Question about Razor A2 Folding Kick Scooter Red
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
There are two steps to release the handle for folding. Pressing the thumb lever is one step and the other is lifting the handle bracket up. The handle is held in place by two metal pins (one on each side of the handle bracket). The pins slip down into a notch on the scooters bottom bracket. If the lever won't push, you will need to spray some WD-40 or other lubricant on it as they do tend to rust. Once you have the thumb lever where it can be pressed down, you can then lift the handle out of the bottom bracket. This may be stuck as well so a light tap with a hammer may be necessary to release the handle.
Posted on May 01, 2009
Call MGA toll free 1 800 222 4685 and they will walk you through the procedure. You have you put one hand on the slanted bar with the yellow label on it and one hand on the foot board and push in and down at the same time. Push at the same angle as the slanted bar. I couldn't get ours open either so I called the company - Good Luck!
Posted on Mar 19, 2009
There are 3 things that can fold.
The handlebars collapse from the lever on top of the handle bar, that allows each handle to pull out.
The lever at the base of the handlebar allows it to retract.
And the lever at the base of the steering allows the body to fold against the steering shaft.
Posted on May 28, 2010
Tips for a great answer:
Mar 14, 2018 | Sport & Outdoor - Others
Dec 19, 2011 | Dynacraft Barbie Aluminum Folding Scooter
May 28, 2010 | Razor 'A' Scooter-Clear
Oct 29, 2009 | ElectroVoice EV Rider FTCA020 Caddy Fold N...
Sep 23, 2009 | Razor Pro Model Kick Scooter Fun Kid...
Mar 31, 2009 | Razor Scooters Cruiser Scooter
1,596 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: