Question about Invacare Health & Beauty

1 Answer

Blinking yellow light plus thespeed button is broken and i cannot increase the speed enough to move fast enough to be able to safely move in traffic

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 692 Answers

Horne the blinking yellow light is an error code and tells you have a problem with the chair. The speed button will have to be replaced by ordering a new faceplate for the joystick. You shouldn't be driving the chair in traffic but if you have to be very careful you could get a ticket or worse yet run over. I would contact a repair service to fix your chair if Medicare paid for it they will pay for 80% of the repair. Contact Repair Express @ 1-877-581-3733 or Roadrunner Mobility @ 1-800-467-2668 if you would like to get it repaired Hope this helps

Posted on Mar 26, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to an Expert (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the speed range for moving our Miele Solaris S 514 horizontally over the carpet for optimum weekly dust removal?


When the dust is gone the speed is correct . You should use a back and forth movement so the rug fibers contact the machine efficiently. There is no perfect speed since the amount of dust in a carpet is not uniform. Hi traffic areas will require more time spent removing dirt than an area close to the wall here there is no foot traffic.

Aug 14, 2016 | Miele S514 Solaris Electro Plus Vacuum

1 Answer

My R15 v2 YZF engine light blinks 10 times firsts 5 blinks slow rest very fast bike tends to stop whenever it appears n stop but when the light is on upper the bikes dont stop above 90 km/hr not stop


Yamaha yellow blinking light start Motorcycles Questions ...

www.fixya.com > ... > Tags > yellow blinking light start > Motorcycles
Ad. Question about 1997 YZF 750 R ... oil light blinking on 2004 yamaha r1 oil lightblinks 10 times stops then blinks 10 ... My yamaha r15 v2 I drive to bike after sometimes yellow engine light on aftersometime I light on to yellow engine light of.

Yamaha blinking yellow light Questions & Answers - Fixya

www.fixya.com > Forum > Tags > blinking yellow light
oil light blinking on 2004 yamaha r1 oil light blinks 10 times stops then blinks 10 times ... Question about 2008 YZF-R15 ... My yamaha r15 v2 I drive to bike after sometimes yellow engine light on aftersometime I light on to yellow engine light of.

[Ownership Thread]: Yamaha YZF-R15 - xBhp.com

www.xbhp.com/talkies/.../4854-yamaha-yzf-r15-1951-print.html

Jul 11, 2013 - 4 posts - ‎3 authors
2months back i got this problem while riding the engine goes off, but ... of heavy traffic after transporting it from my home town. then it works fine and all of a sudden i find the bike engine light blinking. it reads '42'. then after showing it to ... the ECU alone wil cost me to 10k. and obviously it is very expensive ...

Yamaha YZF-R15 version 2.0 - xBhp.com

www.xbhp.com/.../20138-yamaha-yzf-r15-version-2-0-a-786-print.html
Nov 26, 2013 - According to me the problem of chain with my bike is because i ... list about the required changes at 10k kms like Fork oil change and ... On switching on the ignition, the engine malfunction light, the orange(?) ... From your description that a longblink coupled with 3-4 short blinks it .... All times are GMT +6.5.

Yamaha YZF-R15 version 2.0 - xBhp.com


Jan 27, 2016 | Motorcycles

1 Answer

My freezer has a different code number;ZFT710FW.I put quite a lot of food into the freezer yesterday and the alarm now keeps sounding,I have put the temperature up but the red light is still flashing...


Red Alarm Indicator Light
Under normal operating conditions, the internal temperature of the freezer will ensure the long-term conservation of the stored food. When such temperature rises above a certain level (-12 °C), the appliance will trigger an acoustic and light alarm. The light alarm is a blink red light (Red Alarm Indicator Light), while the acoustic alarm is an intermittent sound.
You can stop the acoustic alarm by pressing the Acoustic Signal Stop Switch once.

When switching on the freezer for the first time, the Red Alarm Indicator Light will blink until the internal temperature has reached a level required for the safe conservation of frozen food.

Fast Freeze function
If more than 3-4 kg of food is to be frozen:
1. Press the Fast Freeze Switch for 2-3 seconds to activate the fast-freeze function 6-24 hours before placing the fresh food in the freezer, the Yellow Fast Freeze Indicator Light will illuminate. The compressor will now run continuously, to ensure that the fresh food is frozen as quickly as possible.
2. It is possible to deactivate the function at any time by pressing the Fast Freeze Switch for 2-3 seconds.
3. Place the foods in the freezing compartments (indicated with graphics).
4. Once the food is completely frozen (it may take up to 24 hours) you can manually switch off the fastfreeze function by pressing the Fast Freeze Switch for 2- 3 seconds and the Yellow Fast Freeze Indicator light will also go out.
5. Move frozen food from the freezing compartments into the other compartments (storing compartments) to make room for another freezing.

