laptop to search for your wireless name. Click on your wireless signal, and click join or connect. When prompted, type in your wireless password. If you don't know your wireless password, you are going to have to reset your router. Instructions on how to do that are here:http://en-us-support.belkin.com/app/answers/detail/a_id/48/~/performing-a-hardware-reset-on-the-router.
Then you will have to connect a ethernet cable between the router and a laptop to access the router's menu to create a new wireless name and password. Open your web browser (like Internet Explorer or Mozilla Firefox) and go to the address Http://192.168.1.1 The password should be blank.

Mar 08, 2011 | Belkin Wireless-G Plus MIMO Router

1 Answer

How do I access my router settings using the http://192.168.1.1? I set it up on another computer and always accessed it from there, Now I cannot access it from my laptop


hey,

you need to connect your laptop to the wireless router over wireless or wired connection and then access the page.

if you intend to change the settings, then its preferred that you have a wired connection to the router.


BTW, keep the routers admin password handy..


Cheers!!!

Feb 21, 2011 | Linksys Wireless-G WRT54G Router

1 Answer

My laptop keeps acquiring network address. Please suggest what to do ? Router --> Modem --> Desktop. Laptop is for wireless connection


For that you need to enable DHCP on router.Then your computer get ip address automatic from router.Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on DHCP enable it save settings and restart router. Let me know if you need further assistance. Thanks for using FixYa.

Nov 27, 2010 | Zyxel Prestige 320W Wireless Firewall...

2 Answers

Have computers, nonfamily member computers, in the neighborhood, accessing my computer. In particular pirated music of which I've received a warning letter from my inter-net carrier. How can safe guard...


You need to set up a network password. The easiest is to set up WEP (wired equivalent privacy). Chapter 3 of the user manual (downloadable from http://kb.netgear.com/app/) will give you a tutorial and will walk you through set up. This will keep others from using your wireless access. Make sure that you record your network password for use with your other wireless units.
Let me know if you have any further questions.
Please rate this solution.

Oct 21, 2010 | NetGear WGR614 Wireless Router

1 Answer

Keep getting "limited access" when connecting to netgear wpn824v3


This problem occurs because of ip conflicts in network. For that you need to enable DHCP on router or need to change ip address in computers as your network range. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on DHCP enable it then save settings and restart router.. Let me know if you need further assistance. Thanks for using FixYa.

Oct 07, 2010 | Computers & Internet

3 Answers

What is the password trying to set up my laptop for internet connection and it keeps asking for the password. I am using a actiontec GT704WG router


i believe you are referring to the network key,contact your internet service provider and have them personalized the password or try to access the router,type 192.168.1.1,username: admin password: password, once you are able to access the router,you will be able to personalized the password,but what i suggest is to contact ISP

Jun 28, 2010 | Actiontec GT704WG Wireless Router...

1 Answer

I have lost the password for my LIVEBOX C640 router on orange. I am connecting a new NETBOOK but it keeps asking for the password. My original laptop still operates on the router wireless


If you have forgotten your wireless security password then you need to add new password because it is saved in * and # format so you need to add new code.
You need to configure your router.
For that Connect your router to computer with ethernet cable then you can access it with following default link.
http://192.168.0.1
or
http://192.168.1.1
If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router.
Click on wireless settings enable wireless then enable WEP Security then add WEP code .It isyour password to connect wi fi.Then save settings and restart router.
Then you can connect your wi fi network with that code.
Let me know if you need further assistance.
Thanks for using FixYa.

Apr 05, 2010 | Computers & Internet

1 Answer

I have bought an Apple Mac notebook but am having problems accessing the internet. I think I have inadvertently changed the password to the wireless router as I have succesfully conected my main computer...


This is a confusing report. If you are successfully connecting two other computers to the router using the original router password, why can't you connect your MacBook Pro to the router using the same password? Or is it that the other two computers "know" the original password but you don't?
If one of the other two computers is a Mac, use the Keychain Access utility to look up the stored password for the router.
If not, use one of the other two computers to access the router's configuration screens directly and obtain the password that way.

Nov 15, 2009 | Apple MacBook Pro Laptop Computer with...

1 Answer

Internet connection


If you have access to the router, you can reset it by holding down the reset button on the router and then plugging in the power.

Once reset, you should be able to use the manufacturers username and password to gain access and set up the device.

Most bluetooth devices have a password of '0000' as the default.

Nov 01, 2008 | Computers & Internet

Not finding what you are looking for?
Linksys WRT54GX2 Wireless-G Broadband Router with SRX200 (LS-WRT54G2) Logo

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...