How do I set my e-mail to Craigslist? I would like to answer adds but messages wont go through.

The Uniden XDECT 8315 does not have an answering machine. It will check your voice mail. Setting that greeting depends on your telephone service provider. Check your provider's voice mail FAQ.

To have your XDECT 8315 get your voive mail messages, press Message and then select Voice Mail. Then follow the prompts to enter your voice mail access number. Alternatively, you can press Menu > Global Menu Settings > Edit Voice Mail. See pages 17 and 32 of the manual. (See the link below.)

The manual for the XDECT 8315 is available on the product page: https://uniden.com.au/product/xdect-8315-1/ . The current link to the manual is https://uniden.com.au/wp-content/uploads/2017/06/XDECT_83151_OM.pdf .

If you do not have voice mail from your telephone company, you can add a stand-alone answering machine. Just make sure to connect the answering machine to the telephone jack. Then connect the answering machine RJ-11 out to the telephone's RJ-11 jack on the base.

I hope this helps.

Cindy Wells

Your statement is slightly confusing. Is this a email issue or a Craig's list issue? If CL you need to contact their customer support.

how to video above.

Catherine,

This is is a message from Gmail. You could add a star, to make it easy for you to see what mail you still have to answer. Just if you like to "star" a mail.
Down here I placed a screen shot from the Gmail page, explaining what a starred message is. The page I got this, you can open by clicking on the link.
Success

Starred messages

I think you need to save the picture as a .jpg You will then have saved the picture in your pictures folder. You should then be able to upload the picture to craiglist. If there is still aproblem I suggest you contact craiglist at this link(How to add images)
http://www.craigslist.org/about/help/images

If you do not have an answering system (answering machine) on the phone, you need to purchase a answering machine or contact your telephone service provider to get Voice Mail service from them. (Most charge $3-5 per month for voice mail.) The provider will tell you what number to call to set up a voice mail message and access messages.

I hope this helps.

Cindy Wells
(for most Uniden systems with the answering system, you need to turn it on and then access the system from the handset to set the out-going message and length of incoming messages allowed.)

To put the message in a specific mail box, the caller needs to press *1, *2 or *3 (touch tone phone) before leaving their message. (Of course the answering system has to pick up before the key stroke.) Obviously the number corresponds to the mail box that will get the message.

So if you want to include these directions in your outgoing message, you would need to add something like "To leave a message for John press Star 1, for Sam press Star 2" when you record the ogm.

The manual for the answering system is available from Radio Shack. See http://www.radioshack.com/product/index.jsp?productId=2257360#tabsetBasic . The direct link to the English version of the manual is http://www.radioshack.com/graphics/uc/rsk/Support/ProductManuals/4303829_PM_EN.pdf .

I hope this helps.

Cindy Wells

Dear sqr_renee_03,hope this information was useful to you.PLEASE RATE THIS
                       >  Access your POP3 or IMAP4 e-mail account with your phone to read, write, and send email. >Before you can use e-mail, you must have an e-mail account and the correct settings.To check the availability and the settings of your e-mail account, contact your e-mailservice provider. You may receive the e-mail configuration settings as a configurationmessage.
>E-mail setup wizardThe e-mail setup wizard starts automatically if no e-mail settings are defined in thephone. 
>To start the setup wizard for an additional e-mail account, select Menu >Messaging and the existing e-mail account. Select Options > Add mailbox to startthe e-mail setup wizard. Follow the instructions on the display.
>Write and send an e-mailTo write an e-mail, select Menu > Messaging > Create message > E-mailmessage. To attach a file to the e-mail, select Options > Insert. To send the e-mail,press the call key. Select the desired account if necessary.
>Download e-mailTo select the retrieve mode, select Menu > Messaging > Message settings > E-mailmessages > Edit mailboxes and the desired mailbox, and Downloading settings >Retrieve mode.To download e-mail, select Menu > Messaging and the desired mailbox; confirm thequery for connection if necessary.
thankyou

Try again make this settings my friend

The Mail tab is where you send and receive e-mail messages. Including Outlook E-mail, you can add up to four POP3/IMAP4 and web-based e-mail accounts in this tab.
To add an e-mail account
1. On the Home screen, slide your finger to the Mail tab.
2. If this is your first time to add an e-mail account, touch New Account on the bottom-right side of the screen.
3. Set up your e-mail account using the E-mail Setup wizard.
4. To add another e-mail account, touch Menu > Accounts > New Account and use the E-mail Setup wizard to set up your account.
For detailed instructions on setting up e-mail accounts using the E-mail Setup wizard, see Chapter 6.
To check e-mail
When there are new e-mails, the icon on the Mail tab and the respective icons of the e-mail accounts will show the number of newly received messages.





If you have installed the synchronization software on your computer and created a partnership with your device, then your device is ready to send and receive Outlook e-mail.
If you have not yet installed the synchronization software nor created a partnership, do so by following the procedures in Chapter 5.
Tip To set up your company e-mail account so that you can access Outlook e-mail messages wirelessly, you must set up your device to synchronize via an over-the-air connection with your company’s Exchange Server. For more information about synchronizing with your company e-mail server, see Chapter 7.
Add an e-mail account
To add a new e-mail account, you can do one of the following:
On the TouchFLO 3D Home screen, slide to the Mail tab and then touch Menu > Accounts > New Account; or
Tap Start > Messaging > Setup E-mail.
The E-mail Setup wizard then opens and lets you enter your e-mail account settings. See “E-mail Setup Wizard” in this chapter for details.

any time you are on anypage and it has a link to email them OR somebody, internet explorer (IE), will open your default mail program and ask you to fill out the email message BUT, you have not setup THAT email program (in XP it is most likely Outlook express, in Vista it is Windowsmail). SO if it is not set up right with all the info that your (ISP, (insternet service provider), like incoming mail server and the outgoing mail server, and the user name and pasword), the program will have no idea how to send that new email message that you triggered when clicking on the craigs list link). to find out which program is by default is trying to open up, while you are in IE, ( if that is in windows XP), click tools/internet options/prgrams and you will see it in front of email program., if you have VISTA, then click --> tools/internet options/prgrams/set programs/set default programs/then click on Windows mail and set it up as your Default prgram for email sending and receiving. ) but you need to make sure you get all the info from you ISP first, it a matter of fact they might be able to help set it up for you (depends on your ISP of course).
good luck