If the Fast Freeze Switch is accidentally left on, the fast-freeze function will be automatically switched off 48 hours later. The Yellow Fast Freeze Indicator light will also go out.

I believe that you all understand. If you intend to freeze larger amount of food then certainly a few hours before some shopping switch on the fast freeze function.

Dado

Apr 26, 2013 | Zanussi ZFT710W Freezer

1 Answer

B180 does not build up speed in gear 1,2,3 and black smokecomes from the exuast


Too much fuel. have fuel pressure tested or adjustments to the system.

Aug 09, 2017 | Cars & Trucks

1 Answer

Nixon S8100 fairly new camera, nice pics if the subject doesnt move but horrible pictures if object moves. Very blurry.


If everything in the picture is blurry, you are moving the camera when you press the shutter button. If only the subject is blurry and the background is clear the problem is too slow shutter speed. If this is cause by movement of the camera you must learn to SQUEESE the button while being sure you don't move the camera. It just takes a little practice. If this problem caused by a shutter speed that is too slow, it is remedied by increasing the ISO "film" speed. Even though you have no film, the camera has a "speed" setting that relates to that. The higher ISO value increases the camera's sensitivity to light and thus allows for faster shutter speed. Normally the ISO choices are 100, 200, 400, 800, 1600. Try using 400. The ISO setting is in one of your camera menus. 400 is fast enough to solve your problem in all but very fast movement of either the camera or subject. Using ISO above 400 will cause your pictures to look grainy and not as sharp. Use the highest speed only when absolutely necessary. Slower ISO numbers produce the finest grain and thus the sharpest pictures. It a trade off between ISO and shutter speed because the exposure is a combination of the ISO and shutter speed and lens opening. Each one effects the exposure by half or double.

Apr 16, 2011 | Nikon Cameras

1 Answer

BLURY PHOTOS YELLOW TRIANGLE HAND EXCLAIMATION WARNING SYMBOL


It indicates the shutter speed is too slow for you to hold it by hand without something like a tripod.
Either there's not enough light in the conditions you're taking the pictures in, or you need to try changing the settings on the camera, such as increasing the ISO setting, or light sensitivity, so it can use a faster shutter speed.
If it's close range, turn on the flash.
If you can't change the settings, you can try bracing your hand against a fixed object so that the camera doesn't move, and just gently squeeze the button to take the picture. Novices frequently jab the shutter release to take pictures, which will cause blurry pictures from the camera moving.

Dec 31, 2010 | Pentax Optio M30 Digital Camera

1 Answer

How do you take a picture of a fast movement?


It depends on the effect you want.
  • To freeze motion, you need either a fast shutter speed, or a fast flash in a dark environment. In less than bright light you may not be able to get a fast enough shutter speed to stop the action. Increasing the camera's sensitivity to light by increasing the ISO will help some.
  • You can blur the motion by using a slower shutter speed and a stable camera. Set a slow shutter speed and put the camera on a tripod or other stable surface, and you can get things like streaking car taillights and star trails. How slow a shutter speed depends on the speed of the subject.
  • You can pan with the subject. Move the camera with the subject, and keep it moving even while the display blanks out while taking the picture. This will keep the subject sharper while blurring the background to lend a sense of motion to the picture.
  • It's either to freeze motion if the subject is moving straight toward or away from you than if it's moving across your field of vision.

Sep 10, 2010 | Canon PowerShot S2 IS Digital Camera

2 Answers

I have a 1999 escort that the battery light is blinking when you rev the engine...all parts check ok, it only does it when you rev it fast , regular driving and easy take off it does not blink


Put a volt meter on the battery, and rev the engine until the light blinks, do not hold it there, just reach that engine speed breifly, watch the meter, does the voltage increase or decrease? If it does then your voltage regulator may be going bad, the regulator is inside the altenator, which may require replacement. It can be related to a wire that is broken or partially broken, so wiggle the wires at the altenator and battery while the engine is running at idle and conducting this test. Hope this helps, let me know

Dec 11, 2009 | 1999 Ford Escort

Not finding what you are looking for?
Health & Beauty Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Invacare Health & Beauty Experts

wcdoc1953
wcdoc1953

Level 2 Expert

280 Answers

Colin Taylor

Level 2 Expert

347 Answers

gnshome

Level 1 Expert

31 Answers

Are you an Invacare Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...